Difference between revisions of "PineTime"
Jump to navigation
Jump to search
| Line 75: | Line 75: | ||
== PineTime DevKit SWD Probe == | == PineTime DevKit SWD Probe == | ||
* PineTime SWD probe pin defination: | * PineTime SWD probe pin defination: | ||
[[File: | [[File:PineTime_SWD_location.jpg]] | ||
* PineTime SWD probe usage method: | * PineTime SWD probe usage method: | ||
* Note: The color code on the PineTime's SWD probe is random color. | * Note: The color code on the PineTime's SWD probe is random color. | ||
* Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit. | * Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit. | ||
[[File: | [[File:SWD_Plugin.jpg]] | ||
Revision as of 01:55, 21 October 2019
PINE64 SmartWatch "PineTime"
The PINE64 SmartWatch, dubbed "PineTime", is a product of a community effort for an open source smartwatch in collaboration with wearable RTOS and Linux app developers/communities.
PineTime development has been broken down into two distinct phases:
- Phase One - PineTime Dev Kit Project on October 2019
- Phase Two - Introducing the PineTime smartwatch around Q1 2020, depending on development results in Phase 1.
PineTime Concept Photo
PineTime Case and Charging Cradle Photos
PineTime DevKit internal Photos
Watch Information
- LAUNCH:
- Announced: Tweet on 13 September 2019
- Devkit Release: October, 2019
- Expected Release: Q1/Q2 2020, pending on development result
- Availability: at least 5 years
- BODY:
- Dimensions: 37.5mm x 40mm x 11mm
- Weight: 38 grams
- Build: Zinc Alloy and Plastic
- Environmental Rating: IP67 (waterproof to 1 meter of immersion; not applicable to devkits)
- DISPLAY:
- Type: IPS capacitive touchscreen, RGB 65K colors
- Size: 1.3 inches
- Resolution: 240x240 pixels, 1:1 ratio
- PLATFORM:
- OS: Various open source RTOS such as Zephyr, FreeRTOS, Mbed, Mynewt, or NuttX
- SoC: NORDIC Semiconductor nRF52832 (final product may use nRF52840)
- CPU: 64MHz ARM Cortex-M4F
- MEMORY:
- Internal: 512KB Flash, 64KB RAM (nRF52840: 1 MB flash, 256KB RAM)
- Additional: SPI NOR 8MB Flash
- COMMUNICATION:
- Bluetooth 5 (including Low Energy)
- FEATURES:
- Sensors: Accelerometer, PPG Heart Rate Sensor
- Actuator: Vibrator
- BATTERY:
- Built-in LiPo 170-180mAh battery
- Charging: Proprietary 2pin 5V 500mA, USB type A plug
- PRICE:
- USD $22.99 (PineTime pebble and charging cradle, based on phone on PineTime devkit hardware configuration)
- USD $2 and up (20mm straight generic wrist band: silicone, NATO, Milanese steel, leather, and etc)
PineTime Schematic and Certifications
- PineTime Main Board Schematic:
- PineTime Certifications:
- not yet available
PineTime DevKit SWD Probe
- PineTime SWD probe pin defination:
- PineTime SWD probe usage method:
- Note: The color code on the PineTime's SWD probe is random color.
- Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit.
Datasheets for Components
- NORDIC SoC information:
- PMU (Power Management Unit) information:
- SPI Flash information:
- LCD Panel:
- Touchpad information:
- Sensor:
