Difference between revisions of "NASCase"
Jump to navigation
Jump to search
| Line 78: | Line 78: | ||
===Step 2. Installing the ROCKPro64 into the NAS Case=== | ===Step 2. Installing the ROCKPro64 into the NAS Case=== | ||
[[File:ROCKPro64inNASCase.jpg|400px|thumb|right]] | |||
Make sure nothing is plugged into your ROCKPro64 - including a micro SD card. | Make sure nothing is plugged into your ROCKPro64 - including a micro SD card. | ||
If you intend to use a heatsink with your board then please install it now before proceeding. | If you intend to use a heatsink with your board then please install it now before proceeding. | ||
| Line 87: | Line 88: | ||
In the see-through bag you will also find a small semi-opaque plastic cylinder. This is the LED light lead and it should be installed from the outside of the case into the hole right over the reset (RST) switch. Simply press it into the hole until it sits tight. | In the see-through bag you will also find a small semi-opaque plastic cylinder. This is the LED light lead and it should be installed from the outside of the case into the hole right over the reset (RST) switch. Simply press it into the hole until it sits tight. | ||
If you wish to install an IRx received into your case then you should also place it into the IR socket at this stage. It should align with the cutout right above the power (PWR) switch. | If you wish to install an IRx received into your case then you should also place it into the IR socket at this stage. It should align with the cutout right above the power (PWR) switch. | ||
===Step 3 PCIe to SATA adapter and Cabling=== | ===Step 3 PCIe to SATA adapter and Cabling=== | ||