PinePhone Pro/Create a multi-distribution image using rk2aw
Jump to navigation
Jump to search
This article explains how to create a multi-distribution image on the PinePhone Pro using rk2aw.
Multi-distro on microSD Card
This article explains how to install megi's rk2aw loader, U-Boot to SPI and a multi-distribution image to the microSD card and/or eMMC of the PinePhone Pro. Further instructions regarding rk2aw can be found on megi's website under https://xff.cz/kernels/rk2aw/rk2aw-rk3399-pinephone-pro/INSTALL. Please note that loader and userspace utility to flash it are free, but not open-source.
Flash rk2Aw loader to SPI
Connect PinePhone Pro to a Linux machine, start a ssh connection and download installer to flash pre-loader to the phone's SPI.
ssh <user>@<phoneip> cd ~/Downloads curl -O https://xff.cz/kernels/bootloaders/ppp.tar.gz tar -xvzf ppp.tar.gz -C ~/Downloads # scp -r ~/Downloads/ppp <user>@<phoneip>:~/Downloads # copy to phone, non needed sudo ./spinor-flash-initial-setup.sh
Build multi-distro on the microSD card
If necessary wipe the microSD card
sudo dd if=/dev/zero of=/dev/sdb count=1 bs=32768 status=progress # quick way i.e. # 32GB SDcard (30989615104bytes/32768dim=1volta) sudo dd if=/dev/zero of=/dev/sdb count=945728 bs=32768 status=progress # slow way i.e. # 32GB SDcard (30989615104bytes/32768dim=945728volte) sudo dd if=/dev/zero of=/dev/sdb count=15271040 bs=4096 status=progress # 63GB SDcard (62550179840bytes/512dim=122168320volte)
Partition the microSD card
Note: A minimum capacity of 64 GB for the microSD card is recommended for 5 distributions.
sudo sfdisk /dev/sdb --wipe always <<EOF label: gpt first-lba: 64 table-length: 8 start=64, size=32704, type=D7B1F817-AA75-2F4F-830D-84818A145370, name="loader", attrs=RequiredPartition size=11G, name="ALARM", attrs="RequiredPartition,LegacyBIOSBootable" size=11G, name="MANJARO", attrs="RequiredPartition,LegacyBIOSBootable" size=11G, name="MOBIAN", attrs="RequiredPartition,LegacyBIOSBootable" size=11G, name="PMOS", attrs="RequiredPartition,LegacyBIOSBootable" size=11G, name="UT", attrs="RequiredPartition,LegacyBIOSBootable" size=+, name="extra", attrs="RequiredPartition,LegacyBIOSBootable" EOF
Checking that no-one is using this disk right now ... OK Disk /dev/sdb: 58.25 GiB, 62550179840 bytes, 122168320 sectors Disk model: SD Card Reader Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: C44BE2FC-34D6-4DD8-99FC-7FFB75602A79 Old situation: >>> Script header accepted. >>> Created a new GPT disklabel (GUID: F71BFBA6-D2C3-4C20-8079-1401B10C724C). The maximal number of partitions is 8 (default is 128). /dev/sdb1: Created a new partition 1 of type 'unknown' and of size 16 MiB. /dev/sdb2: Created a new partition 2 of type 'Linux filesystem' and of size 11 GiB. /dev/sdb3: Created a new partition 3 of type 'Linux filesystem' and of size 11 GiB. /dev/sdb4: Created a new partition 4 of type 'Linux filesystem' and of size 11 GiB. /dev/sdb5: Created a new partition 5 of type 'Linux filesystem' and of size 11 GiB. /dev/sdb6: Created a new partition 6 of type 'Linux filesystem' and of size 11 GiB. /dev/sdb7: Created a new partition 7 of type 'Linux filesystem' and of size 3.2 GiB. /dev/sdb8: Done. New situation: Disklabel type: gpt Disk identifier: F71BFBA6-D2C3-4C20-8079-1401B10C724C Device Start End Sectors Size Type /dev/sdb1 64 32767 32704 16M unknown /dev/sdb2 32768 23101439 23068672 11G Linux filesystem /dev/sdb3 23101440 46170111 23068672 11G Linux filesystem /dev/sdb4 46170112 69238783 23068672 11G Linux filesystem /dev/sdb5 69238784 92307455 23068672 11G Linux filesystem /dev/sdb6 92307456 115376127 23068672 11G Linux filesystem /dev/sdb7 115376128 122167295 6791168 3.2G Linux filesystem The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks.
Get image files of the distributions
Get the compressed distribution images from PinePhone Pro Software Releases, decompress them and mount both partitions "/boot", "/root" from each distro.
Change the directory to the Downloads folder.
cd ~/Downloads
Get images. Example releases (update the syntax to newer releases).
wget https://github.com/dreemurrs-embedded/Pine64-Arch/releases/download/20230203/archlinux-pinephone-pro-phosh-20230925.img.xz wget https://github.com/manjaro-pinephone/phosh/releases/download/beta35/Manjaro-ARM-phosh-pinephonepro-beta35.img.xz wget https://images.mobian.org/pinephonepro/weekly/mobian-pinephonepro-phosh-20231008.img.xz wget https://images.postmarketos.org/bpo/v23.06/pine64-pinephonepro/phosh/20230904-0846/20230904-0846-postmarketOS-v23.06-phosh-22.2-pine64-pinephonepro.img.xz wget https://ci.ubports.com/job/focal-hybris-rootfs-arm64/job/master/lastSuccessfulBuild/artifact/ubuntu-touch-pinephone-pro-img-arm64.raw.xz
Extract the compressed files:
xz -v -d -k archlinux-pinephone-pro-phosh-20230925.img.xz xz -v -d -k Manjaro-ARM-phosh-pinephonepro-beta35.img.xz xz -v -d -k mobian-pinephonepro-phosh-20231008.img.xz xz -v -d -k 20230904-0846-postmarketOS-v23.06-phosh-22.2-pine64-pinephonepro.img.xz xz -v -d -k ubuntu-touch-pinephone-pro-img-arm64.raw.xz
For PostMarketOS you can also use bootstrap to generate distro image. Make sure you install pmbootstrap before building images
git clone --depth=1 https://git.sr.ht/~postmarketos/pmbootstrap mkdir -p ~/.local/bin ln -s "$PWD/pmbootstrap/pmbootstrap.py" ~/.local/bin/pmbootstrap source ~/.profile # remember to update your environment pmbootstrap --version # If this returns error, put ~/.local/bin in your PATH, adding the following to your ~/.profile (zsh: ~/.zprofile). # PATH="$HOME/.local/bin:$PATH" # optional
Create 2GB empty image file, format and mount it.
sudo dd if=/dev/zero of=postmarketOS-edge.img bs=1 count=0 seek=2G status=progress && sync sudo mkfs.ext4 postmarketOS-edge.img sudo su losetup -P /dev/loop0 postmarketOS-edge.img exit
Build PMOS image via pmbootstrap
pmbootstrap init # follow all the setup directions pmbootstrap status pmbootstrap pull pmbootstrap install --sdcard=/dev/loop0 pmbootstrap shutdown # remember to deactivare chroot after the image creation
Build Arch Linux partition
Login as root, mount the image, copy rootfs and bootfs to the partition. You need also to make some changes on some files.
sudo su # login with your psw losetup -P /dev/loop1 archlinux-pinephone-pro-phosh-20230925.img mkdir /mnt/archlinux /mnt/archlinux/boot /mnt/archlinux/root /mnt/archlinuxsd mount /dev/loop1p1 /mnt/archlinux/boot/ && mount /dev/loop1p2 /mnt/archlinux/root/ exit
sudo dd if=/dev/loop1p2 of=/dev/sdb2 bs=1M status=progress conv=fsync sudo mount /dev/sdb2 /mnt/archlinuxsd/ sudo scp -r /mnt/archlinux/boot/* /mnt/archlinuxsd/boot sudo mv /mnt/archlinuxsd/boot/boot.scr /mnt/archlinuxsd/boot/boot.scrORIG sudo mkdir /mnt/archlinuxsd/boot/extlinux sudo su
cat << EOF > /mnt/archlinuxsd/boot/extlinux/extlinux.conf #/boot/extlinux/extlinux.conf MENU TITLE Pinephone Pro Boot Menu LABEL l0 MENU LABEL ALARM FDT /boot/dtbs/rockchip/rk3399-pinephone-pro.dtb KERNEL /boot/Image.gz INITRD /boot/initramfs-linux.img APPEND root=PARTLABEL=ALARM console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait EOF
cat << EOF > /mnt/archlinuxsd/etc/fstab # <file system> <dir> <type> <options> <dump> <pass> PARTLABEL=ALARM / ext4 rw,relatime 0 1 EOF
exit
Build Manjaro partition
Login as root, mount the image, copy rootfs and bootfs to the partition. You need also to make some changes on some files.
sudo su # login with your psw losetup -P /dev/loop2 Manjaro-ARM-phosh-pinephonepro-beta35.img mkdir /mnt/manjaro /mnt/manjaro/boot /mnt/manjaro/root /mnt/manjarosd mount /dev/loop2p1 /mnt/manjaro/boot/ && mount /dev/loop2p2 /mnt/manjaro/root/ exit
sudo dd if=/dev/loop2p2 of=/dev/sdb3 bs=1M status=progress conv=fsync sudo mount /dev/sdb3 /mnt/manjarosd/ sudo scp -r /mnt/manjaro/boot/* /mnt/manjarosd/boot sudo mv /mnt/manjarosd/boot/boot.scr /mnt/manjarosd/boot/boot.scrORIG sudo mkdir /mnt/manjarosd/boot/extlinux sudo su
cat << EOF > /mnt/manjarosd/boot/extlinux/extlinux.conf #/boot/extlinux/extlinux.conf MENU TITLE Pinephone Pro Boot Menu LABEL l0 MENU LABEL MANJARO FDT /boot/dtbs/rockchip/rk3399-pinephone-pro.dtb KERNEL /boot/Image INITRD /boot/initramfs-linux.img APPEND root=PARTLABEL=MANJARO console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait EOF
cat << EOF > /mnt/manjarosd/etc/fstab # <file system> <dir> <type> <options> <dump> <pass> PARTLABEL=MANJARO / ext4 defaults 0 1 EOF
exit
Build Mobian partition
Login as root, mount the image, copy rootfs and bootfs to the partition. You need also to make some changes on some files.
sudo su # login with your psw losetup -P /dev/loop3 mobian-pinephonepro-phosh-20231008.img mkdir /mnt/mobian /mnt/mobian/boot /mnt/mobian/root /mnt/mobiansd mount /dev/loop3p1 /mnt/mobian/boot/ && mount /dev/loop3p2 /mnt/mobian/root/ exit
sudo dd if=/dev/loop3p2 of=/dev/sdb4 bs=1M status=progress conv=fsync sudo mount /dev/sdb4 /mnt/mobiansd/ sudo scp -r /mnt/mobian/boot/* /mnt/mobiansd/boot sudo su
cat << EOF > /mnt/mobiansd/etc/fstab # <file system> <dir> <type> <options> <dump> <pass> PARTLABEL=MOBIAN / ext4 defaults,x-systemd.growfs 0 1 EOF
exit
sudo nano /mnt/mobiansd/boot/extlinux/extlinux.conf >adjust ## /boot/extlinux/extlinux.conf file >MENU LABEL MOBIAN >linux /boot/vmlinuz-6.1-rockchip >initrd /boot/initrd.img-6.1-rockchip >fdtdir /boot/dtb-6.1-rockchip/ >APPEND root=PARTLABEL=MOBIAN console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait
Build PostmarketOS partition
Login as root, mount the image, copy rootfs and bootfs to the partition. You need also to make some changes on some files.
sudo su # login with your psw losetup -P /dev/loop4 postmarketOS-edge.img mkdir /mnt/postmarketos /mnt/postmarketos/boot /mnt/postmarketos/root /mnt/postmarketossd mount /dev/loop4p1 /mnt/postmarketos/boot/ && mount /dev/loop4p2 /mnt/postmarketos/root/ exit
sudo dd if=/dev/loop4p2 of=/dev/sdb5 bs=1M status=progress conv=fsync sudo mount /dev/sdb5 /mnt/postmarketossd/ sudo scp -r /mnt/postmarketos/boot/* /mnt/postmarketossd/boot sudo mkdir /mnt/postmarketossd/boot/extlinux sudo su
cat << EOF > /mnt/postmarketossd/boot/extlinux/extlinux.conf #/boot/extlinux/extlinux.conf default l0 menu title U-Boot menu prompt 0 timeout 10 label l0 menu label PMOS linux /boot/vmlinuz initrd /boot/initramfs-extra fdtdir /boot/dtbs-pine64-pinephonepro/ APPEND root=PARTLABEL=PMOS console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait EOF
cat << EOF > /mnt/postmarketossd/etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> PARTLABEL=PMOS / ext4 defaults 0 0 EOF
exit
Build Ubuntu Touch partition
Login as root, mount the image, copy rootfs and bootfs to the partition. You need also to make some changes on some files.
sudo su # login with your psw losetup -P /dev/loop5 ubuntu-touch-pinephone-pro-img-arm64.raw mkdir /mnt/ubuntutouch /mnt/ubuntutouch/boot /mnt/ubuntutouch/root /mnt/ubuntutouchsd mount /dev/loop5p2 /mnt/ubuntutouch/boot/ && mount /dev/loop5p3 /mnt/ubuntutouch/root/ exit
sudo dd if=/dev/loop5p3 of=/dev/sdb6 bs=1M status=progress conv=fsync sudo mount /dev/sdb6 /mnt/ubuntutouchsd/ sudo scp -r /mnt/ubuntutouch/boot/* /mnt/ubuntutouchsd/boot sudo su
cat << EOF > /mnt/ubuntutouchsd/etc/fstab # <file system> <dir> <type> <options> <dump> <pass> PARTLABEL=UT / ext4 defaults 0 1 EOF
cat << EOF > /mnt/ubuntutouchsd/boot/extlinux/extlinux.conf
#/boot/extlinux/extlinux.conf
default l0
menu title U-Boot menu
prompt 0
timeout 50
label l0
menu label UT
linux /boot/vmlinuz-6.5.0-okpine-ut
initrd /boot/initrd.img-6.5.0-okpine-ut
fdtdir /boot/dtb-6.5.0-okpine-ut/
APPEND root=PARTLABEL=UT console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait
EOF
exit
Unmount and detach all images
sudo umount /mnt/*/* sudo umount /media/*/* sudo rm -r /mnt/* sudo rm -r /media/*/* sudo su losetup -D exit
Switching On Device
According to rk2aw info, to operate your PinePhonePro you can:
Plug in USB power button. Led blinks: 0.5s on, 0.5s off. Battery is charging.
Press shortly power button. Graphical menu appears, than just press onto the image to boot from.
Press power button longer. Led starts to blinks rapidly, release power button and led blinks N times each second according to the flashed images. In example: Led blinks once each second and 1st image is selected Led blinks twice each second and 2nd image is seleted Led blinks triple each second and 3rd image is selected Press shortly to move to next image. Press longer to boot the selected image.
In case you hold the power button too long, the device is forced to power off.
Multi-distro on eMMC
Make sure you boot from the microSD card in your PinePhone Pro as we are going to overwrite the eMMC. Note that below, Arch is booted from the microSD card and the microSD card is listed as the device /dev/mmcblk1.
Flash rk2Aw loader to SPI
Same as above. Note this installs rk2aw and a bootloader to SPI NOR flash. Resulting SPI status is as follow:
# ./rk2aw-spi-flasher Machine: Pine64 PinePhonePro (pine64,pinephone-pro) SPI NOR Flash: - Total size: 16384 KiB - Erase block size: 4 KiB - Write size: 1 - Manufacturer: gigadevice - Part name: gd25lq128e - JEDEC ID: 257018
Bootable images currently present in SPI NOR flash: Idx Header Off 1 Size 1 Off 2 Size 2 Notes/content ------------------------------------------------------------------------------- 0 0 2048 6144 0 0 (padded) 0='rk2aw' 5 131072 133120 67584 200704 124928 0='U-Boot TPL' 1='U-Boot SPL' 7 524288 526336 147456 673792 124928 0='ddrbin' 1='U-Boot SPL'
Auto-calculated layout for rk2aw dual bootloader scheme: Area Offset Size --------------------------------------------------- rk2aw primary 0 65536 rk2aw backup 65536 65536 spl fallback 131072 393216 spl primary 524288 389120 itb fallback 913408 2097152 itb primary 3010560 2097152
Build multi-distro eMMC
In this example we are going to build 2 partitions on the eMMC, the first with Arch/Phosh and the second with Arch/sxmo. We have already downloaded the images from Danct12 and decompressed them.
Mount the images
cd ~/Downloads # enter to directory sudo su # login with your psw losetup -P /dev/loop0 archlinux-pinephone-pro-phosh-20230203.img losetup -P /dev/loop1 archlinux-pinephone-pro-sxmo-20230203.img ls -l /mnt/ mkdir /mnt/phosh mkdir /mnt/sxmo mkdir /mnt/phosh/boot mkdir /mnt/phosh/root mkdir /mnt/sxmo/boot mkdir /mnt/sxmo/root mkdir /mnt/ephosh # e for the partition on the eMMC mkdir /mnt/esxmo # e for the partition on the eMMC mount /dev/loop0p1 /mnt/phosh/boot/ mount /dev/loop0p2 /mnt/phosh/root/ mount /dev/loop1p1 /mnt/sxmo/boot/ mount /dev/loop1p2 /mnt/sxmo/root/
lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 5G 0 loop ├─loop0p1 259:0 0 122M 0 part /mnt/phosh/boot └─loop0p2 259:1 0 4.9G 0 part /mnt/phosh/root loop1 7:1 0 3.5G 0 loop ├─loop1p1 259:2 0 122M 0 part /mnt/sxmo/boot └─loop1p2 259:3 0 3.4G 0 part /mnt/sxmo/root mmcblk2 179:0 0 115.2G 0 disk ├─mmcblk2p1 179:1 0 122M 0 part └─mmcblk2p2 179:2 0 115.1G 0 part mmcblk2boot0 179:32 0 4M 1 disk mmcblk2boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 59.6G 0 disk ├─mmcblk1p1 179:97 0 122M 0 part /boot └─mmcblk1p2 179:98 0 59.5G 0 part / zram0 254:0 0 1.5G 0 disk [SWAP]
Prepare eMMC
dd if=/dev/zero of=/dev/mmcblk2 count=32768 bs=32768 status=progress # overwrite the front to clear any bootloaders
sfdisk /dev/mmcblk2 << EOF label: gpt first-lba: 64 table-length: 8 size=32G, name="PHOSH", attrs="RequiredPartition,LegacyBIOSBootable" size=+, name="SXMO", attrs="RequiredPartition,LegacyBIOSBootable" EOF
Checking that no-one is using this disk right now ... OK Disk /dev/mmcblk2: 115.23 GiB, 123731968000 bytes, 241664000 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes >>> Script header accepted. >>> Created a new GPT disklabel (GUID: 7EB4B1E0-5F49-4F30-9F1E-E9E1F305D461). The maximal number of partitions is 8 (default is 128). /dev/mmcblk2p1: Created a new partition 1 of type 'Linux filesystem' and of size 32 GiB. /dev/mmcblk2p2: Created a new partition 2 of type 'Linux filesystem' and of size 83.2 GiB. /dev/mmcblk2p3: Done.
New situation: Disklabel type: gpt Disk identifier: 7EB4B1E0-5F49-4F30-9F1E-E9E1F305D461 Device Start End Sectors Size Type /dev/mmcblk2p1 2048 67110911 67108864 32G Linux filesystem /dev/mmcblk2p2 67110912 241661951 174551040 83.2G Linux filesystem The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks.
lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 5G 0 loop ├─loop0p1 259:0 0 122M 0 part /mnt/phosh/boot └─loop0p2 259:1 0 4.9G 0 part /mnt/phosh/root loop1 7:1 0 3.5G 0 loop ├─loop1p1 259:2 0 122M 0 part /mnt/sxmo/boot └─loop1p2 259:3 0 3.4G 0 part /mnt/sxmo/root mmcblk2 179:0 0 115.2G 0 disk ├─mmcblk2p1 179:1 0 32G 0 part └─mmcblk2p2 179:2 0 83.2G 0 part mmcblk2boot0 179:32 0 4M 1 disk mmcblk2boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 59.6G 0 disk ├─mmcblk1p1 179:97 0 122M 0 part /boot └─mmcblk1p2 179:98 0 59.5G 0 part / zram0 254:0 0 1.5G 0 disk [SWAP]
Build Phosh partition
dd if=/dev/loop0p2 of=/dev/mmcblk2p1 bs=1M status=progress conv=fsync mount /dev/mmcblk2p1 /mnt/ephosh/ scp -r /mnt/phosh/boot/* /mnt/ephosh/boot mv /mnt/ephosh/boot/boot.scr /mnt/ephosh/boot/boot.scrORIG cat << EOF > /mnt/ephosh/etc/fstab #/boot/extlinux/extlinux.conf #Static information about the filesystems. #See fstab(5) for details. #<file system> <dir> <type> <options> <dump> <pass> PARTLABEL=PHOSH / ext4 rw,relatime 0 1 # UUID=52CA-6165 /boot vf rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 2 mkdir /mnt/ephosh/boot/extlinux cat << EOF > /mnt/ephosh/boot/extlinux/extlinux.conf #/boot/extlinux/extlinux.conf MENU TITLE Pinephone Pro Boot Menu LABEL l0 MENU LABEL phosh FDT /boot/dtbs/rockchip/rk3399-pinephone-pro.dtb KERNEL /boot/Image INITRD /boot/initramfs-linux.img APPEND root=PARTLABEL=PHOSH console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait EOF
Build SXMO partition
We have unmounted all the Phosh devices, so
lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 5G 0 loop ├─loop0p1 259:0 0 122M 0 part └─loop0p2 259:1 0 4.9G 0 part loop1 7:1 0 3.5G 0 loop ├─loop1p1 259:2 0 122M 0 part /mnt/sxmo/boot └─loop1p2 259:3 0 3.4G 0 part /mnt/sxmo/root mmcblk2 179:0 0 115.2G 0 disk ├─mmcblk2p1 179:1 0 32G 0 part └─mmcblk2p2 179:2 0 83.2G 0 part mmcblk2boot0 179:32 0 4M 1 disk mmcblk2boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 59.6G 0 disk ├─mmcblk1p1 179:97 0 122M 0 part /boot └─mmcblk1p2 179:98 0 59.5G 0 part / zram0 254:0 0 1.5G 0 disk [SWAP] dd if=/dev/loop1p2 of=/dev/mmcblk2p2 bs=1M status=progress conv=fsync mount /dev/mmcblk2p2 /mnt/esxmo/ scp -r /mnt/sxmo/boot/* /mnt/esxmo/boot mv /mnt/esxmo/boot/boot.scr /mnt/esxmo/boot/boot.scrORIG cat << EOF > /mnt/esxmo/etc/fstab # Static information about the filesystems. # See fstab(5) for details. # <file system> <dir> <type> <options> <dump> <pass> PARTLABEL=SXMO / ext4 rw,relatime 0 1 # UUID=841C-F9DD /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 2 EOF mkdir /mnt/esxmo/boot/extlinux cat << EOF > /mnt/esxmo/boot/extlinux/extlinux.conf #/boot/extlinux/extlinux.conf MENU TITLE Pinephone Pro Boot Menu LABEL l0 MENU LABEL sxmo FDT /boot/dtbs/rockchip/rk3399-pinephone-pro.dtb KERNEL /boot/Image INITRD /boot/initramfs-linux.img APPEND root=PARTLABEL=SXMO console=ttyS2,115200 console=tty0 loglevel=4 rw rootwait EOF
Follow-up comments
- On first boot neither Phosh nor sxmo resized their partition - sudo resize2fs sorted that.
- Any time an update rebuilds the initramfs it is necessary to delete /boot/boot.scr again to keep the rk2aw menu clean.
- In case you want to reinstall just a single distribution, the easy way is to delete an recreate partition using gParted GUI.