Difference between revisions of "User:Pfeerick/Pfeerick-scratch-page"
Jump to navigation
Jump to search
m (Heading change) |
|||
| Line 20: | Line 20: | ||
== | == Overview == | ||
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | ||
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | ||
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. | ||
== Board Layout == | |||
[[File:PineCube-768x576.jpg|400px]] | |||
{{note|1=BELOW INFO IS COMPLETELY INVALID FOR PINECUBE}} | |||
{| class="wikitable sortable" | |||
! Diagram !! Schematic<br>designator || Silkscreen<br>label !! Number<br>of pins !! Description | |||
|- | |||
| style="text-align: center;" | 2 || U39 || PI-2-bus || style="text-align: center;" | 40 || Pi-2 bus | |||
|- | |||
| style="text-align: center;" | 4 || J8 || +FAN- || style="text-align: center;" | 2 || PWM controlled fan header | |||
|- | |||
| style="text-align: center;" | 5 || J10 || SPDIF || style="text-align: center;" | 3 || SPDIF header | |||
|- | |||
|} | |||
== I/O == | == I/O == | ||
Revision as of 23:35, 18 October 2020
DO NOT USE THIS PAGE FOR REFERENCE MATERIAL FOR THE PINECUBE
| Pinecube | |
|---|---|
| CPU | Allwinner(Sochip) ARM Cortex-A7 MPCore, 800MHz |
| RAM | 128MB DDR3 |
| CPU | Quad-Core ARM Cortex-A53 |
| Camera | OV5640, 5Mpx |
| Storage | MicroSD slot, bootable 128Mb SPI Nor Flash, bootable |
| Dimensions | 55mm x 51mm x 51.5mm |
| Network | WiFi |
| Screen | optional 4.5" RGB LCD screen |
| Misc | Volume and home buttons Speakers and microphone |
| Power | |
| MicroUSB/GPIO | 5V 1A |
| PoE | 4V-18V |
| Battery | optional 950-1600mAh |
Overview
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit.
Board Layout
BELOW INFO IS COMPLETELY INVALID FOR PINECUBE
| Diagram | Schematic designator |
Silkscreen label |
Number of pins |
Description |
|---|---|---|---|---|
| 2 | U39 | PI-2-bus | 40 | Pi-2 bus |
| 4 | J8 | +FAN- | 2 | PWM controlled fan header |
| 5 | J10 | SPDIF | 3 | SPDIF header |
I/O
- 10/100Mbps Ethernet with passive PoE
- USB 2.0 A host
- 26 pins GPIO port
- 2x 3.3V Ouptut
- 2x 5V Output
- 1x I2C
- 2x UART
- 2x PWM
- 1x SPI
- 1x eMMC/SDIO/SD (8-bit)
- 6x Interrupts
- Note: Interfaces are multiplexed, so they can't be all used at same time
- Internal microphone
Power
- 5V 1A from MicroUSB Port or GPIO port
- 4V-18V from Ethernet passive PoE
- Battery: optional 950-1600mAh model: 903048 Lithium Polymer Ion Battery Pack, can be purchase at Amazon.com
PineCube board information, schematics and certifications
- PineCube mainboard schematic:
- PineCube faceboard schematic:
- PineCube certifications:
Datasheets for components and peripherals
- Allwinner (Sochip) S3 SoC information:
- X-Powers AXP209 PMU (Power Management Unit) information:
- CMOS camera module information:
- LCD touch screen panel information:
- Lithium battery information:
- WiFi/BT module information:
Operating Systems
Mainlining Efforts
| Linux kernel | ||
|---|---|---|
| Type | Link | Available in version |
| Devicetree Entry Pinecube | https://lkml.org/lkml/2020/9/22/1241 | expected in 5.10 |
| Correction for AXP209 driver | https://lkml.org/lkml/2020/9/22/1243 | 5.9 |
| U-boot | ||
| Buildroot | ||
Stock Linux
SDK
Stock Linux
- Direct Download from pine64.org
- MD5 (7zip file): efac108dc98efa0a1f5e77660ba375f8
- File Size: 3.50GB
How to compile
Recommended system requirements:
- OS: (L)Ubuntu 16.04
- CPU: 64-bit based
- Memory: 8 GB or higher
- Disk: 15 GB free hard disk space
Install required packages
sudo apt-get install p7zip-full git make u-boot-tools libxml2-utils bison build-essential gcc-arm-linux-gnueabi g++-arm-linux-gnueabi zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32z1-dev
Install older Make 3.82 and Java JDK 6
pushd /tmp wget https://ftp.gnu.org/gnu/make/make-3.82.tar.gz tar xfv make-3.82.tar.gz cd make-3.82 ./configure make sudo apt purge -y make sudo ./make install cd .. # Please, download jdk-6u45-linux-x64.bin from https://www.oracle.com/java/technologies/javase-java-archive-javase6-downloads.html (requires free login) chmod +x jdk-6u45-linux-x64.bin ./jdk-6u45-linux-x64.bin sudo mkdir /opt/java/ sudo mv jdk1.6.0_45/ /opt/java/ sudo update-alternatives --install /usr/bin/javac javac /opt/java/jdk1.6.0_45/bin/javac 1 sudo update-alternatives --install /usr/bin/java java /opt/java/jdk1.6.0_45/bin/java 1 sudo update-alternatives --install /usr/bin/javaws javaws /opt/java/jdk1.6.0_45/bin/javaws 1 sudo update-alternatives --config javac sudo update-alternatives --config java sudo update-alternatives --config javaws popd
Unpack SDK and then compile and pack the image
7z x 'PineCube Stock BSP-SDK ver1.0.7z' mv 'PineCube Stock BSP-SDK ver1.0' pinecube-sdk cd pinecube-sdk/camdroid source build/envsetup.sh lunch mklichee make -j3 pack