Difference between revisions of "PineFlash"

From PINE64
Jump to navigation Jump to search
(Initial project goal and basic requirements)
(Correct ideal speeds and format table)
Line 7: Line 7:
 
== Requirements ==
 
== Requirements ==
  
{|
+
{| class="wikitable"
| Property
+
! Property
| Minimum
+
! Minimum
| Ideal
+
! Ideal
 
|-
 
|-
 
| Read speed
 
| Read speed
 
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (Full speed USB 1.x)
 
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (Full speed USB 1.x)
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (High speed USB 2.0)
+
| [https://en.wikipedia.org/wiki/USB#USB_2.0 480Mbit/s] (High speed USB 2.0)
 
|-
 
|-
 
| Write speed
 
| Write speed
 
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (Full speed USB 1.x)
 
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (Full speed USB 1.x)
| [https://en.wikipedia.org/wiki/USB#USB_2.0 12Mbit/s] (High speed USB 2.0)
+
| [https://en.wikipedia.org/wiki/USB#USB_2.0 480Mbit/s] (High speed USB 2.0)
 
|}
 
|}

Revision as of 17:44, 30 March 2021

The following is documentation for a proposed Pine64 product by the community and is not an official Pine64 product. This content is the result of initial discussions about this device documented in the forum.

Goal

The aim of this project is to create a Pine64 open source USB flash drive (hence the name PineFlash), that can act as the basis of future projects in this area. An open source flash device would allow the community to address storage information security (CIA). Additionally, issues such as speed and compatibility can also be addressed.

Requirements

Property Minimum Ideal
Read speed 12Mbit/s (Full speed USB 1.x) 480Mbit/s (High speed USB 2.0)
Write speed 12Mbit/s (Full speed USB 1.x) 480Mbit/s (High speed USB 2.0)