Difference between revisions of "PinePhone 1.2b R1318 backlight Hardware Fix"

From PINE64
Jump to navigation Jump to search
(Created page with "{{under construction}} This page details a hardware fix for an issue that was found on early PinePhone hardware revisions (see PinePhone#Hardware revisions for an overvie...")
 
Line 4: Line 4:


== Affected Units ==
== Affected Units ==
# Requires confirmation: [[Project Don't be evil|"Project Don't Be Evil" devkit]]
# Requires confirmation: [[PinePhone v1.0 - Dev|PinePhone v1.0 - Developer batch]]
# [[PinePhone v1.1 - Braveheart]]
# [[PinePhone v1.2‎]] - UBports Community Edition
# [[PinePhone v1.2‎]] - UBports Community Edition
# [[PinePhone v1.2a‎]] - postmarketOS Community Edition
# [[PinePhone v1.2a‎]] - postmarketOS Community Edition

Revision as of 11:45, 13 April 2021

This page or section is under construction

Please help to review and edit this page or section. Information are subject to change.

This page details a hardware fix for an issue that was found on early PinePhone hardware revisions (see PinePhone#Hardware revisions for an overview of the different revisions) and has been fixed since the 1.2b hardware revision.

Affected Units

  1. PinePhone v1.2‎ - UBports Community Edition
  2. PinePhone v1.2a‎ - postmarketOS Community Edition

Disclaimer

This fix requires desoldering a tiny resistor, therefore some experience with soldering is highly recommended.

Issue description

Fix

Sources and tutorials