Difference between revisions of "PineBuds Pro"

From PINE64
Jump to navigation Jump to search
Line 30: Line 30:
** 4 pogo pins
** 4 pogo pins
** USB type-C port 5V 500mA
** USB type-C port 5V 500mA
== Work in progress ==
=== Silicone case ===
Goal is to make a silicone case like [https://www.amazon.com/dp/B0BGNBFY6Z this] for PineBuds Pro.
"Design a mold, use a hobby 3D printer to manufacture it, then fill with silicone." ([https://matrix.to/#/!OGWEsuBXqiRfaqvtfm:matrix.org/$8FgCtx9jh2ZLnDFNvf2yN5nKMzv4V7XAn-zwuWKxfSM?via=matrix.org&via=tchncs.de&via=envs.net source]) <br>
"You can find a local hackspace or makerspace. Or you can use one of the many services available via the Internet who can print a model for you. Just design, upload, and pay." ([https://matrix.to/#/!OGWEsuBXqiRfaqvtfm:matrix.org/$TD5kfUkVLfx9Sbx5t0Z2oCsUTvmS0FPrwQn0Xrr5YiQ?via=matrix.org&via=tchncs.de&via=envs.net source]) <br>
"The only one I know of is "https://www.pcbway.com/rapid-prototyping/injection-molding/"" ([https://matrix.to/#/!jnYVOKPfUvfPXbQIpt:matrix.org/$sJ_QPEsqeSsJ8hRjgoZhZ9QwxpnslvOuBpT7SkSffAE?via=matrix.org&via=tchncs.de&via=matrix.ravenfieldsystems.com source])


== Software releases ==
== Software releases ==
Line 53: Line 44:


* [https://files.pine64.org//SDK/PineBudsPro/PineBudsPro_SDK-20221128.7z PineBuds Pro "Little Whale" SDK date:20221128]
* [https://files.pine64.org//SDK/PineBudsPro/PineBudsPro_SDK-20221128.7z PineBuds Pro "Little Whale" SDK date:20221128]
== Work in progress ==
=== Silicone case ===
Goal is to make a silicone case like [https://www.amazon.com/dp/B0BGNBFY6Z this] for PineBuds Pro.
"Design a mold, use a hobby 3D printer to manufacture it, then fill with silicone." ([https://matrix.to/#/!OGWEsuBXqiRfaqvtfm:matrix.org/$8FgCtx9jh2ZLnDFNvf2yN5nKMzv4V7XAn-zwuWKxfSM?via=matrix.org&via=tchncs.de&via=envs.net source]) <br>
"You can find a local hackspace or makerspace. Or you can use one of the many services available via the Internet who can print a model for you. Just design, upload, and pay." ([https://matrix.to/#/!OGWEsuBXqiRfaqvtfm:matrix.org/$TD5kfUkVLfx9Sbx5t0Z2oCsUTvmS0FPrwQn0Xrr5YiQ?via=matrix.org&via=tchncs.de&via=envs.net source]) <br>
"The only one I know of is "https://www.pcbway.com/rapid-prototyping/injection-molding/"" ([https://matrix.to/#/!jnYVOKPfUvfPXbQIpt:matrix.org/$sJ_QPEsqeSsJ8hRjgoZhZ9QwxpnslvOuBpT7SkSffAE?via=matrix.org&via=tchncs.de&via=matrix.ravenfieldsystems.com source])


== Wireless charging ==
== Wireless charging ==

Revision as of 12:02, 13 January 2023

The PineBuds Pro

The PineBuds Pro are open firmware capable ANC wireless earbuds. Some of the notable features include their light weight, 3 Microphones, ANC (Active Noise Cancellation), ENC (Environment Noise Cancellation) and high fidelity 6mm speaker. It is a fully community-driven side-project which anyone can contribute to, allowing you to keep control of your device even though hardware is proprietary.

Short overview / Specifications

Dimensions:

  • Earbud: WIP
  • Charging case: 70 x 50 x 35mm (source)

Weight:

  • Earbud: 5g
  • Charging case: 65g

IP Rating of Earbuds: IPX4
Dynamic transducer (speaker): 6mm
Microphone: 3 – FeedForward, FeedBack, Talk
System on Chip (in each earbud): BES 2300YP

  • CPU: Dual-core 300MHz ARM Cortex-M4F
  • ROM: 448KB
  • SRAM: 992KB
  • BT shared SRAM: 64KB
  • Flash: 4MB (Endurance erase cycles: >500)

Communication:

  • Bluetooth: Bluetooth 5.2 dual-mode compliant
  • USB: USB to dual UARTs at charging case

Battery:

  • Earbud: Built-in LiPo 3.7V 40mAh
  • Charging case: Built-in LiPo 3.7V 800mAh

Port:

  • Earbud: 4 pins
  • Charging case:
    • 4 pogo pins
    • USB type-C port 5V 500mA

Software releases

Firmware Images Build

Flash back factory default firmware using Windows based utility:

SDK Release

Work in progress

Silicone case

Goal is to make a silicone case like this for PineBuds Pro.

"Design a mold, use a hobby 3D printer to manufacture it, then fill with silicone." (source)
"You can find a local hackspace or makerspace. Or you can use one of the many services available via the Internet who can print a model for you. Just design, upload, and pay." (source)
"The only one I know of is "https://www.pcbway.com/rapid-prototyping/injection-molding/"" (source)

Wireless charging

PineBuds Pro doesn't have wireless charging by default, but you can add it. However, you need to know how to disassemble the charging case and solder the component to the PCB.

Pine originally planned to have wireless charging for the PineBuds Pro, but apparently for cost reasons they decided to cancel it. However, they left footprints on the PCB for wireless charging component. They also desiged [name of component] component to be used.

SoC and Memory Specification

BES-Tech.jpg

BES2300YP Block Diagram.jpg

SoC Architecture

Cortex-M4.png
    • CMOS Single-chip Fully-integrated RF, PMU, Audio CODEC and Cortex-M4F CPU
  • Memory Features:
    • 4MB Serial Flash On-chip for Custom Program
    • Internal ROM 448KB for critical constants and code
    • Internal SRAM 992KB for critical data and code
  • BT Features:
    • Bluetooth 5.2 dual-mode compliant
  • Audio Features:
    • Support BES Intelligent Bluetooth Retransmission (IBRT)
    • Support FF/Hybrid ANC
    • Dual MICs noise reduction
    • Echo Cancellation
    • Support low power voice activity detection
    • Multi-band EQ and Bass enhancement
    • Support Active Crossover
    • Support TWS
    • HiFi Stereo Audio DAC: 120dB SNR, 110dB DNR
    • HiFi Stereo Audio ADC: 100dB SNR
    • Sample rates from 8 kHz to 384 kHz
    • Support dual/single Mic noise suppression
    • Support ambient awareness
    • Support talk through
    • 24-bit audio processing
  • PMU Features
    • 3.1V-5.5V Input for VBAT
    • Internal LPO for low power mode.
    • DCXO with internal oscillator circuit
    • Internal temperature sensor

Information, Schematics and Certifications

Datasheets for Components and Peripherals