Peripheral On Top (POT)
USB/UART Programming Adapter (PMPROG01)
Feature
Base on Silicon Libs CP2102
Support Virtual COM Port Device Drivers
Support USBXpress™ Direct Driver Support
With XH 5 pin 2.54mm pitch connector for UART connection
Voltage Output on the connection is selectable to either 5V,3.3V or off
On board USB-B Connector Receptor
Connector J3 can direct insert into Pine A64 Exp-Bus
I/O pin are protected with ESD protector IC.
Related Specification and Document
[CP2102 Datasheet]
[Virtual COM Port Driver]
[USBXpress Driver]
Veroboard POT (PMVRB01)
Feature
Sit on top of Pine A64 board
All the header receptor will have extended length pin to allow other POT board to insert on top of it
Allow easy access to all the I/O pin on the Pine A64 header
On board 4pcs of LED with current limiting resistor all direct connect to I/O pin for status indicator
On board 4pcs of Tact switch
On board XH5 2.54mm pitch connector for UART0 allow easy connection to USB/UART adapter for console access
Multi I2C Bus POT (PMI2C01)
Feature
Sit on top of Pine A64 board
All the header receptor will have extended length pin to allow other POT board to insert on top of it
Allow easy access to all the I/O pin on the Pine A64 header
2 channel of I2C bus is wire out for easy access
I2C bus repeater IC (PCA9517A) are included in each I2C bus to allow connection of more devices on each bus
Support 3.3V and 5V I2C bus for each channel separately
On Board separated 3.3V supply regulator for 3.3V I2C Bus
Each I2C bus pin are protected with ESD protector devices
Each channel consist of 4 pcs of XH 4 pin 2.54 mm pitch connector and 2 pcs of XH 5 pin 2.54 mm pitch connector
For the XH 4 pin connector, will consist of GND,SCL,SDA,5V pin
For the XH 5 pin connector, will consist of GND,nINT,SCL,SDA,5V pin
5V supplier is direct connect from Pine A64 adapter's supply thus prevent over loading Pine A64 board
The nINT pin will allow peripheral with interrupt pin link back to the Pine A64 I/O pin
Related Specification and Document
NXP PCA9517A Datasheet
NXP AN10658 Sending I2C-bus signal via long communication cables
NXP AN11075 Driving I2C-bus signals over twisted pair cables with PCA9605
I2C Device : Humidity and Temperature Sensor (PMSDP01)
Feature
Base on Silicon Labs Si7021 I2C Humidity and Temperature Sensor
High Accuracy Temperature Sensor ±0.4 °C (max), –10 to 85 °C
0 to 100% RH operating range
Up to –40 to +125 °C operating range
On board 3.3V regulator
2pcs of XH 4pin 2.54 mm pitch connector to allow daisy chain of multiple I2C sensor
Related Specification and Document
Si7021-A20 Datasheet
ZWave Module (PMZW01)
Base on Mitsumi WML-C85C ZWave Chipset
On board PCB antenna or U-FL connector for external antenna
Related Specification and Document
