Difference between revisions of "PinePhone Installation Instructions"
Jump to navigation
Jump to search
(→From the booted microSD OS (risky): removed wrong sentence) |
(→From the booted microSD OS: typo) |
||
| Line 50: | Line 50: | ||
# Open terminal and <code>git clone [url]</code> your desired project OR: Open web browser and download the desired OS image file. | # Open terminal and <code>git clone [url]</code> your desired project OR: Open web browser and download the desired OS image file. | ||
# Build the OS (Optional) | # Build the OS (Optional) | ||
# Flash the resulting image file you got by downloading or by building, to eMMC, using <code>dd if=new-pinephone-image.img of=/dev/ | # Flash the resulting image file you got by downloading or by building, to eMMC, using <code>dd if=new-pinephone-image.img of=/dev/mmcblkX bs=1M status=progress</code> where X is the number label of the eMMC. Use the command ''lsblk'' to check your devices: typically with the current kernel the SD card is /dev/mmcblk0 and the eMMC is /dev/mmcblk2 but as always with ''dd'' be extremely cautious to get the devices correct. Then, resize partition to fill up entire disk (see below). | ||
# Turn off phone, remove SD card. Turn on phone. | # Turn off phone, remove SD card. Turn on phone. | ||