PineNote Development

From PINE64
Revision as of 09:35, 31 August 2021 by CounterPillow (talk | contribs) (WIP page for general development notes for the PineNote)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This article seeks to provide general development information for the PineNote

Flashing Software

Currently, the only way to flash software is using rkdeveloptool.

Using rkdeveloptool

rkdeveloptool is a command line utility built on libusb.

Downloading and Building rkdeveloptool

PINE64 develops its own updated fork of rkdeveloptool on GitLab.

You will need to have libusb 1.0 and its development headers installed.

git clone https://gitlab.com/pine64-org/quartz-bsp/rkdeveloptool.git
cd rkdeveloptool
mkdir build
cd build
cmake ..

This sets up all the build files. You can then compile with make inside the build directory.

After you're done, you'll likely also need to install the udev rules, or else your user won't have permission to access the USB devices:

sudo cp 99-rk-rockusb.rules /etc/udev/rules.d/
sudo udevadm --control reload

Building Downstream U-Boot

While in maskrom mode, we need to have a u-boot to download onto the device for any of the other commands to work.

git clone -b quartz64 https://gitlab.com/pgwipeout/u-boot-rockchip.git
git clone -b rkbin https://github.com/JeffyCN/rockchip_mirrors.git
cd u-boot-rockchip
export CROSS_COMPILE=aarch64-none-linux-gnu-
make rk3566-quartz64_defconfig
./make.sh

Running rkdeveloptool

First, you'll want to make sure the device you've connected is in maskrom mode:

./rkdeveloptool ld

TODO: finish this section