Difference between revisions of "User:EnthusiasticGeek/Keyboard Case"
Jump to navigation
Jump to search
(More information and organization) |
(link fix) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:note|So far, these are my personal observations of the [[PinePhone Keyboard]]. The name of that will change -- oops.}} | {{Template:note|So far, these are my personal observations of the [[PinePhone (Pro) Keyboard]]. The name of that will change -- oops.}} | ||
<!-- Add image --> | <!-- Add image --> | ||
This Keyboard Case is a case for the [[PinePhone]] and [[PinePhone Pro]]. As the name implies, it adds a keyboard to the phones. It also has a 6000 mAh battery that essentially tripples | This Keyboard Case is a case for the [[PinePhone]] and [[PinePhone Pro]]. As the name implies, it adds a keyboard to the phones. It also has a 6000 mAh battery that essentially tripples the phone's 3000 mAh battery life. | ||
= Connectivity = | = Connectivity = | ||
The Keyboard Case has six pins that connect it to the PinePhone or PinePhone Pro. | The Keyboard Case has six pins that connect it to the PinePhone or PinePhone Pro. They are labeled the same as on the PinePhone and PinePhone Pro. See [[PinePhone#Pogo_pins]] for information on the pogo pins. | ||
<!-- Image with labels for the pins here here --> | <!-- Image with labels for the pins here here --> | ||
<nowiki> | <nowiki> | ||
| Line 14: | Line 14: | ||
* The SDA and SCL pins are connected to the PinePhone or PinePhone Pro's I2C bus. This is how the phone and keyboard communincate. | * The SDA and SCL pins are connected to the PinePhone or PinePhone Pro's I2C bus. This is how the phone and keyboard communincate. | ||
* VBUS connects to the USB +5V line. See [[User:EnthusiasticGeek/Keyboard_Case#Charging Information|Charging Information]] for more information | * VBUS connects to the USB +5V line. See [[User:EnthusiasticGeek/Keyboard_Case#Charging Information|Charging Information]] for more information | ||
* The VBAT pin connects to the battery. This powers the keyboard if it is out of power<!--Citation Needed--> | * The VBAT pin connects to the battery. This powers the keyboard if it is out of power.<!--Citation Needed--> | ||
* INT is a pin that's used for interrupts. In the case of the preinstalled firmware <!--add link to firmware page--> | * INT is a pin that's used for interrupts. In the case of the preinstalled firmware,<!--add link to firmware page--> it's used so the phone can request key presses from the keyboard.<!--Citation Needed--> | ||
<!--I'm pretty sure that INT is just a regular GPIO pin on both the keyboard and PinePhone (Pro), but I'm not sure right now...--> | <!--I'm pretty sure that INT is just a regular GPIO pin on both the keyboard and PinePhone (Pro), but I'm not sure right now...--> | ||
=== Charging Information === | === Charging Information === | ||
In most schematics, including the PinePhone and PinePhone Pro, the | In most schematics, including the PinePhone and PinePhone Pro, the +5V coming from the USB connector is named VBUS. This voltage is fed into the System-On-a-Chip in the PinePhone (Allwinner A64) or PinePhone Pro (RK3399S). The SOC then manages this voltage and charges the battery.<!--Citation and clarification needed--> | ||
The VBUS rail is also accessed through one of the pogo pins on the back of the phone. This is what the keyboard uses to charge the phone. The output of | The VBUS rail is also accessed through one of the pogo pins on the back of the phone. This is what the keyboard uses to charge the phone. The output of it's IP5209 chip<!--explain "the output" better--> is connected to the VBUS rail through this pogo pin, which charges the phone. This makes the keyboard act as a USB charger with only +5V and GND connected. | ||
==== Problems with Charging Implimentation ==== | ==== Problems with Charging Implimentation ==== | ||
{{Template:Note|This could change in the near future with a new revision to the PinePhone.}} | |||
In the case of the original PinePhone, this can be fixed by Pine64 by having the VBUS pin on the keyboard instead connect to the Allwinner A64's second power input, similar to how it's handled on the [[PineTab]]. However, the RK3399S used on the PinePhone Pro does not have this feature, which means it may not be as easily fixable on the PinePhone Pro.<!--Citation needed--> | |||
= Resources = | |||
[https://pine64.com/product/pinephone-pinephone-pro-keyboard-case/ PinePhone (Pro) Keyboard Case on the official Pine Store] | |||
[https://www.pine64.org/2021/12/31/happy-new-year-the-keyboard-and-cases-are-here/ Pine64 Blog Post - January 1st 2022] | |||
[[PinePhone|PinePhone Pine64 Wiki Page]] | |||
Latest revision as of 18:38, 20 February 2023
So far, these are my personal observations of the PinePhone (Pro) Keyboard. The name of that will change -- oops.
This Keyboard Case is a case for the PinePhone and PinePhone Pro. As the name implies, it adds a keyboard to the phones. It also has a 6000 mAh battery that essentially tripples the phone's 3000 mAh battery life.
Connectivity
The Keyboard Case has six pins that connect it to the PinePhone or PinePhone Pro. They are labeled the same as on the PinePhone and PinePhone Pro. See PinePhone#Pogo_pins for information on the pogo pins.
INT SDA SCL VBUS VBAT GND
- The SDA and SCL pins are connected to the PinePhone or PinePhone Pro's I2C bus. This is how the phone and keyboard communincate.
- VBUS connects to the USB +5V line. See Charging Information for more information
- The VBAT pin connects to the battery. This powers the keyboard if it is out of power.
- INT is a pin that's used for interrupts. In the case of the preinstalled firmware, it's used so the phone can request key presses from the keyboard.
Charging Information
In most schematics, including the PinePhone and PinePhone Pro, the +5V coming from the USB connector is named VBUS. This voltage is fed into the System-On-a-Chip in the PinePhone (Allwinner A64) or PinePhone Pro (RK3399S). The SOC then manages this voltage and charges the battery.
The VBUS rail is also accessed through one of the pogo pins on the back of the phone. This is what the keyboard uses to charge the phone. The output of it's IP5209 chip is connected to the VBUS rail through this pogo pin, which charges the phone. This makes the keyboard act as a USB charger with only +5V and GND connected.
Problems with Charging Implimentation
This could change in the near future with a new revision to the PinePhone.
In the case of the original PinePhone, this can be fixed by Pine64 by having the VBUS pin on the keyboard instead connect to the Allwinner A64's second power input, similar to how it's handled on the PineTab. However, the RK3399S used on the PinePhone Pro does not have this feature, which means it may not be as easily fixable on the PinePhone Pro.
Resources
PinePhone (Pro) Keyboard Case on the official Pine Store