Wifi Remote I2c

From PINE64
Revision as of 04:33, 14 May 2016 by Pineadmin (talk | contribs)
Jump to navigation Jump to search

Quick Start Guide

Hardware Setup

Hardware Setup
  • Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
  • USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
  • Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.

Setting Configuration

Termite Setup Screen
  • For windows system, you can use terminal emulator program Termite to configure the device.
  • Termite can be downloaded at http://www.compuphase.com/software_termite.htm
  • Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port.
  • Follow the setting accordingly


Download

Retrieved from "https://wiki.pine64.org/index.php?title=Wifi_Remote_I2c&oldid=378"