Difference between revisions of "PinePhone"
Jump to navigation
Jump to search
m (→PinePhone accessory: Accessories) |
(lang) |
||
Line 77: | Line 77: | ||
* '''Back [[#Camera|Camera]]:''' Single 5MP, 1/4", LED Flash | * '''Back [[#Camera|Camera]]:''' Single 5MP, 1/4", LED Flash | ||
* '''Front Camera:''' Single 2MP, f/2.8, 1/5" | * '''Front Camera:''' Single 2MP, f/2.8, 1/5" | ||
* '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if | * '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated) | ||
* '''Communication:''' | * '''Communication:''' | ||
** '''[[#Modem|Modem]]:''' [https://www.quectel.com/product/lte-eg25-g/ Quectel EG25-G] | ** '''[[#Modem|Modem]]:''' [https://www.quectel.com/product/lte-eg25-g/ Quectel EG25-G] | ||
Line 88: | Line 88: | ||
** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS | ** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS | ||
* '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass | * '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass | ||
* ''' | * '''Privacy switches:''' Modem, WiFi & Bluetooth, Microphone, Cameras | ||
* '''[[#Battery|Battery]]:''' Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery) | * '''[[#Battery|Battery]]:''' Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery) | ||
* '''I/O:''' USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification | * '''I/O:''' USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification | ||
Line 218: | Line 218: | ||
You can buy a serial debug cable from the [https://pine64.com/product/pinebook-pinephone-pinetab-serial-console/ PINE64 Store]. The store cable uses a 4 ring plug, as seen in the [https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf here], but a 3 ring plug works just as well. The cable uses a CH340 chipset based serial to USB converter, but any 3.3v serial connection can be used. Because it is a "host"/DTE it means that you need a ''cross modem cable'' ([https://en.wikipedia.org/wiki/Null_modem Null Modem]) with TX on Tip to be connected to RX. A cable like e.g. [https://www.ftdichip.com/Products/Cables/USBTTLSerial.htm FTDI TTL-232R-3V3-AJ] which has TX on Tip and RX on Ring fits perfectly. | You can buy a serial debug cable from the [https://pine64.com/product/pinebook-pinephone-pinetab-serial-console/ PINE64 Store]. The store cable uses a 4 ring plug, as seen in the [https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf here], but a 3 ring plug works just as well. The cable uses a CH340 chipset based serial to USB converter, but any 3.3v serial connection can be used. Because it is a "host"/DTE it means that you need a ''cross modem cable'' ([https://en.wikipedia.org/wiki/Null_modem Null Modem]) with TX on Tip to be connected to RX. A cable like e.g. [https://www.ftdichip.com/Products/Cables/USBTTLSerial.htm FTDI TTL-232R-3V3-AJ] which has TX on Tip and RX on Ring fits perfectly. | ||
== | == Privacy switch configuration == | ||
[[File:PinePhone Kill Interruptors de Maquinari del PinePhone 4529.jpg|320px|thumb|right|Detail of DIP switch]] | [[File:PinePhone Kill Interruptors de Maquinari del PinePhone 4529.jpg|320px|thumb|right|Detail of DIP switch]] |