Difference between revisions of "ROCK64 MAC Address"
Jump to navigation
Jump to search
(added category) |
|||
| Line 6: | Line 6: | ||
# Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button | # Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button | ||
# Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the MacAddress of the ROCK64 | # Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the MacAddress of the ROCK64 | ||
[[Category:Rock64]] | |||
Revision as of 21:08, 17 October 2020
- Set MacAddress on ROCK64 with "Android eMMC" image
- Windows ADB driver package installation is required as prerequisite
- Download and unzip WNpctool_V1.1.2_1226.zip. Run WNpctool.exe "as Administrator" on Windows OS
- Press recovery button on ROCK64 and power ON the ROCK64. After 2 seconds release the recovery button
- Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom)
- Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button
- Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or netscan to check the MacAddress of the ROCK64