Difference between revisions of "ROCK64 MAC Address"
Jump to navigation
Jump to search
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
To set the MAC address on ROCK64 with the "Android eMMC" image: | |||
# [http://files.pine64.org/doc/rock64/tools/DriverAssitant_v4.5.zip Windows ADB driver package] installation is required as prerequisite | # [http://files.pine64.org/doc/rock64/tools/DriverAssitant_v4.5.zip Windows ADB driver package] installation is required as prerequisite | ||
# Download and unzip [http://files.pine64.org/doc/rock64/tools/WNpctool_V1.1.2_1226.zip WNpctool_V1.1.2_1226.zip]. Run WNpctool.exe "as Administrator" on Windows OS | # Download and unzip [http://files.pine64.org/doc/rock64/tools/WNpctool_V1.1.2_1226.zip WNpctool_V1.1.2_1226.zip]. Run WNpctool.exe "as Administrator" on Windows OS | ||
| Line 5: | Line 6: | ||
# Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom) | # Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom) | ||
# Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button | # Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button | ||
# Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the | # Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or [https://www.softperfect.com/products/networkscanner/ netscan] to check the MAC address of the ROCK64 | ||
[[Category:ROCK64]] | |||
Latest revision as of 13:16, 5 February 2023
To set the MAC address on ROCK64 with the "Android eMMC" image:
- Windows ADB driver package installation is required as prerequisite
- Download and unzip WNpctool_V1.1.2_1226.zip. Run WNpctool.exe "as Administrator" on Windows OS
- Press recovery button on ROCK64 and power ON the ROCK64. After 2 seconds release the recovery button
- Plug the USB Cable from Top USB2 slot of ROCK64 to PC USB slot (WNpctool will show "Found one loader" at the bottom)
- Fill in LANMAC: with small letter MacAddress (e.g. 01234567abcd) then press on Write button
- Unplug the USB Cable and reboot the ROCK64 and use DOS command "ping ..." and "arp -a" or netscan to check the MAC address of the ROCK64