Difference between revisions of "Wifi Remote I2c"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
=== Setting Configuration === | === Setting Configuration === | ||
[[File:Wr_Termite2.JPG|thumb]] | [[File:Wr_Termite2.JPG|thumb|Termite Setup Screen]] | ||
* For windows system, you can use terminal emulator program Termite to configure the device. | * For windows system, you can use terminal emulator program Termite to configure the device. | ||
* Termite can be downloaded at http://www.compuphase.com/software_termite.htm | * Termite can be downloaded at http://www.compuphase.com/software_termite.htm | ||
Revision as of 03:44, 14 May 2016
Quick Start Guide
Hardware Setup
- Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
- USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
- Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.
Setting Configuration
- For windows system, you can use terminal emulator program Termite to configure the device.
- Termite can be downloaded at http://www.compuphase.com/software_termite.htm
- Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port.
- Follow the setting accordingly
Network Layout
File:Wifi remote i2c topology.png
