Difference between revisions of "PINE A64 Software Releases"

From PINE64
Jump to navigation Jump to search
Line 78: Line 78:
** password: dietpi
** password: dietpi
* '''To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/'''
* '''To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/'''
== motionEyeOS ==
http://files.pine64.org/sw/pine64_installer/json/motioneyeos.png
=== motionEyeOS [20190413] ===
* motionEyeOS is a Linux distribution that turns a single-board computer into a video surveillance system. The OS is based on BuildRoot and uses motion as a backend and motionEye for the frontend
* Visit the [https://github.com/ccrisan/motioneyeos/releases/ motionEyeOS GitHub] and its [https://github.com/ccrisan/motioneyeos/wiki GitHub Wiki] for more information
* Suitable for 1GB/2GB PINE A64(+) variants
* DD image (for 8GB micoSD card and above)
** [https://github.com/ccrisan/motioneyeos/releases/latest Direct download from GitHub]
* Login with
** Username: admin
** Password:
* There are 2 ways to interact with the OS:
** Scan for its IP with hostname MEYE-* and go to the admin web interface http://[PINE A64(+) motionEyeOS IP Address] and after login, you should able to see the output of the CAMERA MODULE on the web interface
** Use the PINE64 USB SERIAL CONSOLE/PROGRAMMER and login




Line 398: Line 418:
* You may also change the default IP Address (192.168.0.2) and Gateway (192.168.0.1) in /etc/network/interfaces to match your Router subnet
* You may also change the default IP Address (192.168.0.2) and Gateway (192.168.0.1) in /etc/network/interfaces to match your Router subnet
* Go to the https://[PINE A64(+) FalconGate IP Address] on your web browser to access to the FalconGate admin web interface
* Go to the https://[PINE A64(+) FalconGate IP Address] on your web browser to access to the FalconGate admin web interface
== motionEyeOS ==
http://files.pine64.org/sw/pine64_installer/json/motioneyeos.png
=== motionEyeOS [20180627] ===
* motionEyeOS is a Linux distribution that turns a single-board computer into a video surveillance system. The OS is based on BuildRoot and uses motion as a backend and motionEye for the frontend
* Visit the [https://github.com/ccrisan/motioneyeos/releases/ motionEyeOS GitHub] and its [https://github.com/ccrisan/motioneyeos/wiki GitHub Wiki] for more information
* Suitable for 1GB/2GB PINE A64(+) variants
* DD image (for 8GB micoSD card and above)
** [https://github.com/ccrisan/motioneyeos/releases/latest Direct download from GitHub]
* Login with
** Username: admin
** Password:
* There are 2 ways to interact with the OS:
** Scan for its IP with hostname MEYE-* and go to the admin web interface http://[PINE A64(+) motionEyeOS IP Address] and after login, you should able to see the output of the CAMERA MODULE on the web interface
** Use the PINE64 USB SERIAL CONSOLE/PROGRAMMER and login




Revision as of 03:39, 16 April 2019

Note that, PINE A64(+) OS images are not compatible with PINE A64-LTS due to LPDDR3 memory configuration. For PINE A64-LTS, please use the 'SOPINE OS images'

BSD Image Releases

NetBSD

netbsd.png

http://www.invisible.ca/arm/

  • PINE64/PINE64+ images are available with daily builds on the link above.
  • Default connection is over HDMI cable and USB keyboard.
  • Default username is "root" without password.
  • Ssh remote login is not enabled by default.


Linux Image Releases

Special thanks to Sunxi community and longsleep for their contributions

Below you will find useful links to various resources and forum threads:


Arch mainline Linux XFCE

archlinux.png

Arch Linux mainline with XFCE GUI by anarsoul

* From SSH Login default disable root to access . So please first login alarm and password alarm and then command su type password root


Armbian

armbian.png

Armbian Community Build Image [microSD Boot] {mainline kernel 4.19.y]


DietPi

dietpi.png

DietPi [v145]

  • DietPi is a lightweight linux distribution of Debian Jessie
  • To find out more about DietPi on the PINE64 and available tweaks to the installation please visit the PINE64 forum thread
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • username: root
    • password: dietpi
  • To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/



motionEyeOS

motioneyeos.png

motionEyeOS [20190413]

  • motionEyeOS is a Linux distribution that turns a single-board computer into a video surveillance system. The OS is based on BuildRoot and uses motion as a backend and motionEye for the frontend
  • Visit the motionEyeOS GitHub and its GitHub Wiki for more information
  • Suitable for 1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: admin
    • Password:
  • There are 2 ways to interact with the OS:
    • Scan for its IP with hostname MEYE-* and go to the admin web interface http://[PINE A64(+) motionEyeOS IP Address] and after login, you should able to see the output of the CAMERA MODULE on the web interface
    • Use the PINE64 USB SERIAL CONSOLE/PROGRAMMER and login


Xenial Mate

mate.png

Xenial Mate [20161215] built by PINE64

  • This is a build including DE based on longsleep works and may not have all the up-to-date features offered by longsleep and Sunxi community. For latest build, you can create one and following this thread.
  • This build optimizes Gigabit Ethernet parameter and improves on GbE connectivity
  • Included Mate Desktop, Firebox Browser, and LibreOffice Suite
  • Included with Wifi and Bluetooth
  • Included library set that provides access to the GPIO headers in Linux as provided by community member KB3VGW (https://devhub.io/repos/kb3vgw-wiringPi-Pine64)
  • Not yet optimize for Graphic and Video HW acceleration
  • Auto execute resize_rootfs.sh script on first boot-up to resize the root partition in order to fully utilize the SD Card
  • Suitable for 1GB/2GB PINE A64+ Board, not advise to run on 512MB PINE A64 Board
  • DD image (for 8GB micoSD card and above):
  • Login with
    • username: ubuntu
    • password: ubuntu


Xenial Base Image

File:Ubuntu-logo32.png

Xenial Base Image [20161218-1] by longsleep

  • This is the latest Xenial 16.04 image provided by lonsleep. NB. This is a base image and doesn't come with a DE
  • longsleep's support thread on PINE64 Forum
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • username: ubuntu
    • password: ubuntu
  • Execute sudo /usr/local/sbin/resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card
  • To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/
  • Install Mate DE using: sudo /usr/local/sbin/install_mate_desktop.sh

Xenial Minimal Image

File:Ubuntu-logo32.png

Xenial Minimal Image [0.6.2-77] by ayufan

  • This is the latest Xenial 16.04 image provided by ayufan based on longsleep base image. NB. This is a base image and doesn't come with a DE
  • Special thanks to ayufan, Icenowy, lennyraposo, longsleep, lukasz, tkaiser, Xalius and PINE64 community contributors
  • ayufan's GitHub
  • Suitable for 1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • username: pine64
    • password: pine64
  • Execute sudo /usr/local/sbin/resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card
  • To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/
  • Install Mate DE using: sudo /usr/local/sbin/install_desktop.sh

openSUSE Base Image

opensuse.png

openSUSE Base Image [20170328]

The image includes a config tool which, among other options, allows users to install a desktop environment: sudo /usr/local/sbin/pine64-config.sh


Debian Jessie Mate

debian.png

Debian Jessie with Mate DE [3.10.102 BSP 2] by Lenny Raposo

  • Lenny's Debian Support thread on PINE64 forum
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above):
  • Login with
    • username: debian
    • password: debian
  • Execute sudo /usr/local/sbin/resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card
  • To update to the newest uboot, kernel and fixes use scripts found in /usr/local/sbin/


Fedora Base Image

fedora.png

Fedora 27 and 28 Image

Please follow this PINE64 forum post for Fedora 27 bring up and update to Fedora 28 on this thread


Gentoo

gentoo.png

Gentoo [20160804]

  • A Gentoo image built by Xalius
  • To learn more about the Gentoo linux build please see the forum thread
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: gentoo
    • Password: gentoo
    • Root Password: gentoo


Q4OS

q4os.png

Q4OS [24-r3]

  • Q4OS is advertised as a 'fast and powerful operating system based on the latest technologies while offering highly productive desktop environment'
  • To learn more please visit the forum or official Q4OS website
  • Suitable for 1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • login with:
    • username: adminq
    • password: adminq


OpenWRT

OpenWrt.png

OpenWRT Community Build Image [microSD Boot]


openHAB 2

openhab.png

openHAB 2 [v1.4]

[OLD] openHAB 2 [v1.3]

  • This image is based on the official Xenial Base Image by longsleep and the openHABian project
  • Suitable for 512MB/1GB/2GB PINE A64(+) Board
  • DD images (for 4GB microSD card and above)
  • Login with
    • username: openhabian
    • password: openhabian
  • Initial boot can take more than 15 minutes for openHABian to initialized. Once initialized, the display will be off. Then reboot the PINE A64(+)
  • Go to http://openhabianpine64:8080 or http://{pine64_ip}:8080/ on your PC web browser. ({pine64_ip} can be obtained by Login to PINE A64(+) and execute "ifconfig")
  • For getting started with openHAB, please refer to http://docs.openhab.org/


China NeoKylin “中标麒麟”

neokylin.png

China NeoKylin “中标麒麟” [20170210]


Volumio Digital Audio Player

volumio.png


Volumio Digital Audio Player [2.383-2018-03-17]

  • This version works with (Spdif / Coaxial / RCA).
  • You need to enable Volume Normalization in the Playback Options to fix sound low.
  • supports a select number of simple I2S DACS.
  • Tested with the Pine64 DAC POT, a wired ES9023 DAC module and a pcm5121 DAC module.
  • Most old PI/PI2+ DACs should work (provided they do not need I2C for control).
  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/

Volumio Digital Audio Player [2.315-2017-11-11]

  • This version works with (Spdif / Coaxial / RCA).
  • You need to enable Volume Normalization in the Playback Options to fix sound low.
  • For listen headphones this version have "hiss"
  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/

Volumio Digital Audio Player [2.312-2017-11-05]

  • This version works with (Spdif / Coaxial / RCA).
  • You need to enable Volume Normalization in the Playback Options to fix sound low.
  • For listen headphones you need to disable Volume Normalization to fix "hiss"
  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/

Volumio Digital Audio Player [2.166-2017-05-11]

  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • You can follow the ongoing discussion about Volumio on the PINE64 forum
  • Suitable for 512MB/1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/


FalconGate

falcongate.png

FalconGate [20170705]

  • FalconGate is an open source smart gateway which can protect your home devices against hackers, Malware like Ransomeware and other threats
  • Visit the FalconGate GitHub and its GitHub Wiki for more information
  • Suitable for 1GB/2GB PINE A64(+) variants
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: admin
    • Password: falcongate
    • Root Password: falcongate
  • Normally there will be around 5 minutes of boot time when you disable DHCP on your router as suggested by FalconGate
  • You may also change the default IP Address (192.168.0.2) and Gateway (192.168.0.1) in /etc/network/interfaces to match your Router subnet
  • Go to the https://[PINE A64(+) FalconGate IP Address] on your web browser to access to the FalconGate admin web interface


OpenMediaVault

omv.png

OpenMediaVault Community Build Image [microSD Boot]


Retroarch

RetroArch-APK-Download.png

Retroarch Community Build Image by pfeerick


Android Image Releases

Android 7.x

android_7.png

Android 7.1 Community Image [v0.3.10-r66]

[OLD] Android 7.0 Community Beta Image [v1.11.0-r67]


Android 6.x

android_6.png

Android 6.0 (HDMI Video Output) [20170112 v2.0.1]


Android 6.0.1 (LCD Panel Video Output) [20170209]


Android 6.0 Community Beta Image [v1.0.0-r19]


Android 5.x

android_5.png

Android 5.1.1 (HDMI Video Output) [20161208 v1.2.8]


[OLD] Android 5.1.1 (HDMI Video Output) [20160711 v1.2.6]


[OLD] Android 5.1.1 (LCD Panel Video Output) [20160603]


Bliss OS

bliss_os.png

Bliss OS [20170919]

  • An Open-Source OS, based on Android, for phones, tablets & PCs
  • Multi-Windows Android Build
  • You can visit the Bliss OS website here
  • This version best suitable for 2GB PINE A64+ Board, can runs on 1GB PINE A64+ Board with performance lagging, not suitable for 512MB PINE A64 Board
  • DD images:
  • Use the Taskbar launcher for Desktop mode UI


Remix OS

[DISCONTINUED]

remix_os.png

Remix OS 2.0 [20170105]


Windows 10 IoT Releases

win10iot.png

Win10 IoT [10.0.15063.0_20170602]

  • 10.0.15063.0_20170602
    • Update Notes since 10.0.15063.0_20170524:
      • Fix the failure of default application installation caused by a app certification issue
      • Fix that the default application cannot start automatically after installation
      • Fix Ethernet initialization problem and now the Ethernet will start successfully every time
      • Enable the usermode access for all unusable GPIO pins in Pi-2 bus( later provide a UWP sample to show how to control these pins )
    • Extra Notes:
  • 10.0.15063.0_20170524
    • Some Updates:
      • Update the OS version to build v.10.0.15063.0 (Creators Update)
      • New page style of Device Portal, visit https://deviceipaddr:8080 to check it
      • Built-in Cortana assistant, need to be enabled in settings page in default app and Device Portal
      • Support on-screen keyboard, need to be enabled in Device Portal
      • Enable 100M Ethernet and fix some bugs
      • Support built-in UART bus in A64 SoC(not built in the ffu, later provide driver binary and deployment helper)
      • Support built-in IR module in A64 SoC(not built in the ffu, later provide source code and dev doc for developers in community)
    • Known Issues:
      • Kernel debug is enabled by default. This will slow the bring-up process. If a kernel debug is not necessary for you, visit Device Portal and navigate to Processes->Run Command page, run this command to disable:
        • Bcdedit /store C:\EFIESP\EFI\Microsoft\boot\BCD /set {default} debug off
      • An PnP bug in audio device may cause a blue screen when acting software shutdown
      • Ethernet device may not start with problem code 12 at the first time to bring up


[OLD] Win10 IoT [20161121 Beta]



Linux BSP SDK

Linux BSP [4.0]

Linux BSP [3.0]

Linux BSP [2.0], kernel [v3.10], with GPL compliance header



Android SDK

Android Oreo [v8.1]

Android Nougat [v7.0]

Android Marshmallow [v6.0]

Android Lollipop [v5.1.1]



Mali-400 64-bit Driver

Mali-400 64-bit Driver [20171220]

Other Tools



Checking microSD Card Performance and whether it is Counterfeit

This will help you to determine if the SD-Card is Counterfeit Drive or not

Retrieved from "https://wiki.pine64.org/index.php?title=PINE_A64_Software_Releases&oldid=3339"