Difference between revisions of "User:Aren/PinePhone Mainline Status"
Jump to navigation
Jump to search
(work on the front camera is in progress) |
(fill out information on the serial port) |
||
| Line 5: | Line 5: | ||
! Feature !! status !! notes | ! Feature !! status !! notes | ||
|- | |- | ||
| Serial | | Serial port (in the headphone jack) | ||
| style="background:LightGreen;"| Upstream | |||
| Subject to hardware issues [https://xnux.eu/log/075.html] | |||
Extra patches: | |||
* 7fe2f541f9336 arm64: dts: sun50i-a64: Set fifo-size for uarts[https://xff.cz/git/linux/commit/?h=speed-6.7&id=2bbc4d840e74c240c781b21fab15ebee73e07682] | |||
* da34508bae5de tty: serial: 8250-dw: Use fifo-size from DTS[https://xff.cz/git/linux/commit/?h=speed-6.7&id=e4e9bcd9854d2697a1e5c6717a02597e7775dd7e] | |||
Both patches go together, and appear to be a performance optimization only. | |||
|- | |- | ||
| Display || Partial || doesn't run at 60hZ (TODO: add link to megi's patches) | | Display || Partial || doesn't run at 60hZ (TODO: add link to megi's patches) | ||
Revision as of 17:45, 20 January 2024
Overview
| Feature | status | notes |
|---|---|---|
| Serial port (in the headphone jack) | Upstream | Subject to hardware issues [1]
Extra patches:
Both patches go together, and appear to be a performance optimization only. |
| Display | Partial | doesn't run at 60hZ (TODO: add link to megi's patches) |
| Touch Input | untested | |
| Fromt camera | in progress | Front camera driver should be upstream in 6.8-rc1, but will need testing and dts parts to activate[4]. (TODO: track them down links to source & lkml threads) |
| Rear camera | untested | driver should be upsream |
| Wifi | in progress[5] | The current driver has very poor code quality and will not be suitable for mainline. Work on a replacement is in progress. |
| Usb | partial | see #Usb |
| Leds | untested | iirc just uses gpio driver, should be generic. Status led doesn't have keep power in suspend enabled in upstream device tree. |
| Modem | untested | |
| Modem Audio | untested | |
| Bluetooth | untested | |
| Audio | untested | |
| Accelerometer | untested | |
| Proximity sensor | untested | |
| Charging | Partial | See usb section |
Usb
| Feature | status | notes |
|---|---|---|
| Role Switch / Gadget mode | out of tree | See #ANX7688 |
| Host mode e.g. external storage or input | untested | |
| Display output (TODO: which spec? usb dp alt mode?) | out of tree | See #ANX7688 |
| USB-C Power Delivery | out of tree | See #ANX7688 |
| USB BC | Upstream | BC1.2 is mostly handled by the axp803 pmic. This is usually what handles current negotiation when using A-to-C cables and dumb chargers. |
ANX7688
There is an out of tree driver for the anx7688 chip, but it was written specifically for the PinePhone. This driver may require non trivial refactoring to be acceptable upstream.