Difference between revisions of "PinePhone Sensors and Navigation"

From PINE64
Jump to navigation Jump to search
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
DRAFT
{{under construction}}


== Overview ==
== Overview ==


The Pinephone contains various components that enable or aid orientation and navigation tasks.
The PinePhone contains various components that enable or aid orientation and navigation tasks.


* Multi-GNSS Receiver as part of the cellular modem (GPS/Galileo/Glonass/BeiDou)
* Multi-GNSS Receiver as part of the cellular modem (GPS/Galileo/GLONASS/BeiDou)
* IMU (Inertial Measurment Unit), combined Accelerometer and Gyroscope sensor (MPU6050)
* IMU (Inertial Measurement Unit), combined Accelerometer and Gyroscope sensor (MPU6050)
* Magnetometer (LIS3MDL or AF8133J)
* Magnetometer (LIS3MDL or AF8133J)


...
...


[TODO: add block diagram]
[[File:Pp_sensors_block.png|thumb|500px|none|PinePhone navigation sensors]]


== Hardware ==
== Hardware ==
Line 24: Line 24:
* Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with selectable range of ±250, ±500, ±1000, and ±2000°/sec
* Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with selectable range of ±250, ±500, ±1000, and ±2000°/sec
* Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
* Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
* 400kHz Fast Mode I2C for communicating with all registers
* 400 kHz Fast Mode I2C for communicating with all registers


=== ST LIS3MDL Magnetometer/Compass ===
=== ST LIS3MDL Magnetometer/Compass ===
Line 41: Line 41:
* 400Hz max. update rate
* 400Hz max. update rate
* 16-bit data output
* 16-bit data output


=== Sensor reference frames ===
=== Sensor reference frames ===


The sensors are mounted on the Pinephone's main board in different positions and orientations, for the purpose of orientation and navigation it is important to know the relationship between the sensor coordinate frames and the body frame of the phone...
The sensors are mounted on the PinePhone's mainboard in different positions and orientations. For the purpose of orientation and navigation it is important to know the relationship between the sensor coordinate frames and the body frame of the phone.


[[File:pp coordinates.png|400px|thumb|none|Pinephone sensor coordinates systems (red) to body coordinate system (cyan)]]
[[File:pp coordinates.png|500px|thumb|none|PinePhone sensor coordinates systems (red) and body coordinate system (cyan)]]


As a basis for software development, a common body coordinate system has to be established along with it's relation to a world coordinate system...
As a basis for software development, a common body coordinate system has to be established along with it's relation to a world coordinate system. "iio-sensor-proxy expects the (sensor) readings to match those defined in the Linux IIO documentation, the Windows Integrating Motion and Orientation Sensors whitepaper, and the Android sensor documentation"[ref]. To transform the sensor coordinate systems into body coordinates, 'mount matrices' have to be defined.


[TODO: explain body reference choices, north-east-down world coordinates]
TODO: explain body reference choices, north-east-down world coordinates


== Software ==
== Software ==
Line 57: Line 56:
=== Drivers ===
=== Drivers ===


[TODO: i2cdev, linux-iio, support matrix]
TODO: i2cdev, linux-iio, support matrix


* EG25G:  
* EG25G: provides either UART or USB based interfaces for NMEA data
** /dev/ttyUSB2 : AT command interface
** /dev/ttyUSB1 : default NMEA data output


* MPU6050:inv_mpu6050, inv_mpu6050_i2c, industrialio
* MPU6050:inv_mpu6050, inv_mpu6050_i2c, industrialio
Line 163: Line 164:
=== Userspace services ===
=== Userspace services ===


[TOOD: modem manager, ofono, gpsd, iio-sensor-proxy, geoclue]
TODO: ...
 
* Modem Manager
* ofono
* gpsd
* iio-sensor-proxy
* geoclue


=== Tools/Utilities ===
=== Tools/Utilities ===


[TODO: minicom, gpsmon, monitor-sensor, iio-utils...]
TODO: minicom, gpsmon, monitor-sensor, iio-utils...


=== Applications ===
=== Applications ===


[TODO: pure-maps, navit, ...]
TODO: pure-maps, navit, ...


== Development ==
== Development ==


[TODO: Open issues, tasks, projects]
TODO: Open issues, tasks, projects
 
=== Open issues ===


* AGPS integration
* AGPS integration
* Raw magnetometer data + calibration in iio-sensor-proxy
** how to enable/disable the service?
* Compass App
** update triggers?
*** network connectivity?
*** agps data valid?
 
* Raw magnetometer handling
** Issue: Support polling/non-compensated magnetometers in iio-sensor-proxy
*** https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/310
*** https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/merge_requests/316 (needs more work)
** Issue: raw magnetometer calibration implementation
**** https://appelsiini.net/2018/calibrate-magnetometer/
 
* GPS/Compass App
** TODO: specification
 
=== Frameworks/APIs/... ===
 
* Modem Manager location API
** https://www.freedesktop.org/software/ModemManager/api/latest/gdbus-org.freedesktop.ModemManager1.Modem.Location.html
* oFono location API (experimental?)
** https://git.kernel.org/pub/scm/network/ofono/ofono.git/tree/doc/location-reporting-api.txt
* geoclue API
** https://www.freedesktop.org/software/geoclue/docs/gdbus-org.freedesktop.GeoClue2.Location.html
** https://www.freedesktop.org/software/geoclue/docs/libgeoclue/GClueLocation.html
 
 
[[Category:PinePhone]]

Latest revision as of 16:41, 20 February 2023

This page or section is under construction

Please help to review and edit this page or section. Information are subject to change.

Overview

The PinePhone contains various components that enable or aid orientation and navigation tasks.

  • Multi-GNSS Receiver as part of the cellular modem (GPS/Galileo/GLONASS/BeiDou)
  • IMU (Inertial Measurement Unit), combined Accelerometer and Gyroscope sensor (MPU6050)
  • Magnetometer (LIS3MDL or AF8133J)

...

PinePhone navigation sensors

Hardware

Quectel EG25G Modem / GNSS Receiver

[TODO: add interfaces, constraints, antenna location]

Invensense/TDK MPU6050 IMU

Key features:

  • Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with selectable range of ±250, ±500, ±1000, and ±2000°/sec
  • Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
  • 400 kHz Fast Mode I2C for communicating with all registers

ST LIS3MDL Magnetometer/Compass

Key features:

  • ±4/±8/±12/±16 gauss selectable magnetic full scale range
  • 16-bit data output
  • ...

VTC AF8133J Magnetometer/Compass

Key features:

  • ±12/±22 gauss selectable magnetic full scale range
  • 400Hz max. update rate
  • 16-bit data output

Sensor reference frames

The sensors are mounted on the PinePhone's mainboard in different positions and orientations. For the purpose of orientation and navigation it is important to know the relationship between the sensor coordinate frames and the body frame of the phone.

PinePhone sensor coordinates systems (red) and body coordinate system (cyan)

As a basis for software development, a common body coordinate system has to be established along with it's relation to a world coordinate system. "iio-sensor-proxy expects the (sensor) readings to match those defined in the Linux IIO documentation, the Windows Integrating Motion and Orientation Sensors whitepaper, and the Android sensor documentation"[ref]. To transform the sensor coordinate systems into body coordinates, 'mount matrices' have to be defined.

TODO: explain body reference choices, north-east-down world coordinates

Software

Drivers

TODO: i2cdev, linux-iio, support matrix

  • EG25G: provides either UART or USB based interfaces for NMEA data
    • /dev/ttyUSB2 : AT command interface
    • /dev/ttyUSB1 : default NMEA data output
  • MPU6050:inv_mpu6050, inv_mpu6050_i2c, industrialio
	iio:device2: mpu6050 (buffer capable)
		9 channels found:
			accel_x:  (input, index: 0, format: be:S16/16>>0)
			6 channel-specific attributes found:
				attr  0: calibbias value: -2102
				attr  1: matrix value: 0, 0, 0; 0, 0, 0; 0, 0, 0
				attr  2: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  3: raw value: 912
				attr  4: scale value: 0.000598
				attr  5: scale_available value: 0.000598 0.001196 0.002392 0.004785
			accel_y:  (input, index: 1, format: be:S16/16>>0)
			6 channel-specific attributes found:
				attr  0: calibbias value: 941
				attr  1: matrix value: 0, 0, 0; 0, 0, 0; 0, 0, 0
				attr  2: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  3: raw value: 516
				attr  4: scale value: 0.000598
				attr  5: scale_available value: 0.000598 0.001196 0.002392 0.004785
			accel_z:  (input, index: 2, format: be:S16/16>>0)
			6 channel-specific attributes found:
				attr  0: calibbias value: 1242
				attr  1: matrix value: 0, 0, 0; 0, 0, 0; 0, 0, 0
				attr  2: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  3: raw value: 15860
				attr  4: scale value: 0.000598
				attr  5: scale_available value: 0.000598 0.001196 0.002392 0.004785
			temp:  (input)
			3 channel-specific attributes found:
				attr  0: offset value: 12420
				attr  1: raw value: -1073
				attr  2: scale value: 2.941176
			anglvel_x:  (input, index: 4, format: be:S16/16>>0)
			5 channel-specific attributes found:
				attr  0: calibbias value: 0
				attr  1: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  2: raw value: -32
				attr  3: scale value: 0.001064724
				attr  4: scale_available value: 0.000133090 0.000266181 0.000532362 0.001064724
			anglvel_y:  (input, index: 5, format: be:S16/16>>0)
			5 channel-specific attributes found:
				attr  0: calibbias value: 0
				attr  1: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  2: raw value: 4
				attr  3: scale value: 0.001064724
				attr  4: scale_available value: 0.000133090 0.000266181 0.000532362 0.001064724
			anglvel_z:  (input, index: 6, format: be:S16/16>>0)
			5 channel-specific attributes found:
				attr  0: calibbias value: 0
				attr  1: mount_matrix value: 0, 1, 0; -1, 0, 0; 0, 0, -1
				attr  2: raw value: 0
				attr  3: scale value: 0.001064724
				attr  4: scale_available value: 0.000133090 0.000266181 0.000532362 0.001064724
			timestamp:  (input, index: 7, format: le:S64/64>>0)
			gyro:  (input, WARN:iio_channel_get_type()=UNKNOWN)
			1 channel-specific attributes found:
				attr  0: matrix value: 0, 0, 0; 0, 0, 0; 0, 0, 0
		3 device-specific attributes found:
				attr  0: current_timestamp_clock value: realtime
				attr  1: sampling_frequency value: 50
				attr  2: sampling_frequency_available value: 10 20 50 100 200 500
		2 buffer-specific attributes found:
				attr  0: data_available value: 0
				attr  1: watermark value: 1
		Current trigger: trigger1(mpu6050-dev2)
  • LIS3MDL: st_sensors, st_sensors_i2c, st_magn, st_magn_i2c, industrialio
	iio:device1: lis3mdl (buffer capable)
		4 channels found:
			magn_x:  (input, index: 0, format: le:S16/16>>0)
			3 channel-specific attributes found:
				attr  0: raw value: 6766
				attr  1: scale value: 0.000146
				attr  2: scale_available value: 0.000146 0.000292 0.000438 0.000584
			magn_y:  (input, index: 1, format: le:S16/16>>0)
			3 channel-specific attributes found:
				attr  0: raw value: -2046
				attr  1: scale value: 0.000146
				attr  2: scale_available value: 0.000146 0.000292 0.000438 0.000584
			magn_z:  (input, index: 2, format: le:S16/16>>0)
			3 channel-specific attributes found:
				attr  0: raw value: 12726
				attr  1: scale value: 0.000146
				attr  2: scale_available value: 0.000146 0.000292 0.000438 0.000584
			timestamp:  (input, index: 3, format: le:S64/64>>0)
		3 device-specific attributes found:
				attr  0: current_timestamp_clock value: realtime
				attr  1: sampling_frequency value: 1
				attr  2: sampling_frequency_available value: 1 2 3 5 10 20 40 80
		2 buffer-specific attributes found:
				attr  0: data_available value: 0
				attr  1: watermark value: 1
		Current trigger: trigger0(lis3mdl-trigger)

Userspace services

TODO: ...

  • Modem Manager
  • ofono
  • gpsd
  • iio-sensor-proxy
  • geoclue

Tools/Utilities

TODO: minicom, gpsmon, monitor-sensor, iio-utils...

Applications

TODO: pure-maps, navit, ...

Development

TODO: Open issues, tasks, projects

Open issues

  • AGPS integration
    • how to enable/disable the service?
    • update triggers?
      • network connectivity?
      • agps data valid?
  • GPS/Compass App
    • TODO: specification

Frameworks/APIs/...

Retrieved from "https://wiki.pine64.org/index.php?title=PinePhone_Sensors_and_Navigation&oldid=17727"