SOQuartz - Revision history

Tllim: /* Android SDK */

2024-10-29T19:32:35Z

Android SDK

← Older revision		Revision as of 19:32, 29 October 2024
Line 329:		Line 329:


	The '''Android 11 Stock''' images for SD boot for the SOQuartz. This is test build.		The '''Android 11 Stock''' images for SD boot for the SOQuartz module. This is test build.

	Download:		Download:
	* [https://files.pine64.org/os/Quartz64/android/SOQUARTZ_rk3566_android11_V1.0_sdboot_20211112.img.gz Direct download] from ''pine64.org'' (793MB, MD5 of the Gzip file ''be38ca999f9256bffd47d718f24003ab'', build ~~20240614~~)		* [https://files.pine64.org/os/Quartz64/android/SOQUARTZ_rk3566_android11_V1.0_sdboot_20211112.img.gz Direct download] from ''pine64.org'' (793MB, MD5 of the Gzip file ''be38ca999f9256bffd47d718f24003ab'', build 20211112)

	Notes:		Notes:
	* Please unzip first and then using [https://files.pine64.org/os/Quartz64/android/SDDiskTool_v1.74.zip Rockchip SD card program tool ver 1.74] to program SD card		* Please unzip first and then using [https://files.pine64.org/os/Quartz64/android/SDDiskTool_v1.74.zip Rockchip SD card program tool ver 1.74] to program SD card
			* Please allow 3-5 minutes boot up time on first time for initialization

			The '''Android 11 Stock''' images for eMMC boot for the SOQuartz module. This is test build.

			Download:
			* [https://files.pine64.org/os/Quartz64/android/SOQUARTZ_rk3566_android11_V1.1_emmcboot_20211010.img.gz Direct download] from ''pine64.org'' (793MB, MD5 of the Gzip file ''3a29f0214898eed4d4e85e6ee8b9e4c7'', build 20211010)

			Notes:
			* Please unzip first and then using [https://files.pine64.org/os/Quartz64/android/RKDevTool_v3.13_for_window.zip Rockchip Android tool ver 3.13] to flash in
			* For Windows OS environment please install the [https://files.pine64.org/os/Quartz64/android/DriverAssitant_v5.1.1.zip DriverAssistant v5.11] driver first
			* The OTG port located on USB 3.0 port, needs USB type A to type A cable.
	* Please allow 3-5 minutes boot up time on first time for initialization		* Please allow 3-5 minutes boot up time on first time for initialization

Tllim: /* Android SDK */

2024-10-29T19:26:27Z

Android SDK

@@ Line 327: / Line 327: @@
 ** File Size: 79.00GB
 ** Just the boot blobs (<1MB): [[File:Rk35-blobs.tar.gz]]
 == How-To ==

Dsimic: /* Expansion Ports */ There's also HDMI

2024-08-20T14:19:32Z

Expansion Ports: There's also HDMI

← Older revision		Revision as of 14:19, 20 August 2024
Line 238:		Line 238:
	=== Expansion Ports ===		=== Expansion Ports ===
	* 2x20 pins "Pi2" GPIO Header		* 2x20 pins "Pi2" GPIO Header
			* HDMI video output
	* M.2 slot		* M.2 slot
	* PWM fan header		* PWM fan header

Dsimic: /* Thermal Issues */ Small cleanups

2023-10-20T13:59:20Z

Thermal Issues: Small cleanups

← Older revision		Revision as of 13:59, 20 October 2023
Line 339:		Line 339:
	=== Thermal Issues ===		=== Thermal Issues ===

	The SOQuartz SoM does not have a lot of copper to sink heat into. Therefore, it's recommended you use a heatsink such as the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink.htm Waveshare CM4 Heatsink], the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink-b.htm other Waveshare CM4 Heatsink], or the [https://pine64.com/product/small-fan-type-heatsink/ PINE64 Small Fan Type Heatsink]. Please be aware that the Waveshare heatsinks may interfere with any eMMC module, unless you use very thick (2-~~3mm~~?) thermal pads. ~~(Note: a lot of local~~ resellers ~~will~~ sell CM4 heatsinks or small stick-on heatsinks, no need to order them from abroad unless it's cheaper!)		The SOQuartz SoM does not have a lot of copper to sink heat into. Therefore, it's recommended you use a heatsink such as the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink.htm Waveshare CM4 Heatsink], the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink-b.htm other Waveshare CM4 Heatsink], or the [https://pine64.com/product/small-fan-type-heatsink/ PINE64 Small Fan Type Heatsink]. Please be aware that the Waveshare heatsinks may interfere with any eMMC module, unless you use very thick (2-3 mm?) thermal pads. Local resellers may sell CM4 heatsinks or small stick-on heatsinks, so there's no need to order them from abroad unless it's cheaper.

	Alternatively, or in addition to this, a rectangle of ~~1mm~~ thick thermal pad can be sandwiched between the SoM and the carrier board. This allows the SoM to more efficiently sink heat into the larger mass of the base board.		Alternatively, or in addition to this, a rectangle-shaped piece of 1 mm thick thermal pad can be sandwiched between the SoM and the carrier board. This allows the SoM to more efficiently sink heat into the larger mass of the base board.

	[[Category:SOQuartz]] [[Category:Quartz64]]		[[Category:SOQuartz]]
			[[Category:Quartz64]]

CounterPillow: Add troubleshooting section

2023-08-31T09:33:27Z

Add troubleshooting section

← Older revision		Revision as of 09:33, 31 August 2023
Line 333:		Line 333:
	See [[Quartz64 Building U-Boot]].		See [[Quartz64 Building U-Boot]].

			== Troubleshooting ==

			This section provides information on troubleshooting various common issues you may encounter using the SOQuartz.

			=== Thermal Issues ===

			The SOQuartz SoM does not have a lot of copper to sink heat into. Therefore, it's recommended you use a heatsink such as the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink.htm Waveshare CM4 Heatsink], the [https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink-b.htm other Waveshare CM4 Heatsink], or the [https://pine64.com/product/small-fan-type-heatsink/ PINE64 Small Fan Type Heatsink]. Please be aware that the Waveshare heatsinks may interfere with any eMMC module, unless you use very thick (2-3mm?) thermal pads. (Note: a lot of local resellers will sell CM4 heatsinks or small stick-on heatsinks, no need to order them from abroad unless it's cheaper!)

			Alternatively, or in addition to this, a rectangle of 1mm thick thermal pad can be sandwiched between the SoM and the carrier board. This allows the SoM to more efficiently sink heat into the larger mass of the base board.

	[[Category:SOQuartz]] [[Category:Quartz64]]		[[Category:SOQuartz]] [[Category:Quartz64]]

CounterPillow: Add How-To section with U-Boot building article linked

2023-08-31T09:02:30Z

Add How-To section with U-Boot building article linked

← Older revision		Revision as of 09:02, 31 August 2023
Line 327:		Line 327:
	** Just the boot blobs (<1MB): [[File:Rk35-blobs.tar.gz]]		** Just the boot blobs (<1MB): [[File:Rk35-blobs.tar.gz]]

			== How-To ==

			=== Building Mainline U-Boot ===

			See [[Quartz64 Building U-Boot]].


	[[Category:SOQuartz]] [[Category:Quartz64]]		[[Category:SOQuartz]] [[Category:Quartz64]]

Tllim: /* SOQuartz Module and Baseboard Information, Schematics, and Certifications */

2023-07-26T21:09:47Z

SOQuartz Module and Baseboard Information, Schematics, and Certifications

← Older revision		Revision as of 21:09, 26 July 2023
Line 259:		Line 259:
	** [https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.dsn SOQuartz Model-A baseboard 20220522 PCB DSN file]		** [https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.dsn SOQuartz Model-A baseboard 20220522 PCB DSN file]
	** [https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.rar SOQuartz Model-A baseboard 20220522 PCB Gerber file]		** [https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.rar SOQuartz Model-A baseboard 20220522 PCB Gerber file]


	[[File:BLADE_1U_half_width_server_rack.jpg \|400px\|thumb\|SOQuartz BLADE 3D Print 1U half width server rack]]		[[File:BLADE_1U_half_width_server_rack.jpg \|400px\|thumb\|SOQuartz BLADE 3D Print 1U half width server rack]]
Line 268:		Line 267:
	** [https://files.pine64.org/doc/quartz64/BLADE%201U%20Rack_3D.stp SOQuartz BLADE 1U Rack STP file]		** [https://files.pine64.org/doc/quartz64/BLADE%201U%20Rack_3D.stp SOQuartz BLADE 1U Rack STP file]
	[[File:BLADE_1U_rack_3D.jpg \|400px]]		[[File:BLADE_1U_rack_3D.jpg \|400px]]


			SOQuartz module certifications:
			* [https://files.pine64.org/doc/cert/SOQuartz%20FCC%20Certificate-S21101902401001.pdf SOQuartz module FCC Certificate]
			* [https://files.pine64.org/doc/cert/SOQuartz%20CE%20Certificate-S21101902402001.pdf SOQuartz module CE EMC Certificate]

	== Datasheets for Components and Peripherals ==		== Datasheets for Components and Peripherals ==

Fxc: /* Connector Pins Definition */ fix

2023-04-04T18:23:24Z

Connector Pins Definition: fix

← Older revision		Revision as of 18:23, 4 April 2023
Line 61:		Line 61:
	* 28x GPIO (TBD)		* 28x GPIO (TBD)

	== Connector Pins Definition ==		== Connector Pins Definition ==

	* [https://files.pine64.org/doc/quartz64/SOQuartz%20Connector%20Pin%20Assignments%20ver%201.0.ods SOQuartz Module Connector Pins Definition ver 1.0]		* [https://files.pine64.org/doc/quartz64/SOQuartz%20Connector%20Pin%20Assignments%20ver%201.0.ods SOQuartz Module Connector Pins Definition ver 1.0]



	== SOQuartz Model-A Baseboard Features ==		== SOQuartz Model-A Baseboard Features ==

CounterPillow: /* System Memory */ 16GB -> 8GB eMMC, since PINE64 sells those

2023-04-01T14:02:30Z

System Memory: 16GB -> 8GB eMMC, since PINE64 sells those

← Older revision		Revision as of 14:02, 1 April 2023
Line 37:		Line 37:
	=== System Memory ===		=== System Memory ===
	* RAM Memory Variants: 2GB, 4GB, 8GB LPDDR4.		* RAM Memory Variants: 2GB, 4GB, 8GB LPDDR4.
	* Storage Memory: optional 128Mb SPI Flash and optional eMMC module from ~~16GB~~ up to 128GB		* Storage Memory: optional 128Mb SPI Flash and optional eMMC module from 8GB up to 128GB

	=== Network ===		=== Network ===

Tllim: /* SOQuartz BLADE Baseboard Features */

2023-03-14T23:07:17Z

SOQuartz BLADE Baseboard Features

← Older revision		Revision as of 23:07, 14 March 2023
Line 230:		Line 230:
	* SOQuartz BLADE Baseboard Dimensions: 200mm x 40mm x 15mm		* SOQuartz BLADE Baseboard Dimensions: 200mm x 40mm x 15mm
	* Input Power:		* Input Power:
	** DC ~~12V~~ @ 3A 3.~~4OD~~/1.~~3ID~~ (IEC 60130-10 Type E) Barrel DC Jack connector		** DC 5V @ 3A 3.5OD/1.35ID (IEC 60130-10 Type H) Barrel DC Jack connector
	** PoE		** PoE