RK3399 boot sequence

Rockchip RK3399 boot sequence

This is for the Pine64 ROCKPro64 single board computer, and the Pinebook Pro laptop boot sequence details. While some of this may also apply to other RK3399 computers, that is up to the reader to make any appropriate changes.

Description

There are 3 sections for the boot loader. They are in order, without gap, though their is no need to use all the space in each section.
Here are the details:

Start in sectors	Size in sectors	Name	Description
64	16320	IDBLoader	SoC initialization code
16384	8192	OS loader	Generally U-Boot
24576	8192	TrustedFirmware-A

General maintenance

If a new U-Boot is supplied, it is generally installed similar to this;

# dd if=/boot/idbloader.img conv=notrunc seek=64    of=/dev/mmcblkX
# dd if=/boot/u-boot.itb    conv=notrunc seek=16384 of=/dev/mmcblkX

Different devices

The RK3399 boots to multiple devices. Boot device selection is done in the following order, it can not be changed.
If a device is blank / un-used, the SoC code moves on to the next device in the list.

• SPI
• eMMC
• SD card

However, whence the user boot code runs, it can then give priority to other devices, if available. The following devices are not directly bootable;

• NVMe
• USB 3
• WiFi

They can be made bootable by using one of the other devices as an initial boot loader. For example, several people have gotten their NVMe drives to be bootable, with "/boot" and "/" on the NMVe. This either entails using the SPI or eMMC has the initial boot loader, with code to support PCIe NVMe devices.

Boot loader development

There are several projects that have their own versions of U-Boot, with different features. Here are some of the more common ones at present, 2020/06/14;

• Rockchip
• The original default Debian
• Manajaro
• U-Boot mainline

Grub as the target of the boot loader

It is possible to use Grub as the target of U-Boot. This would allow;

• Selecting a different boot device
• Choosing a partition on a boot device for booting
• Different kernels
• Changes in kernel command line options

However, at present, Grub does not support the video & keyboard of the Pinebook Pro. So, any selection is done through the serial console.