Difference between revisions of "PinePhone Pro"

Jump to navigation Jump to search
m (Added macOS process for determining if Maskrom mode enabled)
Line 110: Line 110:
{{Info|Confirm that the label of the button says ''RE'' and not ''RESET''! If the button label says ''RESET'' instead you probably have a regular PinePhone and you're reading the wrong page.}}
{{Info|Confirm that the label of the button says ''RE'' and not ''RESET''! If the button label says ''RESET'' instead you probably have a regular PinePhone and you're reading the wrong page.}}
* Connect the phone to an USB port of a computer, while still holding the button for some time
* Connect the phone to an USB port of a computer, while still holding the button for some time
* Check if the phone in Maskrom mode appears in the output of the terminal command <code>lsusb</code> on the computer, the expected ''VID:PID'' of the device is ''2207:330c'' (under ''Windows'' this can be checked using the ''Device Manager'' and checking the VID and PID of an appearing ''Unknown device'')
* Check if the phone in Maskrom mode appears in the output of the terminal command <code>lsusb</code> on the computer, the expected ''VID:PID'' of the device is ''2207:330c''
**(under ''Windows'' this can be checked using the ''Device Manager'' and checking the VID and PID of an appearing ''Unknown device'')
**(under ''macOS'' this can be checked in ''/Applications/Utilities/System Information.app'' under ''USB'' and checking the VID and PID of an appearing ''Composite Device''
* Let the phone charge for at least two hours
* Let the phone charge for at least two hours