Difference between revisions of "PineTab"

From PINE64
Jump to navigation Jump to search
(→‎Operating Systems: Split PineTab releases off from PineTab page)
 
(64 intermediate revisions by 18 users not shown)
Line 1: Line 1:
{{warning|1=IMPORTANT INFORMATION for '''Early Adopters''' - please [[PineTab/Early-Adopter|'''CLICK HERE''']] - some '''known issues''' are listed there}}
[[File:Pinetab.jpg|400px|thumb|right|The PineTab]]


The PineTab is a 10" tablet created by Pine64.
The '''PineTab''' is a 10" tablet created by PINE64. The PineTab is similar in both form, function and underlying ARM64 architecture to the original 11.6″ Pinebook. It is powered by the same quad-core ARM Cortex A53 64-Bit Processor used in our popular PINE A64 Single Board Computer. The optional keyboard and trackpad – which doubles-up as a screen cover – effectively converts the PineTab into a petite on-the-go laptop with a touch screen functionality. It runs numerous mainline Linux distributions as well as *BSD and Android. 
 
Superseded by [[PineTab2]].
== Revisions ==
 
* Developer Edition - development version sent to roughly 100 developers. Close to the Early Adopter Edition, but with a different display panel
* [[PineTab/Early-Adopter|Early Adopter Edition]] - the first hardware revision of the PineTab
 
[[File:PineTabBoard.jpeg|400px|thumb|right|The insides of the PineTab]]
 
[[File:PineTab_Board.jpg|thumb|right|Pinetab Board]]


== Specifications ==
== Specifications ==
Line 17: Line 27:
* '''RAM:''' 2GB LPDDR3
* '''RAM:''' 2GB LPDDR3
* '''I/O:''' HD Video Out (Mini HDMI), Micro USB 2.0 OTG, USB 2.0 A host, 3.5mm Headphone/Mic combo,
* '''I/O:''' HD Video Out (Mini HDMI), Micro USB 2.0 OTG, USB 2.0 A host, 3.5mm Headphone/Mic combo,
* '''Network'''
* '''Network:'''
** WiFi (802.11b/g/n, 2.4GHz only)
** WiFi (802.11b/g/n, 2.4GHz only)
** Bluetooth 2.1
** Bluetooth 2.1
** M.2 LTE / Cell MODEM card, (optional, and takes place of optional M.2 SSD)
** M.2 LTE / Cell MODEM card, (optional, and takes place of optional M.2 SSD)
* '''Screen:''' 10.1" IPS 800x1280 Capacitive LCD
* '''Display:'''
** '''Size:''' 10.1 inches (257mm) diagonal
** '''Type:''' HD IPS capacitive touchscreen, 16M colors
** '''Resolution:''' 1280x800, 16:10 ratio <br>
* '''Attachments/Accessories:''' Magnetically attached keyboard (optional)
* '''Attachments/Accessories:''' Magnetically attached keyboard (optional)
* '''Battery:''' 6000MAh (6Ah)
* '''Battery:''' 6000MAh (6Ah)
* '''Misc. features:'''  
* '''Misc. features:'''  
** Volume rocker and home button
** Volume rocker
** Speakers and Microphone
** Speakers and Microphone
** 2.5mm OD 0.7mm ID DC Jack Power (5V 2A) Port
** 2.5mm OD 0.7mm ID DC Jack Power (5V 2A) Port
Line 32: Line 45:
'''Overview:''' The PineTab detachable keyboard features a full function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use.
'''Overview:''' The PineTab detachable keyboard features a full function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use.


'''FN keys:''': Pause/play (F2), Stop (F3), Previous(F4), Next(F5), Music (F6), Mail (F7), Home (F8), Mute (F9), Vol- (F10), Vol+ (F11), Disable touchpad (F12), NumLock (Insert), Scroll Lock (Delete), PgUp (Up Arrow), PgDn (Down Arrow), Home (Left Arrow), End (Right Arrow), Digital Numpad (7,8,9,0,U,I,O,P,J,K,L,;,M,.,/)
'''FN keys:''' Pause/play (F2), Stop (F3), Previous(F4), Next(F5), Music (F6), Mail (F7), Home (F8), Mute (F9), Vol- (F10), Vol+ (F11), Disable touchpad (F12), NumLock (Insert), Scroll Lock (Delete), PgUp (Up Arrow), PgDn (Down Arrow), Home (Left Arrow), End (Right Arrow), Digital Numpad (7,8,9,0,U,I,O,P,J,K,L,;,M,.,/)


==Versions==
== Operating Systems ==
For now there is only one version, also mentioned in the manual leaflet in the box.
The PineTab will automatically boot from microSD if a bootable card is inserted. Although it is technically possible to use any ARM distro (because the PineTab uses the mainline kernel), only few of them will actually be usable on Early Adopters PineTab, due to specifics of working with LCD panel.
* [[PineTab/Early-Adopter]]


[[File:PineTabBoard.jpeg|400px|thumb|right|The insides of the PineTab]]
Since most software issues will be release-specific, please see the [[PineTab Releases]] page for additional software related instructions, tips, and tricks.


== PineTab board information, schematics and certifications ==
=== Releases ===
* PineTab mainboard schematic:
** [http://files.pine64.org/doc/PineTab/PineTab%20Schematic%20v1.2-20191125.pdf PineTab mainboard Released Schematic ver 1.2]
** [http://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-top.pdf PineTab mainboard component placement ver 1.2 - Top View]
** [http://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-bottom.pdf PineTab mainboard component placement ver 1.2 - Bottom View]
* PineTab certifications:
** [http://files.pine64.org/doc/cert/PineTab%20FCC-SDOC%20Certificate-S20060600404001.pdf PineTab FCC Certificate]
** [http://files.pine64.org/doc/cert/PineTab%20CE-RED%20Certificate-S20060600403.pdf PineTab CE RED Certificate]
** [http://files.pine64.org/doc/cert/PINETAB%20ROHS%20TEST%20REPORT.pdf PineTab ROHS Test Report]


== Datasheets for components and peripherals ==
The releases for the PineTab can be found under [[PineTab Releases]].
* Allwinner A64 SoC information:
** [http://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf Allwinner A64 SoC brief introduction]
** [http://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)]
** [http://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf Allwinner A64 SoC User Manual V1.0 (Official Release Version)]


* X-Powers AXP803 PMU (Power Management Unit) information:
== Installation instructions ==
** [http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf AXP803 PMIC datasheet]
For instructions on how to install the operating systems to the eMMC or microSD card see [[PinePhone Installation Instructions]]. The information is almost the same for the PineTab, as it is a very similar device. Do not try to use the PinePhone images though, use the PineTab images linked above.


* LPDDR3 (178 Balls) SDRAM:
For details see the [[Getting started]] article.
** [http://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf Artmem LPDDR3 datasheet]


* eMMC information:
== Tips and tricks ==
** [http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
** [http://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
** [http://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
** [http://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf 64GB SanDisk eMMC Datasheet]


* CMOS camera module information:
=== Reset ===
** [http://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet]
** [http://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet]


* LCD touch screen panel information:
If your PineTab is in unknown state or doesn't want to start: Press power button for 7-8s. It makes a sound and you know it's totally off. 3 seconds after, power button  again for 2-3s and it will start to boot.
** [http://files.pine64.org/doc/datasheet/pinetab/GT9271.pdf GOODiX GT9271 Capacitive Touch Controller datasheet]
** [http://files.pine64.org/doc/datasheet/pinetab/GT9271_Config_20200818_142030_V66.cfg PineTab GT9271 Capacitive Touch Controller configuration file]


* Lithium battery information:
=== Power Off While Charging ===


When plugging your Pinetab into a charger, it automatically powers on. Use the above "Reset" instruction (holding the power button in for several seconds) to turn it off. This will allow your Pinetab to charge without being powered on.


* WiFi/BT module information:
=== Display rotated 90° on Arch ARM ===
** [http://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf RTL8723BS/RTL8723CS specification]
With the following command you can turn the display to landscape:


echo 1 | sudo tee /sys/class/graphics/fbcon/rotate


== Operating Systems ==
This command does not persist a reboot.
The PineTab will automatically boot from microSD if a bootable card is inserted. Although it is technically possible to use any ARM distro (because the PineTab uses the mainline kernel), only few of them will actually be usable on Early Adopters PineTab, due to specifics of working with LCD panel. Among those listed all except for postmarketOS have working builds.


=== UBPorts ===
== Assembly and disassembly ==
[[File:Ubports-logo.png|100px]]
The UBPorts Ubuntu Touch is what preinstalled on PineTab Early Adopters batch.


It can update itself, and also jenkins daily build can be downloaded [https://ci.ubports.com/job/rootfs/job/rootfs-pinetab/ here]
Be very careful here. It is not a 'pop off' cover design.
Special care should be directed to AVOID anything that may appear to cause a "bend" in screen.  


In the event that WiFi fails to connect, the USB port can be used with an appropriate dongle to connect for internet using ethernet cable.
Gently use fingernails (or if you have one, plastic pry), starting in the very middle location for each side (saving keyboard connector latch over area (bottom side) for the very last removal step).


=== postmarketOS ===
Work your way from the inner middle on each side, slowly. Slide gently towards the direction of each corner (saving the lifting of actual corners themselves for the second to last step)). Careful not to break thin speaker wires that line the outside of the inner case.
[[File:PostmarketOS-logo.png|100px]]
postmarketOS is a preconfigured version of [https://www.alpinelinux.org/ Alpine Linux] for mobile devices.


The latest builds can be downloaded from the [https://images.postmarketos.org/pinetab/ images page] to be flashed to the PineTab.
The very last opening piece should be the "latch over" (where the keyboard pins connect).


More information is available at [https://postmarketos.org postmarketos.org] and on their [https://wiki.postmarketos.org/wiki/PINE64_PineTab_(pine64-pinetab) dedicated PineTab wiki page].
KEEP IN MIND: The main key here is to avoid any potential "bend" of the screen. We save the corners until after working on the middle of each side to reduce pressure on the screen.


=== Arch Linux ARM ===
Do not force anything. If it is not coming off with gentle effort, you are likely doing something wrong (try another side middle).
[[File:Archlinux-logo.png|100px]]
Arch Linux ARM with Phosh as the UI selection, maintained by the DanctNIX community.  


The latest image can be downloaded [https://github.com/dreemurrs-embedded/Pine64-Arch/releases here]
== Board information, schematics and certifications ==


=== Manjaro ARM ===
PineTab mainboard schematic:
[[File:Manjaro-logo.svg|100px]]
* [https://files.pine64.org/doc/PineTab/PineTab%20Schematic%20v1.2-20191125.pdf PineTab mainboard Released Schematic ver 1.2]
Th first Manjaro ARM image confirmed to be working on Early Adopters PineTab can be downloaded [https://next.manjaro.org/index.php/s/aeXDtbWnnBNEM2Q here], ref [https://forum.manjaro.org/t/manjaro-arm-alpha2-with-phosh-pinetab/150/12 forum thread].
* [https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-top.pdf PineTab mainboard component placement ver 1.2 - Top View]
* [https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-bottom.pdf PineTab mainboard component placement ver 1.2 - Bottom View]


Older Manjaro images with several different environments, including Phosh and Plasma, but '''not working on Early Adopters PineTab''' can be downloaded [https://osdn.net/projects/manjaro-arm/storage/pinetab/ here]
PineTab keyboard schematic:
* PineTab keyboard and Pinebook (Pro) keyboard using same controller and from same engineering source
* [https://files.pine64.org/doc/PineTab/Pinetab%20HB092A%20Keyboard%20Schematic.pdf PineTab Keyboard Schematic]
* [https://files.pine64.org/doc/PineTab/HB092_0884232458_Hynitron_PTP_20200514_662905_Linux_US_BackLight_CRC_175057F5.hex PineTab keyboard firmware code]
* [https://files.pine64.org/doc/PineTab/SH68F83V2.0.pdf PineTab Keyboard Controller Datasheet]


=== Mobian ===
PineTab certifications:
[[File:Debian-logo.png|100px]]
* [https://files.pine64.org/doc/cert/PineTab%20FCC-SDOC%20Certificate-S20060600404001.pdf PineTab FCC Certificate]
Mobian is a project providing Debian images for mobile devices.  
* [https://files.pine64.org/doc/cert/PineTab%20CE-RED%20Certificate-S20060600403.pdf PineTab CE RED Certificate]
* [https://files.pine64.org/doc/cert/PINETAB%20ROHS%20TEST%20REPORT.pdf PineTab ROHS Test Report]


PineTab images can be downloaded [https://images.mobian-project.org/pinetab/ here]. Password is '''1234'''
== Datasheets for components and peripherals ==
Allwinner A64 SoC information:
* [https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf Allwinner A64 SoC brief introduction]
* [https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)]
* [https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf Allwinner A64 SoC User Manual V1.0 (Official Release Version)]


== Installation instructions ==
X-Powers AXP803 PMU (Power Management Unit) information:
For instructions on how to install the operating systems to the eMMC or microSD card see [[PinePhone Installation Instructions]]. The information is almost the same for the PineTab, as it is a very similar device. Do not try to use the PinePhone images though, use the PineTab images linked above.
* [https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf AXP803 PMIC datasheet]


=== Testing ===
LPDDR3 (178 Balls) SDRAM:
To test an OS, just flash its image onto an microSD card, plug it into PineTab, and reboot.
* [https://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf Artmem LPDDR3 datasheet]
Note that USB stick won't work.
Also note that you need to "flash", not just copy the file onto the card.
Also remember that you need to unpack image file if it's packed!


You can do it using Ubuntu Touch installed on the PineTab! For now, only Mobian is supported by the guide below.
eMMC information:
* [https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
* [https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
* [https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
* [https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf 64GB SanDisk eMMC Datasheet]


* First, make sure you have enough free disk space and empty Downloads directory on the PineTab (while not strictly necessary, empty Downloads dir will simplify your typing. You can just move all files from there to another directory).
CMOS camera module information:
* go to the Mobian link above and download compressed image (the one ending with .img.gz) - usual recommendation is to download latest, i.e. lowest one.
* [https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet]
* Open terminal and type this in it:
* [https://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet]
  cd Downloads
  ls
* It should show you the name of the file you've just downloaded
* This file is compressed, so first you need to uncompress it. Type this into terminal:
  gunzip *.gz && echo done
* This command will take some time (you won't see any progress until it's done). It either will succeed (and print "done") and fail (and print why).
* Now, let's have a look at disks. Type this into terminal:
  lsblk
* It should show you a tree of disks and their partitions. If you don't have microCD card inserted yet, all of them begin with mmcblk2. Also, some of them have something in the "MOUNTPOINT" column
* Insert microSD card into PineTab. Note that all information on it will be deleted, so don't insert one with valuable information on it!
* type `lsblk` into terminal again.
* Note that now tree of disks has one or more new entries - starting with mmcblk0 - that's partitions of your microSD card.
* Confirm that size of mmcblk0 is close to size of the microSD card, and all lines starting with mmcblk0 have empty "MOUNTPOINT" column.
* now type this:
  sudo dd if=`ls` of=/dev/mmcblk0 bs=1M status=progress
* It will take some time, depending on speed of your microSD card and size of image file
* Now, reboot your PineTab - type this into terminal:
  sudo reboot
* PineTab should boot from the microSD you've just flashed


== Tips and tricks ==
LCD touch screen panel information:
* [https://files.pine64.org/doc/datasheet/pinetab/GT9271.pdf GOODiX GT9271 Capacitive Touch Controller datasheet]
* [https://files.pine64.org/doc/datasheet/pinetab/GT9271_Config_20200818_142030_V66.cfg PineTab GT9271 Capacitive Touch Controller configuration file]


=== Reset ===
Lithium battery information:
 
* N/A
If your PineTab is in unknown state or doesn't want to start.
Press power button for 7-8s. It makes a sound and you know it's totally off. 3 seconds after, power button  again for 2-3s and it will start to boot. - thanks
@Aperricio on IRC for this hint
 
=== Display rotated 90° on Arch ARM ===
With the following command you can turn the display to landscape:


* echo 1 | sudo tee /sys/class/graphics/fbcon/rotate
WiFi/BT module information:
* [https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf RTL8723BS/RTL8723CS specification]


This command does not persist a reboot.
== External Links ==
* [https://pine64.com/product/pinetab-10-1-linux-tablet/ The PineTab on the Pine64 store]
* [https://forum.pine64.org/forumdisplay.php?fid=140 The PineTab section of the Pine64 forums]
* [https://forum.pine64.org/showthread.php?tid=11401 Comments on back cover removal on forums]
* [https://forum.pine64.org/showthread.php?tid=13118 Demonstration Video: Pinetab back cover removal on forums]


[[Category:PineTab]] [[Category:Allwinner A64]]
[[Category:PineTab]] [[Category:Allwinner A64]]

Latest revision as of 09:50, 9 December 2023

The PineTab

The PineTab is a 10" tablet created by PINE64. The PineTab is similar in both form, function and underlying ARM64 architecture to the original 11.6″ Pinebook. It is powered by the same quad-core ARM Cortex A53 64-Bit Processor used in our popular PINE A64 Single Board Computer. The optional keyboard and trackpad – which doubles-up as a screen cover – effectively converts the PineTab into a petite on-the-go laptop with a touch screen functionality. It runs numerous mainline Linux distributions as well as *BSD and Android. 

Superseded by PineTab2.

Revisions

  • Developer Edition - development version sent to roughly 100 developers. Close to the Early Adopter Edition, but with a different display panel
  • Early Adopter Edition - the first hardware revision of the PineTab
The insides of the PineTab
Pinetab Board

Specifications

  • Dimensions: 11mm x 175mm x 260mm (Thickness, Width, Height)
  • Weight: 575g (Tablet alone)
  • Build: Plastic
  • Storage:
    • 64GB of internal eMMC storage
    • MicroSD slot, bootable
    • M.2 SSD slot, supports SATA and USB devices only, not NVME (optional)
  • Cameras: 2Mpx Front, 5Mpx Rear
  • SOC: Allwinner A64 Quad Core
  • CPU: 4x ARM A53 1.152GHz
  • GPU: Mali 400 MP2
  • RAM: 2GB LPDDR3
  • I/O: HD Video Out (Mini HDMI), Micro USB 2.0 OTG, USB 2.0 A host, 3.5mm Headphone/Mic combo,
  • Network:
    • WiFi (802.11b/g/n, 2.4GHz only)
    • Bluetooth 2.1
    • M.2 LTE / Cell MODEM card, (optional, and takes place of optional M.2 SSD)
  • Display:
    • Size: 10.1 inches (257mm) diagonal
    • Type: HD IPS capacitive touchscreen, 16M colors
    • Resolution: 1280x800, 16:10 ratio
  • Attachments/Accessories: Magnetically attached keyboard (optional)
  • Battery: 6000MAh (6Ah)
  • Misc. features:
    • Volume rocker
    • Speakers and Microphone
    • 2.5mm OD 0.7mm ID DC Jack Power (5V 2A) Port

Keyboard

Overview: The PineTab detachable keyboard features a full function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use.

FN keys: Pause/play (F2), Stop (F3), Previous(F4), Next(F5), Music (F6), Mail (F7), Home (F8), Mute (F9), Vol- (F10), Vol+ (F11), Disable touchpad (F12), NumLock (Insert), Scroll Lock (Delete), PgUp (Up Arrow), PgDn (Down Arrow), Home (Left Arrow), End (Right Arrow), Digital Numpad (7,8,9,0,U,I,O,P,J,K,L,;,M,.,/)

Operating Systems

The PineTab will automatically boot from microSD if a bootable card is inserted. Although it is technically possible to use any ARM distro (because the PineTab uses the mainline kernel), only few of them will actually be usable on Early Adopters PineTab, due to specifics of working with LCD panel.

Since most software issues will be release-specific, please see the PineTab Releases page for additional software related instructions, tips, and tricks.

Releases

The releases for the PineTab can be found under PineTab Releases.

Installation instructions

For instructions on how to install the operating systems to the eMMC or microSD card see PinePhone Installation Instructions. The information is almost the same for the PineTab, as it is a very similar device. Do not try to use the PinePhone images though, use the PineTab images linked above.

For details see the Getting started article.

Tips and tricks

Reset

If your PineTab is in unknown state or doesn't want to start: Press power button for 7-8s. It makes a sound and you know it's totally off. 3 seconds after, power button again for 2-3s and it will start to boot.

Power Off While Charging

When plugging your Pinetab into a charger, it automatically powers on. Use the above "Reset" instruction (holding the power button in for several seconds) to turn it off. This will allow your Pinetab to charge without being powered on.

Display rotated 90° on Arch ARM

With the following command you can turn the display to landscape: 

echo 1 | sudo tee /sys/class/graphics/fbcon/rotate

This command does not persist a reboot.

Assembly and disassembly

Be very careful here. It is not a 'pop off' cover design. Special care should be directed to AVOID anything that may appear to cause a "bend" in screen.

Gently use fingernails (or if you have one, plastic pry), starting in the very middle location for each side (saving keyboard connector latch over area (bottom side) for the very last removal step).

Work your way from the inner middle on each side, slowly. Slide gently towards the direction of each corner (saving the lifting of actual corners themselves for the second to last step)). Careful not to break thin speaker wires that line the outside of the inner case.

The very last opening piece should be the "latch over" (where the keyboard pins connect).

KEEP IN MIND: The main key here is to avoid any potential "bend" of the screen. We save the corners until after working on the middle of each side to reduce pressure on the screen.

Do not force anything. If it is not coming off with gentle effort, you are likely doing something wrong (try another side middle).

Board information, schematics and certifications

PineTab mainboard schematic:

PineTab keyboard schematic:

PineTab certifications:

Datasheets for components and peripherals

Allwinner A64 SoC information:

X-Powers AXP803 PMU (Power Management Unit) information:

LPDDR3 (178 Balls) SDRAM:

eMMC information:

CMOS camera module information:

LCD touch screen panel information:

Lithium battery information:

  • N/A

WiFi/BT module information:

External Links

Retrieved from "https://wiki.pine64.org/index.php?title=PineTab&oldid=21166"