Difference between revisions of "PinePhone Hardware Issues"
(added to pinephone category) |
(→USB-C Side Board: My new USB-C side board seems to behave identically to my old one: mic is fine is U101 shimmed; USB-C connection is fine; vibra is inactive independently in tow-boot and with fftest/Mobian/trixie; the speaker seems to be inactive) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Under construction}} | {{Under construction}} | ||
== Main Board == | == Main Board == | ||
| Line 13: | Line 11: | ||
== USB-C Side Board== | == USB-C Side Board== | ||
All USB-C Side Board issues can be fixed by replacing the [https://pine64.com/product/pinephone-usb-c-side-board/ USB-C Side Board] | All USB-C Side Board issues can, in principle, be fixed by replacing the [https://pine64.com/product/pinephone-usb-c-side-board/ USB-C Side Board] | ||
=== Internal Microphone === | === Internal Microphone === | ||
| Line 29: | Line 27: | ||
Place new issues here. | Place new issues here. | ||
= See Also = | == See Also == | ||
* [[PinePhone#Modifications_and_repairs]] | * [[PinePhone#Modifications_and_repairs]] | ||
Latest revision as of 20:06, 19 November 2024
Please help to review and edit this page or section. Information are subject to change.
Main Board
Sim Reader
The sim reader may fail to read a sim card (reporting 'sim-missing' in mmcli), possibly due to deformed pins (if you put your sim adapter in without a sim), or due to a warped sim card adapter.
A possible solution is to bend the pins back (using a plastic spudger), and/or use a different sim card adapter (which your carrier may provide to you).
USB-C Side Board
All USB-C Side Board issues can, in principle, be fixed by replacing the USB-C Side Board
Internal Microphone
The microphone may stop working or occasionally stop working or give off static when power is plugged in.
One possible fix is to shim U101 (as seen on the back side of the USB-C Side Board) with a piece of paper or cardboard.
Bottom Speaker
The bottom speaker may stop working, especially if you have recently mishandled the USB-C Side Board, stressing the point of connection between the circuit board and the circuit flex. This can be fixed by touching up the solder between the two.
Uncategorized Issues
Place new issues here.