Difference between revisions of "PinePhone v1.2a"
Jump to navigation
Jump to search
(→Known issues: correction) |
|||
| Line 8: | Line 8: | ||
== Changes from v1.2 == | == Changes from v1.2 == | ||
* A thermal pad was added to the SoC, thermally distributing the CPU's heat among the LCD screen. | * A thermal pad was added to the SoC, thermally distributing the CPU's heat among the LCD screen. | ||
* Internal thermal foil was added over top of the metal shielding on the motherboard | |||
* Fixed a rectangular dead spot of the touchscreen under the speaker grill | * Fixed a rectangular dead spot of the touchscreen under the speaker grill | ||
* Added thermal foil to back cover | * Added thermal foil to back cover | ||
Revision as of 17:21, 13 October 2020
The PinePhone v1.2a is a hardware revision of the PinePhone that started shipping late 2020.
This page contains information and resources which are specific to the v1.2a revision of the PinePhone. For other revisions or for resources related to all PinePhone revisions, see PinePhone#Hardware Revisions.
Schematics
- Hardware schematic v1.2a (2020-06-08, for Community Edition: postmarketOS)
Changes from v1.2
- A thermal pad was added to the SoC, thermally distributing the CPU's heat among the LCD screen.
- Internal thermal foil was added over top of the metal shielding on the motherboard
- Fixed a rectangular dead spot of the touchscreen under the speaker grill
- Added thermal foil to back cover
- Antenna changes
- USB-C CC fix for video out and OTG functionality
Known issues
The backlight issue of v1.2 is still present, see PinePhone v1.2#Backlight. The cause for this is a VBUS_CTRL signal from the ANX7688 to the PL9 pin of the SoC, https://xnux.eu/log/#022. Supposedly this can be fixed by removing the R1318 resistor.