Difference between revisions of "NASCase"
Jump to navigation
Jump to search
| Line 91: | Line 91: | ||
[[File:FrontIO.png|300px|thumb|left|Front IO with IR and LED relay installed]] | [[File:FrontIO.png|300px|thumb|left|Front IO with IR and LED relay installed]] | ||
Make sure nothing is plugged into your ROCKPro64 - including a micro SD card. | Make sure nothing is plugged into your ROCKPro64 - including a micro SD card. | ||
If you intend to use a heatsink with your board then please install it now before proceeding. | If you intend to use a heatsink with your board then please install it now before proceeding. If you bought the heatsink from the Pine64 store it comes with thermal paste and a thermal pad. You can use one or the other (not both!). The thermal pad is easier to apply but the thermal paste should be better at cooling if properly applied. | ||
Place your ROCKPro64 into the case with USB 2.0 and 3.0/C ports facing the front of the case. It should fit snugly and align with the port cut-outs in the case. Do not attempt at installing the board at an angle; insert it while holding it level and lowering it into the case. | Place your ROCKPro64 into the case with USB 2.0 and 3.0/C ports facing the front of the case. It should fit snugly and align with the port cut-outs in the case. Do not attempt at installing the board at an angle; insert it while holding it level and lowering it into the case. | ||