Difference between revisions of "ROCK64 MAC Address"

Latest revision as of 13:16, 5 February 2023

To set the MAC address on ROCK64 with the "Android eMMC" image:

Windows ADB driver package installation is required as prerequisite
Download and unzip WNpctool_V1.1.2_1226.zip. Run WNpctool.exe "as Administrator" on Windows OS
Press recovery button on ROCK64 and power ON the ROCK64. After 2 seconds release the recovery button
Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom)
Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button
Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or netscan to check the MAC address of the ROCK64

Revision as of 17:00, 31 December 2020 (view source) Fxc (talk \| contribs) (corrections) ← Older edit		Latest revision as of 13:16, 5 February 2023 (view source) Fxc (talk \| contribs)
Line 8:		Line 8:
	# Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the MAC address of the ROCK64		# Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the MAC address of the ROCK64

	[[Category:~~Rock64~~]]		[[Category:ROCK64]]