Difference between revisions of "File:UART-pinecil-breakout-board-testing30.png"
Jump to navigation
Jump to search
(River uploaded a new version of File:UART-pinecil-breakout-board-testing30.png) |
|||
| Line 1: | Line 1: | ||
== Summary == | == Summary == | ||
Pinecil Break-out board for debugging and dev. | Pinecil Break-out board for debugging and dev. (these directions are for the V2 model of Pinecil). | ||
* attach to any UART | * attach wires from the Break-out board to any UART TTL converter (siPeed in this photo). | ||
* reverse the RX and TX when connecting so that Rx --> TX and TX --> RX between the | * reverse the RX and TX when connecting so that Rx --> TX and TX --> RX between the Breakout board and the UART adapter. | ||
* example here | * connect a USB-C cable from the SiPeed adapter to a PC/laptop. | ||
* Github repo for [https://github.com/sipeed/RV-Debugger-BL702 | * Open Device manager or simlilar to check which COM port the Pinecil V2 connected to. | ||
* Open an app like Putty, select Serial type, set baud speed to 2000000, and enter the same COM number retrieved from Device Manager. | |||
* example here is the Sipeed RV-debugger-plus JTAG+UART BL702, which has full-featured open source support for secondary development | |||
* Not needed for UART testing, the Github repo for [https://github.com/sipeed/RV-Debugger-BL702 SiPeed device is here] to see other functions for it. | |||
[[Category: Pinecil]] | [[Category: Pinecil]] | ||
Revision as of 21:47, 10 April 2023
Summary
Pinecil Break-out board for debugging and dev. (these directions are for the V2 model of Pinecil).
- attach wires from the Break-out board to any UART TTL converter (siPeed in this photo).
- reverse the RX and TX when connecting so that Rx --> TX and TX --> RX between the Breakout board and the UART adapter.
- connect a USB-C cable from the SiPeed adapter to a PC/laptop.
- Open Device manager or simlilar to check which COM port the Pinecil V2 connected to.
- Open an app like Putty, select Serial type, set baud speed to 2000000, and enter the same COM number retrieved from Device Manager.
- example here is the Sipeed RV-debugger-plus JTAG+UART BL702, which has full-featured open source support for secondary development
- Not needed for UART testing, the Github repo for SiPeed device is here to see other functions for it.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 21:37, 10 April 2023 |  | 1,306 × 777 (1.6 MB) | River (talk | contribs) | includ Baud speed |
| 01:54, 7 April 2023 |  | 1,306 × 777 (1.63 MB) | River (talk | contribs) | ||
| 01:11, 7 April 2023 |  | 1,306 × 777 (1.64 MB) | River (talk | contribs) | Pinecil Break-out board for debugging and dev. - attach to any UART ttl converter. - example here with Sipeed RV-debugger-plus JTAG+UART BL702, a full-featured open source support for secondary development - Github repo for [SiPeed device](https://github.com/sipeed/RV-Debugger-BL702) Category: Pinecil |
You cannot overwrite this file.
File usage
The following page uses this file:
