Difference between revisions of "Wifi Remote I2c"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
* USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here] | * USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here] | ||
* Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device. | * Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device. | ||
=== Setting Configuration === | |||
[[File:Wr_Termite2.JPG|thumb]] | |||
* For windows system, you can use terminal emulator program Termite to configure the device. | |||
* Termite can be downloaded at http://www.compuphase.com/software_termite.htm | |||
* Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port. | |||
* Follow the setting accordingly | |||
== Network Layout == | == Network Layout == | ||
Revision as of 03:42, 14 May 2016
Quick Start Guide
Hardware Setup
- Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
- USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
- Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.
Setting Configuration
- For windows system, you can use terminal emulator program Termite to configure the device.
- Termite can be downloaded at http://www.compuphase.com/software_termite.htm
- Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port.
- Follow the setting accordingly
Network Layout
File:Wifi remote i2c topology.png
