File:Quartz64 Model A VBAT Connector Pinout.png

From PINE64
Revision as of 16:06, 8 February 2023 by CounterPillow (talk | contribs) (Drawing showing the pinout of the +VBAT- connector on the Quartz64 Model A. VCC is positive TEMP is the temperature sensor GND is the ground The connector is JST PH-3 compatible.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Quartz64_Model_A_VBAT_Connector_Pinout.png(169 × 222 pixels, file size: 4 KB, MIME type: image/png)

Summary

Drawing showing the pinout of the +VBAT- connector on the Quartz64 Model A.

VCC is positive TEMP is the temperature sensor GND is the ground

The connector is JST PH-3 compatible.

Licensing

CC some rights reserved.svg
Cc-by new white.svg
This file is licensed under the Creative Commons Attribution 4.0 Unported license.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current16:06, 8 February 2023Thumbnail for version as of 16:06, 8 February 2023169 × 222 (4 KB)CounterPillow (talk | contribs)Drawing showing the pinout of the +VBAT- connector on the Quartz64 Model A. VCC is positive TEMP is the temperature sensor GND is the ground The connector is JST PH-3 compatible.

The following page uses this file: