ROCK64 Software Releases

From PINE64
Revision as of 22:30, 6 August 2021 by Jaredmoody (talk | contribs) (This section had lots of outdated information: - Manjaro *does* publish rock64 images, the 19.04 images hosted on pine64.org are now unusable, and I wasn't able to get the manjaro arm installer to work either, but it's not necessary to use as images are available from manjaro.)
Jump to navigation Jump to search

Linux Image Releases

Armbian

Armbian.png
  • Version 5.88 onward support Rock64-v3 board
  • To find out more about Armbian and available options please visit their site
  • Armbian pack as 7zip, please unzip first before dd.
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher

Armbian Ubuntu Focal XFCE Desktop [microSD / eMMC Boot]

Armbian Ubuntu Bionic XFCE Desktop [microSD / eMMC Boot]

Armbian Debian Buster for Server and Light Desktop [microSD / eMMC Boot]

Armbian Ubuntu Focal for Server and Light Desktop [microSD / eMMC Boot]


AOSC

Aosc.png
  • To learn more about AOSC, please visit the official AOSC website
  • AOSC using LZ4 compression algorithm, please visit the LZ4 github site for utility
  • 8GB microSD card or eMMC module and above
  • Login with
    • username: aosc
    • password: anthon

AOSC KDE Community Build Image [microSD and eMMC Boot]

AOSC GNOME Community Build Image [microSD and eMMC Boot]

AOSC MATE Community Build Image [microSD and eMMC Boot]

AOSC Cinnamon Community Build Image [microSD and eMMC Boot]

AOSC XFCE Community Build Image [microSD and eMMC Boot]

AOSC LXDE Community Build Image [microSD and eMMC Boot]


Manjaro ARM

File:Manjaro.png

Manjaro editions for Rock64 are available directly from Manjaro.

Manjaro Rock64 Download Page

  • Only support ROCK64 ver2 SBC
  • To learn more about Manjaro please visit Manjaro Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher

Ubuntu 18.04 Bionic by ayufan

Penguin.png
  • ayufan ROCK64 Linux Build GitHub
  • Forum thread concerning this release can be found here
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: rock64
    • password: rock64

Ubuntu 18.04 Bionic LXDE Desktop (armhf) Image [microSD / eMMC Boot] [0.9.14]

Ubuntu 18.04 Bionic minimal 64bit (arm64) Image [microSD / eMMC Boot] [0.9.14]

Ubuntu 18.04 Bionic minimal 32bit (armhf) Image [microSD / eMMC Boot] [0.9.14]

Ubuntu 18.04 Bionic containers (DockerCE & Kubernetes) Image [microSD / eMMC Boot] [0.9.14]

Slackware

Slackware.jpg


Slackware Aarch64 XFCE Community Build Image [microSD Boot]

Slackware Aarch64 Miniroot Community Build Image [microSD Boot]

  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_08May18-4.4.126-rock64-build-20180508.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.


DietPi

Dietpi.png


LibreELEC(KODI)

Libreelec.jpg

Official LibreElec KODI Build Image [microSD / eMMC boot]


Volumio 2 Digital Audio Player

Volumio.png
  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • You can follow the ongoing discussion about Volumio on the PINE64 forum

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.528-2019-01-12]

  • DD image (for 8GB microSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/


Lakka

Lakka.png

Lakka Community Build Image [microSD / eMMC Boot]


Debian Stretch

Debian.png

Debian Stretch Minimal 64bit (arm64) OS Image [microSD / eMMC Boot] [0.8.3]


Debian by mrfixit2001

Debian.png

Minimal Debian [microSD / eMMC Boot]


OpenMediaVault

Omv.png

Jessie OpenMediaVault Community Build Image [microSD to eMMC] [0.5.15-136] by ayufan

* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases

Stretch OpenMediaVault OS Image 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Stretch OpenMediaVault OS Image 64bit (arm64) [microSD / eMMC Boot] [0.8.3]


NextCloudPi

Nextcloudpi.png

NextCloudPi Community Build Image [microSD / eMMC Boot] [03-10-19]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the PINE64 forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234


Recalbox

RB.png

Recalbox Community Build Image [microSD / eMMC boot]


Cent OS [No Longer Maintained]

Centos.png

CentOS-7 Community Build Image [microSD Boot]

  • Only support ROCK64 ver2 SBC
  • Centos-7.4.1708 with kernel from Armbian-5.69 (minimum build)
  • To find out more on installation process, please visit their Project31 site
  • Login with
    • username: root
    • password: centos


NEMS Linux [No Longer Maintained]

Nems.jpg

https://files.pine64.org/sw/pine64_installer/json/nems.jpg

  • Only support ROCK64 ver2 SBC
  • NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
  • To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the PINE64 forum thread
  • Login with
    • Username: nemsadmin
    • Password: nemsadmin
  • Installation Guide
  • To find out more on NEM Linux, please visit their site

NEMS Linux [microSD / eMMC boot] [v1.5 - build 2]


Fedora [No Longer Maintained]

Fedora1.png

Fedora Minimal Community Build Image [microSD boot] [Preliminary Build]


BSD Image Releases

NetBSD

Netbsd.png


OpenBSD

Puffy mascot openbsd.png


Android Image Releases

Android TV 9.x eMMC (No Google Play)

File:Android 9.png

* For install Playstore on Android 9.0, please follows this forum thread

Android 9.0 Stock Image [eMMC Boot] using DD method [20190617]

  • DD image to eMMC module using USB adapter for eMMC module and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module


Android 9.0 Stock Image [eMMC Boot] using ROCKChip tools method [20190617]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at top USB 2.0 port, needs USB type A to type A cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This is Android TV build version


Android 9.0 Stock Rooted Image [eMMC Boot] using DD method [20190618]

  • DD image to eMMC module using USB adapter for eMMC module and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module


Android 9.0 Stock Rooted Image [eMMC Boot] using ROCKChip tools method [20190618]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at top USB 2.0 port, needs USB type A to type A cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This is Rooted Android TV build version
  • Guide to flashing eMMC using Rockchip Tools
  • Direct download from pine64.org
    • MD5 (GZip file): FC5F80C3A939AD0F8DCE5B85F22D20A1
    • File Size: 544MB

Android 9.x (No Google Play)

File:Android 9.png

Android 9.0 Stock Rooted Image [microSD Boot] using DD method [20190621]


Android 9.0 Stock Rooted Image [microSD Boot] using ROCKChip SDDisk tools method [20190621]

Android 8.x TV eMMC (preinstalled Google Play Store)

File:Android 8.png

Android 8.1. Stock Image [eMMC Boot] using DD method [20180606]

  • DD image to eMMC module. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): C05846B89A6483DA911CEA604627524F
    • File Size: 561MB

Android 8.1. Stock Image [eMMC Boot] using ROCKChip tools method [20180606]

Android 8.x TV

File:Android 8.png

Android 8.1. Stock Image [microSD Boot] [20180623]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): 85372A568C114ADE7CD9632CEBA193E9
    • File Size: 575MB

Android 7.x eMMC

File:Android 7.png

Android 7.1.2 Stock Image [microSD to eMMC] [Rooted] [20171204]

  • DD image to microSD card. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 43443467DFCAEDE767556843EB4D6707
    • File Size: 558MB
  • See ROCK64 MAC Address on how to set the MAC address.

Android 7.1.2 Stock Image [eMMC Boot] [Rooted] [20171204]

  • Please unzip first and then using Android tool to flash in
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 7C831F9E6B4311A3B3D4743FBBB628D0
    • File Size: 544MB
  • See ROCK64 MAC Address on how to set the MAC address.


Android 7.x

File:Android 7.png

Android 7.1.2 Stock Image [microSD Boot] [Rooted] [20171204]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 56520ED3DB6E587DA140AD314A055EB2
    • File Size: 544MB


Android TV 7.x eMMC

File:Android 7.png

Android TV 7.1 Community Build Image [microSD to eMMC] [v0.3.4-r86] by ayufan

Android TV 7.1 Community Build Image [eMMC] by ayufan


Android TV 7.x

File:Android 7.png

Android TV 7.1 Community Build Image [microSD Boot] by ayufan


Android SDK

Android P SDK [v9.0]

Retrieved from "https://wiki.pine64.org/index.php?title=ROCK64_Software_Releases&oldid=10978"