Difference between revisions of "PinePhone Modding"

From PINE64
Jump to navigation Jump to search
(added new page)
(fixes)
 
(7 intermediate revisions by 4 users not shown)
Line 3: Line 3:
Some are upgrades to fix issues that were not done optimally in the production of that version of the electronics, and some are to add options that were not part of the phone spec.
Some are upgrades to fix issues that were not done optimally in the production of that version of the electronics, and some are to add options that were not part of the phone spec.


== PRO TIP ==
== General ==
Make pictures of the situation before and after your mods, so you can comare the change, and don't need to disassemble the device to get the right pics later.
Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.


==Device Specific Mods ==
== Laser cut parts ==
There are a nr of upgrades possible for the different versions of the PinePhone.
Mcyam2 has created some laser cut templates for the rear facing components here:
 
https://imgur.com/a/LAUatOa
 
https://anonfiles.com/L0BeK5L5oe/ppsvg-backplate-CUTOUT_svg
 
Originally based on silver's work on a 3d printed rear frame
 
== 3D Printed parts ==
 
Silver has created a 3D-printable rear frame for the PinePhone and used it to create a folding keyboard design (work in progress), [[User:Silver/3d printed a folding keyboard mostly]].
 
https://ibb.co/album/ScDttH
 
https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup
 
== PCBs ==
 
https://github.com/SMR404/PinephonePogoBreakout
 
https://github.com/jnavarro7/pinephone_flex_breakout_board_grove
 
== Device Specific Mods ==
 
There are a number of upgrades possible for the different versions of the PinePhone.
 
=== Braveheart Edition ===
 
{{Warning|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}
 
* PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
* VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.
 
==== PMIC mod ====
 
[[PinePhone_1.1_VBUS_power_usage_Hardware_Fix]]
 
The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg


=== "Don't be evil" ===
==== VCONN mod ====
*


=== BraveHeart ===
See below.
*PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
*VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.


=== UBPorts Community edition ===
=== Braveheart Edition and UBPorts Community Edition ===
*VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.
 
{{Warning|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}
 
* VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.


There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a number of options to change the screen protector.
There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a number of options to change the screen protector.
Line 23: Line 60:
At this moment there are not many pogo addons, and most are just connector boards. Likely the makers will add links to these projects to this page. Pine is looking into adding a N900 style keyboard attached to these pins.
At this moment there are not many pogo addons, and most are just connector boards. Likely the makers will add links to these projects to this page. Pine is looking into adding a N900 style keyboard attached to these pins.


== PMIC mod ==
==== VCONN mod ====
[[PinePhone_1.1_VBUS_power_usage_Hardware_Fix]]
The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg
== VCONN mod ==
The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-usbc-fix.jpg
The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-usbc-fix.jpg
There is a discussion on the merits of the different ways to do the fix
There is a discussion on the merits of the different ways to do the fix


=== VCONN mod, Removal only ===
===== VCONN mod, Removal only =====
[[PinePhone_1.2_VCONN_Hardware_Fix]]
[[PinePhone_1.2_VCONN_Hardware_Fix]]


Line 44: Line 78:
*OK - Firmware Applied, you are all set
*OK - Firmware Applied, you are all set


=== VCONN mod, Replacement ===
===== VCONN mod, Replacement =====
Using 2x NCP334FCT2G you could do the full fix, making VCONN powered devices able to negotiate power. IT needs the parts to be removed first without damaging the pads, and then replacing the parts.
Using 2x NCP334FCT2G you could do the full fix, making VCONN powered devices able to negotiate power. IT needs the parts to be removed first without damaging the pads, and then replacing the parts.


==Laser cut parts==
Mcyam2 has created some laser cut templates for the rear facing components here:
https://imgur.com/a/LAUatOa
https://anonfiles.com/L0BeK5L5oe/ppsvg-backplate-CUTOUT_svg
Originally based on silver's work on a 3d printed rear frame
==3D Printed parts==


[[Silver 3d printed a folding keyboard mostly]]
[[Category:PinePhone]]
 
 
Silver has created a 3d printable rear frame for pinephone, and used it to create a folding keyboard design (work in progress).
 
https://ibb.co/album/ScDttH
 
https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup

Latest revision as of 03:14, 16 March 2023

There are a number of options to hardware mod the PinePhone.

Some are upgrades to fix issues that were not done optimally in the production of that version of the electronics, and some are to add options that were not part of the phone spec.

General

Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.

Laser cut parts

Mcyam2 has created some laser cut templates for the rear facing components here:

https://imgur.com/a/LAUatOa

https://anonfiles.com/L0BeK5L5oe/ppsvg-backplate-CUTOUT_svg

Originally based on silver's work on a 3d printed rear frame

3D Printed parts

Silver has created a 3D-printable rear frame for the PinePhone and used it to create a folding keyboard design (work in progress), User:Silver/3d printed a folding keyboard mostly.

https://ibb.co/album/ScDttH

https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup

PCBs

https://github.com/SMR404/PinephonePogoBreakout

https://github.com/jnavarro7/pinephone_flex_breakout_board_grove

Device Specific Mods

There are a number of upgrades possible for the different versions of the PinePhone.

Braveheart Edition

Warning: These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.
  • PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
  • VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.

PMIC mod

PinePhone_1.1_VBUS_power_usage_Hardware_Fix

The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg

VCONN mod

See below.

Braveheart Edition and UBPorts Community Edition

Warning: These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.
  • VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.

There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a number of options to change the screen protector.

At this moment there are not many pogo addons, and most are just connector boards. Likely the makers will add links to these projects to this page. Pine is looking into adding a N900 style keyboard attached to these pins.

VCONN mod

The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-usbc-fix.jpg There is a discussion on the merits of the different ways to do the fix

VCONN mod, Removal only

PinePhone_1.2_VCONN_Hardware_Fix

There are now a few documented ways,

There are hopefully videos coming doing it the proper way, and so they can be linked here.

After this the firmware for the power negotiation chip needs to be upgraded, this can be done by running the factory test image, version http://images.postmarketos.org/pinephone/pine64-pinephone-20200724-factorytest55.img.xz or higher. This will do the firmware flashing and respond with a message indicating the state. After this the phone is ready for its added functions. ANX states:

  • No CC Fix - Fix not applied
  • No USB Cable - No USBC connection, cannot upgrade firmware
  • OK - Firmware Applied, you are all set
VCONN mod, Replacement

Using 2x NCP334FCT2G you could do the full fix, making VCONN powered devices able to negotiate power. IT needs the parts to be removed first without damaging the pads, and then replacing the parts.