Difference between revisions of "User:Pineadmin/OpenMediaVault"

From PINE64
Jump to navigation Jump to search
Line 35: Line 35:


<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional<span style="color:#FF0000">(Not fully tested)</span>.
You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional


1. Complete the "[[#Basic_Setup|Basic Setup]]" above
1. Complete the "[[#Basic_Setup|Basic Setup]]" above
Line 44: Line 44:
3. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[HOST]::[Module])
3. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[HOST]::[Module])
     - for testing: select Job -> Run
     - for testing: select Job -> Run
     - for bidirectional Rsync<span style="color:#FF0000">(Not fully tested)</span>: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)
     - for bidirectional Rsync: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)


4. Diagnostics -> System Logs
4. Diagnostics -> System Logs
Line 53: Line 53:


<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional<span style="color:#FF0000">(Not fully tested)</span>.
You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional


1. Complete the "[[#Basic_Setup|Basic Setup]]" above
1. Complete the "[[#Basic_Setup|Basic Setup]]" above
Line 107: Line 107:
10. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[<<<CNAME>>>.ddns.net]::[Module])
10. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[<<<CNAME>>>.ddns.net]::[Module])
     - for testing: select Job -> Run
     - for testing: select Job -> Run
     - for bidirectional Rsync<span style="color:#FF0000">(Not fully tested)</span>: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)
     - for bidirectional Rsync: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)


11. Diagnostics -> System Logs
11. Diagnostics -> System Logs
</pre>
</pre>

Revision as of 07:35, 30 November 2017

If you are dealing with confidential files transfer/sharing, please make sure your setup is secured with long and hard to guess random password or PKI keys. Make sure you use DUMMY folders/files for testing first to get yourself familiar and comfortable with the settings.


Basic Setup

1. If no output on HDMI, you need to find the IP Address with tools (e.g. netscan) (hostname: PINE64, PINE64SO)

2. Use the IP Address on PC browser to login to the Web Admin Pages: admin / openmediavault  (Remember to change the default password: System -> General Settings -> Web Administrator Password)

3. Plug USB Drive

4. Go to Storage -> Physical Disks -> Scan

5. Go to Storage -> File Systems -> select the Partition to mount -> Mount -> Apply

6. Access Right Management -> User -> Add

7. Access Right Management -> Shared Folders -> Add
    - select newly added Shared Folder -> Privileges -> tick Read/Write -> Save


FTP

1. Complete the "Basic Setup" above

2. Services -> FTP -> Settings -> Enable -> Save -> Apply
                   -> Shares -> Add -> Apply


Rsync Clone/Backup

You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional

1. Complete the "Basic Setup" above

2. [On slave/destination device] Services -> Rsync -> Server -> Settings -> Enable -> Save -> Apply
	                                                     -> Modules -> Add -> General then User -> Add

3. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[HOST]::[Module])
    - for testing: select Job -> Run
    - for bidirectional Rsync: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)

4. Diagnostics -> System Logs


Rsync Clone/Backup (Through Internet)

You required 2 devices (e.g. 2 ROCK64, PINE64, SOPINE or etc) to Clone/Backup from master to slave or bidirectional

1. Complete the "Basic Setup" above

[IF YOU KNOW HOW TO SETUP DYNAMIC DNS ON YOUR INTERNET MODEM/ROUTER PLEASE SKIP TO #8]

2. Services -> SSH -> Permit root login (enable)  (Remember to always disable it back for security reason)

3. SSH to the device with Putty: root / openmediavault  (Remember to change the default password)

4. # apt-get install ddclient  (no-ip.com example)

Dynamic DNS service provider: other
Dynamic DNS server: dynupdate.no-ip.com
Dynamic DNS update protocol: dyndns2
Username for dynamic DNS service: <<<USERNAME/EMAIL>>>
Password for dynamic DNS service: <<<PASSWORD>>>
Re-enter password to verify: <<<PASSWORD>>>
Network interface used for dynamic DNS service: web
DynDNS fully qualified domain names: <<<CNAME>>>.ddns.net
Run ddclient on PPP connect? No
Run ddclient as daemon? Yes
Interval between ddclient runs: 300

# dpkg-reconfigure ddclient  (To Re-run configuration wizard above)

5. # vi /etc/ddclient.conf

Change: use=if, if=web
To:     use=web, web=checkip.dyndns.com, web-skip='Current IP Address'

##########
protocol=dyndns2
use=web, web=checkip.dyndns.com, web-skip='Current IP Address'
server=dynupdate.no-ip.com
login=<<<USERNAME/EMAIL>>>
password='<<<PASSWORD>>>'
<<<CNAME>>>.ddns.net
##########

6. # systemctl restart ddclient  (Restart ddclient after changed in configuration)

7. Diagnostics:

# ddclient -daemon=0 -debug -verbose -noquiet
# systemctl status ddclient

8. On your internet modem/router: Port Forward to the slave/destination device with port 873.

9. [On slave/destination device] Services -> Rsync -> Server -> Settings -> Enable -> Save -> Apply
	                                                     -> Modules -> Add -> General then User -> Add

10. Services -> Rsync -> Jobs -> Add (Type: Remote, Mode: Push, Destination server: [USER]@[<<<CNAME>>>.ddns.net]::[Module])
    - for testing: select Job -> Run
    - for bidirectional Rsync: Add another Job to Pull from slave/destination device (Don't enable Delete because new file/folder will be deleted)

11. Diagnostics -> System Logs