Difference between revisions of "PineNote Development/Software Tweaks"
Aarondabomb (talk | contribs) |
(Add information on libinput) |
||
| Line 17: | Line 17: | ||
This will improve BT audio quality at least when using the AAC codec. In my experience, the quality is more than acceptable, but there are still issues apparent: occasional isolated stutters even on AAC; prohibitively frequent stutters on SBC-XQ remain. Fully resolving BT audio issues might require further changes similar to the one described above, or may alternatively be a matter of audio software settings (e. g., process priority, audio server buffer settings). Investigation ongoing. | This will improve BT audio quality at least when using the AAC codec. In my experience, the quality is more than acceptable, but there are still issues apparent: occasional isolated stutters even on AAC; prohibitively frequent stutters on SBC-XQ remain. Fully resolving BT audio issues might require further changes similar to the one described above, or may alternatively be a matter of audio software settings (e. g., process priority, audio server buffer settings). Investigation ongoing. | ||
== libinput Palm Detection == | |||
See https://gitlab.com/hrdl/pinenote-shared/-/blob/main/etc/libinput/local-overrides.quirks. | |||
== libinput Touch Arbitration == | |||
Prerequisites: setup touch arbitration via udev: https://gitlab.com/hrdl/pinenote-shared/-/blob/main/etc/udev/rules.d/81-libinput-pinenote.rules | |||
=== Issues and workarounds === | |||
* No resolution reported by touchscreen driver. Workaround: patch <code>cyttsp5.c</code> and device tree: https://gitlab.com/hrdl/linux/-/commit/f1f9eb197d3bd88c9189ab9d8fba2d03d2e13960 | |||
** Remaining issues: the resolution is integer-valued. Due to rounding errors this leads to a reported touchscreen size of 233x155mm instead of the configured 210x157mm. | |||
** TODO: check whether rotation of the touchscreen and tablet also rotate libinput's coordinate system so the rectangle used for touch arbitration is rotated correctly. | |||
* Alternatively, patch libinput to use <code>ARBITRATION_IGNORE_ALL</code> instead of <code>ARBITRATION_IGNORE_RECT</code>: https://gitlab.com/hrdl/pinenote-shared/-/blob/main/patches/libinput/0001-Make-touch-screen-arbitration-position-independent.patch | |||
[[Category:PineNote]] | [[Category:PineNote]] | ||
Revision as of 21:04, 29 January 2023
Fixing Bluetooth
Some users have noticed instability with their wireless driver. Upgrading the driver to the version provided by LibreELEC may help! To do this, download the BCM4345C0.hcd, brcmfmac43455-sdio.bin, and brcmfmac43455-sdio.txt from the libreELEC repositories and place them in the same location as your previous firmware (`/lib/firmware/brmc/`). Then rename brcmfmac43455-sdio.{txt,bin} as `brcmfmac43455-sdio.pine64,pinenote-v1.2.{txt,bin}`. If this doesn't help, ask about it in the matrix chat!
Preliminary fix for stuttering bluetooth audio
Following a fix used for the Quartz Model A (which uses the same SoC as the Pinenote), we can modify the device tree prior to building the kernel to try to mitigate poor Bluetooth audio streaming. (reference: see https://lore.kernel.org/linux-arm-kernel/20220926055435.31284-1-leo@nabam.net/T/)
Steps:
- Open
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi - Go to line 939, "bluetooth", under the "uart1" section
- Edit the two lines that read "device-wake-gpios" and "host-wake-gpios"; you want them to read "device-wakeup-gpios" and "host-wakeup-gpios" respectively
- Add the following line to the end of the bluetooth section (under the vddio-supply line in my .dtsi): "max-speed = <3000000>;"
- Count your zeros, don't forget your punctuation..
Caveats:
This will improve BT audio quality at least when using the AAC codec. In my experience, the quality is more than acceptable, but there are still issues apparent: occasional isolated stutters even on AAC; prohibitively frequent stutters on SBC-XQ remain. Fully resolving BT audio issues might require further changes similar to the one described above, or may alternatively be a matter of audio software settings (e. g., process priority, audio server buffer settings). Investigation ongoing.
libinput Palm Detection
See https://gitlab.com/hrdl/pinenote-shared/-/blob/main/etc/libinput/local-overrides.quirks.
libinput Touch Arbitration
Prerequisites: setup touch arbitration via udev: https://gitlab.com/hrdl/pinenote-shared/-/blob/main/etc/udev/rules.d/81-libinput-pinenote.rules
Issues and workarounds
- No resolution reported by touchscreen driver. Workaround: patch
cyttsp5.cand device tree: https://gitlab.com/hrdl/linux/-/commit/f1f9eb197d3bd88c9189ab9d8fba2d03d2e13960- Remaining issues: the resolution is integer-valued. Due to rounding errors this leads to a reported touchscreen size of 233x155mm instead of the configured 210x157mm.
- TODO: check whether rotation of the touchscreen and tablet also rotate libinput's coordinate system so the rectangle used for touch arbitration is rotated correctly.
- Alternatively, patch libinput to use
ARBITRATION_IGNORE_ALLinstead ofARBITRATION_IGNORE_RECT: https://gitlab.com/hrdl/pinenote-shared/-/blob/main/patches/libinput/0001-Make-touch-screen-arbitration-position-independent.patch