Difference between revisions of "ROCK64 MAC Address"

Revision as of 16:58, 31 December 2020

Windows ADB driver package installation is required as prerequisite
Download and unzip WNpctool_V1.1.2_1226.zip. Run WNpctool.exe "as Administrator" on Windows OS
Press recovery button on ROCK64 and power ON the ROCK64. After 2 seconds release the recovery button
Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom)
Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button
Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or netscan to check the MacAddress of the ROCK64

Revision as of 16:57, 31 December 2020 (view source) Fxc (talk \| contribs) m (Fxc moved page Set MacAddress on ROCK64 to Set MacAddress on: ROCK64 Mac Address) ← Older edit	Revision as of 16:58, 31 December 2020 (view source) Fxc (talk \| contribs) m (Fxc moved page Set MacAddress on to ROCK64 MAC Address: actual move) Newer edit →
(No difference)