Difference between revisions of "PinePhone"

From PINE64
Jump to navigation Jump to search
(Rewrite page with the start of a beautiful new timeline)
Line 1: Line 1:
= Phase 3 (final) of PINE64 Smartphone "PinePhone"  =
The PinePhone is a smartphone platform created by the Pine64 community and supported by many partner projects. It should be available for five years from its consumer launch date, which is expected to occur in March 2020.
PINE64 Smartphone dubbed "PinePhone" is used in the community effort privacy smartphone and collaborates with mobile OS developers/communties.  
PinePhone development has been broken down into three distinct phases:
* First phase - Project Anakin
* Second phase - purpose-built development kit code named "Don't be evil" and introduced at FOSDEM 2019
* Lastly, the third phase which is the PinePhone itself - scheduled to be prototype released in September 2019 and early developer access batch released in Q4 2019 (pending on software development).


== PinePhone Concepture Photo ==
== Specifications ==
[[File:PinePhone_concepture_drawing.jpg]]
 
== PinePhone Case Photos ==
[[File:PinePhone_Photo-4.jpg]]
[[File:PinePhone_Photo-2.jpg]]
[[File:PinePhone_Photo-3.jpg]]


== Phone Information ==
* LAUNCH:
** Announced: FOSDEM 2019, dated: 2 February 2019
** Prototype: Q3, 2019
** Expected Released: late Q4, 2019, pending on software availability
** Availability: at least 5 years
* BODY:
* BODY:
** Dimensions: 160.5mm x 76.6mm x 9.2mm
** Dimensions: 160.5mm x 76.6mm x 9.2mm
Line 38: Line 21:


* MEMORY:
* MEMORY:
** Internal: 16-64GB eMMC, 2GB-3GB LPDDR3 SDRAM
** Internal: 16GB eMMC, 2GB LPDDR3 SDRAM
** Expansion: micro SD Card support SDHC and SDXC
** Expansion: micro SD Card support SDHC and SDXC


Line 56: Line 39:
** WLAN: Wi-Fi 802.11 b/g/n, single-band, hotspot
** WLAN: Wi-Fi 802.11 b/g/n, single-band, hotspot
** Bluetooth: 4.0, A2DP
** Bluetooth: 4.0, A2DP
** GNSS: Yes, GPS/GLONASS/BeiDou/Galileo/QZSS with A-GPS
** GPS: Yes, with A-GPS, GLONASS
** NFC: No
** NFC: No
** FM Radio: No
** FM Radio: No
** USB: type C (SlimPort), USB Host, DisplayPort Alternate Mode output
** USB: type C (SlimPort), USB Host, DisplayPort Alternate Mode output
 
** 3.5mm jack doubles as hardware UART if killswitch 6 is deactivated
* LTE module information:
** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EG25-G_LTE_Specification_V1.1_Preliminary_20180522%20(002).pdf Quectel EG25-G LTE Module Specification]


* FEATURES:
* FEATURES:
** Sensors: Accelerometer, gyro, proximity, ambient light, magnetometer(compass)
** Sensors: Accelerometer, gyro, proximity, ambient light, magnetometer(compass)
** Actuator: Vibrator
** Actuator: Vibrator
** Privacy Switches: LTE (include GPS), Wifi/BT, Mic, and Camera
** Privacy Switches: Modem (disables cellular modem and GNSS/GPS), Wifi & Bluetooth, Microphone, and Cameras


* BATTERY:
* BATTERY:
** Removable Li-Po 3000-3300 mAh battery
** Removable Li-Po 2750-3000 mAh battery
** Charging: USB type-c, 15W 5V 3A Quick Charge, follows USB PD specification
** Charging: USB Type-C, 15W 5V 3A Quick Charge, follows USB PD specification


* PRICE:
* PRICE:
** USD $150 (16GB eMMC/2GB LPDDR3 SDRAM configuration)
** USD $150 (16GB eMMC/2GB LPDDR3 SDRAM configuration)
No other configurations of the PinePhone are available at this time.
== History ==
The PinePhone was announced at [https://archive.fosdem.org/2019/ FOSDEM 2019], February 2-4, 2019. The first [[Project Don't be evil]] devkit was on display at the Pine64 booth during the weekend.
=== Hardware revisions ===
The PinePhone platform went through two "developer kit" phases that partner projects used to prove their software on the upcoming platform.
#. [[Project Anakin]]
#. [[Project Don't be evil]]
Additionally, two "early adopter" revisions of the platform were created:
#. [[PinePhone 1.0 "Developer"]]
#. [[PinePhone 1.1 "Brave Heart"]]
The first generally available PinePhone batch was [[PinePhone 1.1 "Brave Heart"]]. Pre-orders for this batch started on November 15, 2019. It is expected to ship sometime in December 2019 to January 2020.
A "full release" Pinephone, which will likely have board revision 1.2, will be released in 2020.
== Killswitch configuration ==
The PinePhone features six switches that can be used to configure its hardware. They are numbered 1-6, with switch 1 located nearest to the modem. Their on position is toward the top of the phone.
#. Modem: On enables 2G/3G/4G communication and GNSS hardware, off disables.
#. WiFi/BT: On enables Wi-Fi and Bluetooth communication hardware, off disables.
#. Microphone: On enables audio input from on-board microphones (not 3.5mm jack), off disables.
#. Rear camera: On enables the rear camera, off disables.
#. Front camera: On enables the front camera, off disables.
#. Headphone: On enables audio input and output via the 3.5mm audio jack, off switches the jack to hardware UART mode.
== PinePhone Concepture Photo ==
[[File:PinePhone_concepture_drawing.jpg]]
== PinePhone Case Photos ==
[[File:PinePhone_Photo-4.jpg]]
[[File:PinePhone_Photo-2.jpg]]
[[File:PinePhone_Photo-3.jpg]]

Revision as of 01:18, 20 November 2019

The PinePhone is a smartphone platform created by the Pine64 community and supported by many partner projects. It should be available for five years from its consumer launch date, which is expected to occur in March 2020.

Specifications

  • BODY:
    • Dimensions: 160.5mm x 76.6mm x 9.2mm
    • Weight: Between 180-200 gram
    • Build: Plastic
    • SIM: Micro-SIM
  • DISPLAY:
    • Type: HD IPS capacitive touchscreen, 16M colors
    • Size: 5.95 inches
    • Resolution: 1440x720 pixels, 18:9 ratio
  • PLATFORM:
    • OS: Various open source mainline Linux or BSD mobile OSes
    • Chipset: Allwinner A64
    • CPU: Quad-core 1.2 GHz ARM Cortex A-53
    • GPU: MALI-400
  • MEMORY:
    • Internal: 16GB eMMC, 2GB LPDDR3 SDRAM
    • Expansion: micro SD Card support SDHC and SDXC
  • CAMERA:
    • Main Camera: Single 5MP, 1/4", LED Flash
    • Selfie Camera: Single 2MP, f/2.8, 1/5"
  • SOUND:
    • Loudspeaker: Yes
    • 3.5mm jack with mic: Yes
  • COMMUNICATION:
    • LTE-FDD: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B26/ B28
    • LTE-TDD: B38/ B39/ B40/ B41
    • WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
    • GSM: 850/900/1800/1900MHz
    • WLAN: Wi-Fi 802.11 b/g/n, single-band, hotspot
    • Bluetooth: 4.0, A2DP
    • GPS: Yes, with A-GPS, GLONASS
    • NFC: No
    • FM Radio: No
    • USB: type C (SlimPort), USB Host, DisplayPort Alternate Mode output
    • 3.5mm jack doubles as hardware UART if killswitch 6 is deactivated
  • FEATURES:
    • Sensors: Accelerometer, gyro, proximity, ambient light, magnetometer(compass)
    • Actuator: Vibrator
    • Privacy Switches: Modem (disables cellular modem and GNSS/GPS), Wifi & Bluetooth, Microphone, and Cameras
  • BATTERY:
    • Removable Li-Po 2750-3000 mAh battery
    • Charging: USB Type-C, 15W 5V 3A Quick Charge, follows USB PD specification
  • PRICE:
    • USD $150 (16GB eMMC/2GB LPDDR3 SDRAM configuration)

No other configurations of the PinePhone are available at this time.

History

The PinePhone was announced at FOSDEM 2019, February 2-4, 2019. The first Project Don't be evil devkit was on display at the Pine64 booth during the weekend.

Hardware revisions

The PinePhone platform went through two "developer kit" phases that partner projects used to prove their software on the upcoming platform.

  1. . Project Anakin
  2. . Project Don't be evil

Additionally, two "early adopter" revisions of the platform were created:

  1. . PinePhone 1.0 "Developer"
  2. . PinePhone 1.1 "Brave Heart"

The first generally available PinePhone batch was PinePhone 1.1 "Brave Heart". Pre-orders for this batch started on November 15, 2019. It is expected to ship sometime in December 2019 to January 2020.

A "full release" Pinephone, which will likely have board revision 1.2, will be released in 2020.

Killswitch configuration

The PinePhone features six switches that can be used to configure its hardware. They are numbered 1-6, with switch 1 located nearest to the modem. Their on position is toward the top of the phone.

  1. . Modem: On enables 2G/3G/4G communication and GNSS hardware, off disables.
  2. . WiFi/BT: On enables Wi-Fi and Bluetooth communication hardware, off disables.
  3. . Microphone: On enables audio input from on-board microphones (not 3.5mm jack), off disables.
  4. . Rear camera: On enables the rear camera, off disables.
  5. . Front camera: On enables the front camera, off disables.
  6. . Headphone: On enables audio input and output via the 3.5mm audio jack, off switches the jack to hardware UART mode.

PinePhone Concepture Photo

PinePhone concepture drawing.jpg

PinePhone Case Photos

PinePhone Photo-4.jpg PinePhone Photo-2.jpg PinePhone Photo-3.jpg

Retrieved from "https://wiki.pine64.org/index.php?title=PinePhone&oldid=4024"