Difference between revisions of "Pinebook Pro Hardware Accessory Compatibility"
Jump to navigation
Jump to search
Line 48: | Line 48: | ||
| 2242 || KingSpec NE-512 || 512 GB || NE512 || good || || APST enabled<br/>Power states N/A || N/A | | 2242 || KingSpec NE-512 || 512 GB || NE512 || good || || APST enabled<br/>Power states N/A || N/A | ||
|- | |- | ||
| 2280 || Patriot P300 || 256 GB || P300P256GM28US || good || Booted successfully with / on NVMe and /boot on eMMC (Armbian Buster) || APSTE disabled by default<br/> PS 0: 4.50W<br/> PS 1: 2.70W<br/> PS 2: 2.16W|| | | 2280 || Patriot P300 || 256 GB || P300P256GM28US || good || Booted successfully with / on NVMe and /boot on eMMC (Armbian Buster) || APSTE disabled by default<br/> PS 0: 4.50W<br/> PS 1: 2.70W<br/> PS 2: 2.16W<br/>PS 3: 0.07W<br/>PS 4: 0.002W|| | ||
| | | | ||
|} | |} |
Revision as of 02:45, 18 February 2020
Pinebook Pro accessories - by type
This page was started in the early days when not all accessories/peripherals were working.
NVMe SSD drives
Note that only PCIe type M.2 drives will work. Any SATA or USB type M.2 card will NOT work.
Type | Make/Model | Size | Hardware IDs | Result | Notes | Power options Active only |
Save power setting? | |
---|---|---|---|---|---|---|---|---|
2242 | Toshiba OCZ RC 100 | 240 GB | RC100-M22242-240G | good | ||||
2242 | Lexar NM520 | 256 GB | LNM520-256RBNA | good | For some data on power use and performance, see here. | PS 0: 3.05W PS 1: 2.44W PS 2: 2.02W |
No. See workaround. | |
2280 | XPS SX8200 | 512 GB | ASX8200PNP-512GT-C | good | Performed these steps for physical installation. Currently rooting from drive. | |||
2280 | Intel 660p M.2 | 512 GB | SSDPEKNW512G8X1 | good | PS 1 (2.70W) will work without issues, even under heavy load. Recommended over PS 2, as PS 2 will incur an additional 80% performance penalty. APSTE shows enabled but drive does not support it. | No | ||
2280 | Intel 660p M.2 | 1 TB | SSDPEKNW010T8X1 | good | PS 0: 4.00W PS 1: 3.00W PS 2: 2.20W APSTE Disabled by default |
No | ||
2280 | Samsung 970 EVO Plus | 250 GB | MZ-V7S250BW | fail | Tested on Manjaro-ARM as root drive. Limited to PS 2 and Volatile Write Cache off gives the most stable results, but it will still hang on a hdparm test. | |||
2280 | Samsung 970 EVO Plus | 500 GB | MZ-V7S500 | fail | Too power hungry? | PS 0: 6.2W PS 1: 4.3W PS 2: 2.1W |
||
2280 | Samsung 970 EVO | 1 TB | MZ-V7E1T0BW | fail | Too power hungry? | |||
2280 | Corsair MP300 | 120 GB | CSSD-F120GBMP300 | good | PS 0: 3.00W PS 1: 2.00W PS 2: 2.00W PS 3: 0.1W PS 4: 0.005W APSTE Disabled by default |
|||
2280 | Silicon Power P34A60 | 256 GB | SPCC M.2 PCIe SSD | detected | ASIN B07ZH6QR8Q "Silicon Power PCIe M.2 NVMe SSD 256GB Gen3x4" / PCIe A60 | PS 0: 6.77W PS 1: 5.71W PS 2: 5.19W APSTE Enabled by default |
No | |
2280 | Silicon Power P34A60 | 256 GB | ??? | fail | Isn't detected | |||
2280 | Sabrent Rocket | 256 GB | SB-ROCKET-256 | good | No | |||
2242 | Sabrent Rocket Nano | 512 GB | SB-1342-512 | good* | No touchpad issues, didn't trim NVME adapter board. (*Might be too power hungry. More testing needed.) |
|||
2280 | MyDigitalSSD SBXe | 960 GB | good | APST enabled Power states N/A |
N/A | |||
2280 | HP SSD EX900 | 250GB | good | No low-power modes available | ||||
2280 | WD BLUE SN550 | 1TB | WDC WDS100T2B0C-00PXH0 | good | Booted successfully from NVMe (Bionic MATE) | PS 0: 3.50W PS 1: 2.70W PS 2: 1.90W APSTE Disabled by default |
N/A | |
2280 | WD Blue SN500 | 500GB | WDS500G1B0C | fail | Works OK on power state 2 (2.5W), but hangs the system whenever there is intense IO (peak draw) on the drive | |||
2242 | WD PC SN520 | 256GB | - | fail | Power LED Flashes. Nothing else happens. | |||
2280 | WD BLACK SN750 | 250GB | WDS250G3X0C-00SJG0 | good | No touchpad issues, didn't trim NVME adapter board. | APSTE disabled by default PS 0: 5.00W PS 1: 3.50W PS 2: 3.00W |
||
2242 | KingSpec NE-512 | 512 GB | NE512 | good | APST enabled Power states N/A |
N/A | ||
2280 | Patriot P300 | 256 GB | P300P256GM28US | good | Booted successfully with / on NVMe and /boot on eMMC (Armbian Buster) | APSTE disabled by default PS 0: 4.50W PS 1: 2.70W PS 2: 2.16W PS 3: 0.07W PS 4: 0.002W |
USB hardware
Type | Make/Model | Hardware IDs | Result | Notes | |
---|---|---|---|---|---|
USB-2 SDHC reader | Sandisk MobileMate+ | 0781:b2b3 | good | ||
USB-3 SDHC/CF reader | Transcend TS-RDF8K | 8564:4000 | good | ||
USB-C Hub | Totu 8-in-1 | 058f:8468, 2109:0817 USB3, 1a40:0801, 2109:2817 USB2, bda:8153 RTL8153 Gigabit Ethernet | Network, USB, Card Reader, Power Good, HDMI Not Working | Amazon Smile [1] | |
USB-3 combo hub (network, card slots, usb ports) | generic | 05e3:0610 hub, 0bda:8153 gigE, 05e3:0743 card reader | Network good, usb ports good, card reader good | ||
USB-C combo hub (network, card slots, usb ports) | generic | 05e3:0612 hub, 0bda:8153 realtek gigE | Network good, usb ports fail, card reader fail | ||
5-1 USB-C hub | from aliexpress | 05e3:0626 hub | HDMI, Network, USB-3, USB-C PD good | Might need changing orientation or USB-C cable | |
Yubikey original | Yubico | 1050:0010 | good | ||
4 Port USB 3 NIC | Delock 62966 | good | 4 individually controllable Gigabit Ethernet Ports. Consider using it with own power supply | ||
USB-2 Fast Ethernet adapter | Realtek RTL8152 | 0bda:8152 | good | ||
USB 3 to Gigabit Ethernet Adapter | Pluggable USB 3.0 to Ethernet Gigabit (ASIX AX88179 chipset) | 0b95:1790 | good | ||
USB-C combo hub | from Amazon | 0c76:161f 0c45:6321 2109:0813 1a40:0101 | good | Everything works: AltMode DP, Ethernet, SD card, USB-A and C, and charging using the stock Debian, and Ubuntu. |
USB C alternate mode DP
Note that only USB C alternate mode Display Port will pass video. Any HDMI, DVI or VGA port must be converted internally by the device from Display Port - or the device won't work for video.
Type | Make/Model | Hardware IDs | Result | Notes | |
---|---|---|---|---|---|
USB-C to HDMI adapter 201018 | Cable Matters | good | Tested up to 1080p30, audio works | ||
USB-C to HDMI adapter | generic | good | Tested up to 4k60 | ||
USB-C to DP Adapter | OrxnQ | good | Advertises support for 4K@60Hz, tested up to 1080p | ||
USB-C HDMI adapter (DP-alt mode) | QGeeM | good | Manjaro 2020-01-25 | ||
USB-C combo hub (HDMI, network, card slots, USB ports) | generic | fail | |||
USB-C combo hub (HDMI, VGA, Ethernet, card slots, USB 2 & 3 | Powlaken | 05e3:0610 0bda:8153 | USB, Power, Ethernet and SD good, HDMI and VGA fail | ||
USB-C Dock (HDMI, VGA, Ethernet, microSD/SD card slots, 2 USB 3 Ports, 1 USB-C Port, USB-Power Passthru | Digitus DA-70865 | USB, Ethernet and MicroSD/SD good, video crashes System (fail). | Tested on Manjaro w/ Kernel 5.5. You have to turn the USB-C connector upside down for it to work. Video seems to be a driver issue. | ||
USB-C Dock (HDMI, VGA, Ethernet, microSD/SD card slots, 2 USB 3 Ports, 1 USB-C Port, USB-Power pass-through) | generic | Ethernet and MicroSD/SD good, USB fail, video up to 1080p. | https://forum.pine64.org/showthread.php?tid=8728 | ||
USB-C Dock (DP, HDMI, 1Gbps Ethernet, SD card slot, 2 USB 3 Ports, USB-C power in port | goFanco | DP, Ethernet & USB good, (HDMI & SD card untested). Video tested good to 1080p | Tested on default Debian | ||
USB-C Dock (HDMI, USB 3.0 x 2, USB-C PD Pass Thru Power Port Up to 100W, SD/TF Card Reader | Hiearcool 7-in-1 | HDMI, USB, Power Port good, SD/TF Reader fail | Default Debian | ||
USB-C 3.0 Multi-Port Hub (HDMI, USB 3.0 x 1, USB-C charge only) | Linden LITCAD17 | HDMI and USB good, Power Port fail | Default Debian & ayufan Ubuntu | ||
USB-C to DP adapter | Nekteck | 04b4:5210 | good | Shows up as "Cypress Semiconductor Corp. Billboard Device" in lsusb and dmesg output. Works in latest Manjaro (as of January 26, 2020) with no issues. | |
USB-C to HDMI adapter | MHL TH002 | good | Tested at 1080p@60 | ||
USB-C combo hub (USB-C power, HDMI, 2xUSB, 1xUSB-C(no power)) | Baseus | good | |||
USB-C Travel Dock with DP ALT-MODE | Targus DOCK411-A | GbE: works, HDMI: works, USB3.0 port: works, VGA: unknown | I could only test the HDMI connector with an 1080p display, so no information about 4K. |
Other hardware
Type | Make/Model | Hardware IDs | Result | Notes |
---|---|---|---|---|
Bluetooth Mouse | HP Z5000 | E5C13AA | good | |
Bluetooth Mouse | Logitech Triathlon M720 | good | ||
Bluetooth Mouse | Logitech Ultra-Thin Touch Mouse | good | Detects battery level as "keyboard" | |
Bluetooth Mouse | Logitech MX Anywhere 2 | good | ||
Bluetooth Mouse | Logitech M535 | 910-004432 | good | |
Bluetooth Mouse | Microsoft Bluetooth Mouse | RJN-00002 | good | |
Bluetooth Mouse | Fenifox low profile | MX106-Black | good | |
Bluetooth Speaker | Ivation Acoustix | good | Use audio sink profile | |
Headphone | Sony WH-1000XM2 | good* | Needs pulseaudio-module-bluetooth. *Recording untested. | |
USB charging cable | - | - | good | Got the cable a while back so may not be identical to current product |
USB Audio & Bluetooth Headset | Sony SBH90C | good | Works well connected via USB Type-C and Bluetooth. | |
SD Card | Samsung Evo Select 512GB | MB-ME512GA/AM | good | |
SD Card | Samsung Evo Plus 64GB | good | Hdparm tested 44MBps read speeds | |
SD Card | Sandisk Ultra 400GB | good | Works fine as a storage extension. Mounted for pictures, etc. | |
Printer | HP DeskJet Ink Advantage 3775 | good* | Using hplip-gui: via USB and WiFi. *Only print function tested. |