Difference between revisions of "PinePhone (Pro) Add-ons"

From PINE64
Jump to navigation Jump to search
(→‎Credit: fiox)
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{under construction}}
== Keyboard ==
 
[[File:PP_KB_Front-1024x576.jpg|400px|thumb|right|Picture of the PinePhone (Pro) Keyboard]]
 
= Keyboard =


''Main article: [[PinePhone (Pro) Keyboard]]''
''Main article: [[PinePhone (Pro) Keyboard]]''


The keyboard case works with both the PinePhone and PinePhone Pro and features a clam-shell design. It uses pogo pins located on the phone’s midsection and attaches by replacing the default back cover. When folded, the phone’s screen and the keyboard rest securely against each other. The hinge features a 180° design, which not only allows for two-hand typing on a surface but also for comfortable thumb-typing when fully extended. The etched keycaps can be easily relocated for alternate layouts such as AZERTY or QWERTZ. The keyboard case runs an [https://xff.cz/git/pinephone-keyboard/ open firmware], which means that anyone with the know-how can alter existing functions or add new ones. The bottom (keyboard) and top (phone) sections of the assembly are well-balanced thanks to the large, 6000mAh, internal battery capable of charging the PinePhone (Pro) during operation. The internal battery effectively triples the phone’s battery life. The internal keyboard battery can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported OSes; the keyboard remains functional with the battery fully depleted.
The keyboard case works with both the PinePhone and PinePhone Pro and features a clam-shell design. It uses pogo pins located on the phone’s midsection and attaches by replacing the default back cover. When folded, the phone’s screen and the keyboard rest securely against each other. The hinge features a 180° design, which not only allows for two-hand typing on a surface but also for comfortable thumb-typing when fully extended. The etched keycaps can be easily relocated for alternate layouts such as AZERTY or QWERTZ. The keyboard case runs an [https://xff.cz/git/pinephone-keyboard/ open firmware], which means that anyone with the know-how can alter existing functions or add new ones. The bottom (keyboard) and top (phone) sections of the assembly are well-balanced thanks to the large, 6000mAh, internal battery capable of charging the PinePhone (Pro) during operation. The internal battery effectively triples the phone’s battery life. The internal keyboard battery can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional with the battery fully depleted.


You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.
You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.


== Document ==
Store page: [https://pine64.com/product/pinephone-pinephone-pro-keyboard-case/ pine64.com]


* [https://files.pine64.org/doc/PinePhone/USER%20MANUAL-KEYBOARD-V2-EN-DE-FR-ES.pdf PinePhone Keyboard 4 language user manual ver 2.0 in PDF format]
== LoRa Add-on ==
* [https://files.pine64.org/doc/PinePhone/USER%20MANUAL-KEYBOARD-V2-EN-DE-FR-ES.odt PinePhone Keyboard 4 language user manual ver 2.0 in ODT format]


== Schematics, Datasheet and certifications ==
Store page: [https://pine64.com/product/pinephone-pinephone-pro-pindio-lora-add-on-case/ pine64.com]


* Schematic:
[[File:PP LoRa.jpg|250px|Picture of the PinePhone (Pro) LoRa add-on]]
** [https://files.pine64.org/doc/PinePhone/PinePhone%20Keyboard%20Schematic%20V1.0-20211009.pdf PinePhone Keyboard Schematic ver 1.0 20211009]


* Datasheet:
Uses the pogo pins to interface a Semtech SX1262 LoRa module with the PinePhone (Pro).
** [https://files.pine64.org/doc/datasheet/pinephone/EM85F684A.pdf PEM85F684A USB Microcontroller Datasheet]
** [https://files.pine64.org/doc/datasheet/pinephone/IP5209.pdf IP5209 Power Bank SOC Datasheet]
** [https://files.pine64.org/doc/datasheet/pinephone/txs0104e.pdf TXS0104E 4-Bit Bidirectional Voltage-Level Translator Datasheet]


* Certifications:
{{note|Software for receiving and sending LoRa messages with this back cover does exist, however no PinePhone operating system has added support for it yet.}}
** [https://files.pine64.org/doc/cert/PinePhone%20Keyboard%20FCC%20Certificate-S21111804102001.pdf PinePhone Keyboard FCC Certificate]
** [https://files.pine64.org/doc/cert/PinePhone%20Keyboard%20CE%20Certificate-S21111804101001.pdf PinePhone Keyboard CE RED Certificate]


=== Schematics and Datasheet ===


= LoRa Add-on =
Schematic:
* [https://files.pine64.org/doc/PinePhone/Pinephone%20LoRa%20Back%20Cover%20Panel%20Schematic-v1.0-20210425.pdf PinePhone LoRa Back Cover Schematic ver 1.0 20210425]


[[File:PP LoRa.jpg|250px|Picture of the PinePhone (Pro) LoRa add-on]]
Datasheet:
* [https://files.pine64.org/doc/datasheet/pinephone/DS_SX1261-2_V1.1-1307803.pdf SX1262 Long Range, Low Power, sub-GHz RF Transceiver Datasheet]
* [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]


Uses the pogo pins to interface a Semtech SX1262 LoRa module with the PinePhone (Pro).
I2C to SPI firmware:
* [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]


{{note|Software for receiving and sending LoRa messages with this back cover does exist, however no PinePhone operating system has added support for it yet.}}
== Qi Wireless Charging Add-on ==


== Schematics and Datasheet ==
Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]


* Schematic:
{{warning|Possible safety hazard: If the wireless charging chip fails for some reason, do not plug the phone in to charge via USB-C. Take the back case off first. It is possible that power gets fed into the chip, causing it to overheat, possibly causing damage to the phone and creating a fire-hazard.
** [https://files.pine64.org/doc/PinePhone/Pinephone%20LoRa%20Back%20Cover%20Panel%20Schematic-v1.0-20210425.pdf PinePhone LoRa Back Cover Schematic ver 1.0 20210425]


Album of damage caused by reverse current: [https://imgur.com/a/dJsp5wD]


* Datasheet:
Until the cause of this is determined, it is recommended NOT to use the wireless charging add-on.}}
 
 
= Qi Wireless Charging Add-on =


[[File:PinePhone-Wireless-charger.jpg|250px|Picture of the PinePhone (Pro) wireless charging add-on]]
[[File:PinePhone-Wireless-charger.jpg|250px|Picture of the PinePhone (Pro) wireless charging add-on]]
Line 54: Line 45:
Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.
Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.


=== Schematics and Datasheet ===


== Schematics and Datasheet ==
Schematic:


* Schematic:
* [https://files.pine64.org/doc/PinePhone/PinePhone%20Q-Wireless%20Charger%20Back%20Cover%20Schematic-20210508.pdf PinePhone Wireless Charger Back Cover Schematic ver 1.0 20210508]
** [https://files.pine64.org/doc/PinePhone/PinePhone%20Q-Wireless%20Charger%20Back%20Cover%20Schematic-20210508.pdf PinePhone Wireless Charger Back Cover Schematic ver 1.0 20210508]


* Datasheet:
Datasheet:
** [https://files.pine64.org/doc/datasheet/pinephone/HL6111RFNWP5_V1p0_20190121.pdf HL6111RFNWP5 5W WPC Wireless Power Receiver Datasheet]


* [https://files.pine64.org/doc/datasheet/pinephone/HL6111RFNWP5_V1p0_20190121.pdf HL6111RFNWP5 5W WPC Wireless Power Receiver Datasheet]


== Fingerprint Reader Add-on ==


= Fingerprint Reader Add-on =
Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]


[[File:PinePhone-FP-Addon.jpg|250px|Picture of the PinePhone (Pro) fingerprint reader add-on]]
[[File:PinePhone-FP-Addon.jpg|250px|Picture of the PinePhone (Pro) fingerprint reader add-on]]
Line 73: Line 65:
{{note|No PinePhone operating system has added support for the fingerprint reader yet.}}
{{note|No PinePhone operating system has added support for the fingerprint reader yet.}}


=== Credits ===
Credit goes to the user ''zschroeder6212'', who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.
=== Schematics and Datasheet ===
Schematic:
* [https://files.pine64.org/doc/PinePhone/Schematic_fingerprint%20driver%20board%20V3_2021-01-24.pdf PinePhone Finger Print Back Cover Schematic ver 3.0 20210124]
Datasheet:


== Schematics and Datasheet ==
* [https://files.pine64.org/doc/datasheet/pinephone/Datasheet_PixelAuth_PIA_Module_P2SDS-NABL2-S05_V7.0.0.5.pdf P2SD Personal Identity Authentication Module Datasheet]
* [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]


* Schematic:
I2C to SPI firmware:


* [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]


* Datasheet:
[[Category:PinePhone]]
[[Category:PinePhone Pro]]
[[Category:PinePhone (Pro) Add-Ons]]

Latest revision as of 00:36, 16 March 2023

Keyboard

Main article: PinePhone (Pro) Keyboard

The keyboard case works with both the PinePhone and PinePhone Pro and features a clam-shell design. It uses pogo pins located on the phone’s midsection and attaches by replacing the default back cover. When folded, the phone’s screen and the keyboard rest securely against each other. The hinge features a 180° design, which not only allows for two-hand typing on a surface but also for comfortable thumb-typing when fully extended. The etched keycaps can be easily relocated for alternate layouts such as AZERTY or QWERTZ. The keyboard case runs an open firmware, which means that anyone with the know-how can alter existing functions or add new ones. The bottom (keyboard) and top (phone) sections of the assembly are well-balanced thanks to the large, 6000mAh, internal battery capable of charging the PinePhone (Pro) during operation. The internal battery effectively triples the phone’s battery life. The internal keyboard battery can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional with the battery fully depleted.

You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.

Store page: pine64.com

LoRa Add-on

Store page: pine64.com

Picture of the PinePhone (Pro) LoRa add-on

Uses the pogo pins to interface a Semtech SX1262 LoRa module with the PinePhone (Pro).

Software for receiving and sending LoRa messages with this back cover does exist, however no PinePhone operating system has added support for it yet.

Schematics and Datasheet

Schematic:

Datasheet:

I2C to SPI firmware:

Qi Wireless Charging Add-on

Store page: pine64.com

Warning: Possible safety hazard: If the wireless charging chip fails for some reason, do not plug the phone in to charge via USB-C. Take the back case off first. It is possible that power gets fed into the chip, causing it to overheat, possibly causing damage to the phone and creating a fire-hazard.

Album of damage caused by reverse current: [1]

Until the cause of this is determined, it is recommended NOT to use the wireless charging add-on.

Picture of the PinePhone (Pro) wireless charging add-on

Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.

Schematics and Datasheet

Schematic:

Datasheet:

Fingerprint Reader Add-on

Store page: pine64.com

Picture of the PinePhone (Pro) fingerprint reader add-on

Uses the pogo pins to interface a high quality fingerprint sensor, which uses open firmware for it's i2c bridge, and can also be used for gesture navigation thanks to it's ability to detect directional swipes.

No PinePhone operating system has added support for the fingerprint reader yet.

Credits

Credit goes to the user zschroeder6212, who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.

Schematics and Datasheet

Schematic:

Datasheet:

I2C to SPI firmware: