Difference between revisions of "Wifi Remote I2c"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
[[File:PMWF01A_Wifi_Remote_IO_Rev3-1.jpg|thumb|Hardware Setup]] | [[File:PMWF01A_Wifi_Remote_IO_Rev3-1.jpg|thumb|Hardware Setup]] | ||
* Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port. | * Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port. | ||
* The USB/UART Bridge is base on [http://www.silabs.com/products/interface/usb-bridges/classic-usb-bridges/Pages/usb-to-uart-bridge.aspx Silicon Lab CP2012 chipset]. | |||
* USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here] | * USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here] | ||
* Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device. | * Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device. | ||
Revision as of 04:36, 14 May 2016
Quick Start Guide
Hardware Setup
- Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
- The USB/UART Bridge is base on Silicon Lab CP2012 chipset.
- USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
- Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.
Setting Configuration
- For windows system, you can use terminal emulator program Termite to configure the device.
- Termite can be downloaded at http://www.compuphase.com/software_termite.htm
- Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port.
- Follow the setting accordingly