Difference between revisions of "PineTab2 Releases"
Jump to navigation
Jump to search
(→Mobian: Mobian requires flashing u-boot to the SPI, and we now have installer images) |
(→Mobian: Link to SPI flash instructions, and Mobian flashing instructions) |
||
| Line 34: | Line 34: | ||
The current version of the base Debian system is Debian Bookworm. | The current version of the base Debian system is Debian Bookworm. | ||
The [https://wiki.mobian-project.org/doku.php?id=install-linux installation instructions] are the same for the PineTab2 as they are for Mobian's other supported devices. | |||
Download: | Download: | ||
| Line 41: | Line 43: | ||
{{Info|U-Boot is required to be able to boot the images, see [https://github.com/Kwiboo/u-boot-build here]! | {{Info|U-Boot is required to be able to boot the images, see [https://github.com/Kwiboo/u-boot-build here]! | ||
Follow the [https://github.com/Kwiboo/u-boot-build# | Follow the [https://github.com/Kwiboo/u-boot-build#spi-flash instructions] to flash [https://github.com/Kwiboo/u-boot-build/suites/13552260933/artifacts/745702098 U-Boot for the PineTab2 (you need a GitHub account to download it)] to the SPI of your PineTab2. | ||
If you do not flash U-Boot to the SPI of your PineTab2, Mobian images will not boot on it.}} | If you do not flash U-Boot to the SPI of your PineTab2, Mobian images will not boot on it.}} | ||
Revision as of 15:23, 21 June 2023
This page contains a list of all available releases and tools for the PineTab2 in alphabetical order.
The installation instructions can be found under PineTab2#Installation instructions.
Linux
Arch Linux ARM
(Unofficial) Arch Linux ARM maintained by the DanctNIX community (GitHub: danctnix, dreemurrs-embedded). This includes uboot.
Download:
| Default credentials | |
|---|---|
| Default user | alarm/123456
|
Notes:
- Currently ships without a Wi-Fi and Bluetooth driver
- system hangs on reboot/shutdown (SDDM bug, workaround possible)
- screen rotated 90°, workaround possible
Mobian
An unofficial Debian build for ARM64 running with Phosh.
The current version of the base Debian system is Debian Bookworm.
The installation instructions are the same for the PineTab2 as they are for Mobian's other supported devices.
Download:
Note: U-Boot is required to be able to boot the images, see here!
Follow the instructions to flash U-Boot for the PineTab2 (you need a GitHub account to download it) to the SPI of your PineTab2.
If you do not flash U-Boot to the SPI of your PineTab2, Mobian images will not boot on it.| Default credentials | |
|---|---|
| Default user | mobian/1234
|
Notes:
- The development is work in progress. Mobian's support for the PineTab2 is maintained by Julian. The Mobian wiki can be found here.
- In order to connect to the device using SSH/SCP, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP using the PineTab2's IP address on port 22.
- When installing Mobian with full disk encryption and booting with the keyboard case connected, you will have to touch the screen or press a key to show the decryption screen. This is an upstream issue.