ROCKPro64 - Revision history

Dsimic: /* No Video or GPU Acceleration on Debian */ Should fit here better

2024-11-17T07:30:50Z

No Video or GPU Acceleration on Debian: Should fit here better

← Older revision		Revision as of 07:30, 17 November 2024
Line 704:		Line 704:

	=== No Video or GPU Acceleration on Debian ===		=== No Video or GPU Acceleration on Debian ===

			'''Note:''' This issue should be non-existent in newer versions of the Linux kernel, as well as in long-term support (LTS) kernels, with [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=80f4e62730a91572b7fdc657f7bb747e107ae308 this upstream kernel commit] that introduced the required module dependency.

	If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.		If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.
Line 713:		Line 715:
	echo governor_simpleondemand >> /etc/initramfs-tools/modules		echo governor_simpleondemand >> /etc/initramfs-tools/modules
	update-initramfs -u -k $(uname -r)		update-initramfs -u -k $(uname -r)

	'''Note:''' This issue should be non-existent in newer versions of the Linux kernel, as well as in long-term support (LTS) kernels, with [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=80f4e62730a91572b7fdc657f7bb747e107ae308 this upstream kernel commit] that introduced the required module dependency.

	=== PCIe probe failures on Linux kernel boot ===		=== PCIe probe failures on Linux kernel boot ===

Dsimic: /* No Video or GPU Acceleration on Debian */ Expanded a bit, to mention the upstream fix

2024-11-17T07:29:20Z

No Video or GPU Acceleration on Debian: Expanded a bit, to mention the upstream fix

← Older revision		Revision as of 07:29, 17 November 2024
Line 713:		Line 713:
	echo governor_simpleondemand >> /etc/initramfs-tools/modules		echo governor_simpleondemand >> /etc/initramfs-tools/modules
	update-initramfs -u -k $(uname -r)		update-initramfs -u -k $(uname -r)

			'''Note:''' This issue should be non-existent in newer versions of the Linux kernel, as well as in long-term support (LTS) kernels, with [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=80f4e62730a91572b7fdc657f7bb747e107ae308 this upstream kernel commit] that introduced the required module dependency.

	=== PCIe probe failures on Linux kernel boot ===		=== PCIe probe failures on Linux kernel boot ===

Dsimic: /* 3D printable ITX mounting brackets */ Ditto

2024-11-17T07:22:12Z

3D printable ITX mounting brackets: Ditto

← Older revision		Revision as of 07:22, 17 November 2024
Line 683:		Line 683:
	[[file:ITX-Bracket-Mounted.jpg\|300px\|thumb\|right\|A [[Quartz64]] Model-A mounted in an ITX case using 3D printed brackets, which can also be used for the ROCKPro64]]		[[file:ITX-Bracket-Mounted.jpg\|300px\|thumb\|right\|A [[Quartz64]] Model-A mounted in an ITX case using 3D printed brackets, which can also be used for the ROCKPro64]]

	Allows mounting a ROCKPro64-A or Quartz64-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:		Allows mounting a ROCKPro64 or Quartz64 Model-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:

	* AMF/STL/STEP files plus the original FreeCAD file used to create the models [[File:RP64-A_Q64-A_to_ITX_mounting_brackets.zip]]		* AMF/STL/STEP files plus the original FreeCAD file used to create the models [[File:RP64-A_Q64-A_to_ITX_mounting_brackets.zip]]

Dsimic: /* 3D printable ITX mounting brackets */ Clarified a bit

2024-11-17T07:21:45Z

3D printable ITX mounting brackets: Clarified a bit

← Older revision		Revision as of 07:21, 17 November 2024
Line 681:		Line 681:
	== 3D printable ITX mounting brackets ==		== 3D printable ITX mounting brackets ==

	[[file:ITX-Bracket-Mounted.jpg\|300px\|thumb\|right\|A Quartz64-A mounted in an ITX case using 3D printed brackets]]		[[file:ITX-Bracket-Mounted.jpg\|300px\|thumb\|right\|A [[Quartz64]] Model-A mounted in an ITX case using 3D printed brackets, which can also be used for the ROCKPro64]]

	Allows mounting a ROCKPro64-A or Quartz64-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:		Allows mounting a ROCKPro64-A or Quartz64-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:

Dsimic: /* Board Information, Schematics and Certifications */ Can be useful

2024-09-17T13:12:37Z

Board Information, Schematics and Certifications: Can be useful

← Older revision		Revision as of 13:12, 17 September 2024
Line 578:		Line 578:
	== Board Information, Schematics and Certifications ==		== Board Information, Schematics and Certifications ==
	* Board dimensions: 133 mm x 80 mm x 19 mm		* Board dimensions: 133 mm x 80 mm x 19 mm
	* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector		* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector (also known as DC 5521)
	* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]		* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]

Dsimic: Page moved

2024-09-01T13:15:43Z

Page moved

← Older revision		Revision as of 13:15, 1 September 2024
Line 668:		Line 668:
	[[file:NASCaseMain.png\|thumb\|right\|Front View of the PINE64 NAS Case for the ROCKPro64]]		[[file:NASCaseMain.png\|thumb\|right\|Front View of the PINE64 NAS Case for the ROCKPro64]]

	Please [[~~NASCase~~\|follow this this link]] for '''detailed instructions on how to assemble the ROCKPro64 NAS Case'''.		Please [[NAS Case\|follow this this link]] for '''detailed instructions on how to assemble the ROCKPro64 NAS Case'''.

	The NAS Case instructions also contains detailed information about:		The NAS Case instructions also contains detailed information about:

Dsimic: /* Board Information, Schematics and Certifications */ Ah, left that by mistake

2024-08-30T04:12:35Z

Board Information, Schematics and Certifications: Ah, left that by mistake

← Older revision		Revision as of 04:12, 30 August 2024
Line 579:		Line 579:
	* Board dimensions: 133 mm x 80 mm x 19 mm		* Board dimensions: 133 mm x 80 mm x 19 mm
	* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector		* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector

	* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]		* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]

Dsimic: /* Board Information, Schematics and Certifications */ Added v2.1 component placement PDF files with component labels

2024-08-30T04:10:35Z

Board Information, Schematics and Certifications: Added v2.1 component placement PDF files with component labels

← Older revision		Revision as of 04:10, 30 August 2024
Line 579:		Line 579:
	* Board dimensions: 133 mm x 80 mm x 19 mm		* Board dimensions: 133 mm x 80 mm x 19 mm
	* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector		* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector

	* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]		* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.dxf ROCKPro64 v2.1 Board Bottom Outline in AutoCad DXF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.dxf ROCKPro64 v2.1 Board Bottom Outline in AutoCad DXF format]
			** [[:File:Pine64-rockpro64-component-placement-top-v21-20180702.pdf\|ROCKPro64 v2.1 Board Top Silkscreen in PDF format]] (contains component labels)
			** [[:File:Pine64-rockpro64-component-placement-bottom-v21-20180702.pdf\|ROCKPro64 v2.1 Board Bottom Silkscreen in PDF format]] (contains component labels)
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.pdf ROCKPro64 v2.1 Board Top Outline in PDF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.pdf ROCKPro64 v2.1 Board Top Outline in PDF format]
	** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.pdf ROCKPro64 v2.1 Board Bottom Outline in PDF format]		** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.pdf ROCKPro64 v2.1 Board Bottom Outline in PDF format]

Dsimic: /* PCIe probe failures on Linux kernel boot */ Cleaned up

2023-11-18T04:41:34Z

PCIe probe failures on Linux kernel boot: Cleaned up

← Older revision		Revision as of 04:41, 18 November 2023
Line 714:		Line 714:
	=== PCIe probe failures on Linux kernel boot ===		=== PCIe probe failures on Linux kernel boot ===

	~~During~~ Linux ~~boot~~, you might experience PCIe probe failures. ~~This will result in inability to boot over~~ PCIe.		While booting the Linux kernel, you might experience PCIe probe failures, which render the attached PCIe device inaccessible. The [https://lore.kernel.org/all/20230509153912.515218-1-vincenzopalazzodev@gmail.com/ "drivers: pci: introduce configurable delay for Rockchip PCIe bus scan"] thread on the Linux kernel mailing list (LKML) discusses this issue and proposes a fix.

	~~[https://lore.~~kernel~~.org/all/20230509153912.515218-1-vincenzopalazzodev@gmail.com/ LKML "drivers: pci: introduce configurable delay for Rockchip PCIe bus scan"] discusses this issue~~, ~~and proposes a~~ fix.		Manjaro ARM applies the following patches to the kernel package, which fix the issue:

	~~Manjaro have applied this patch, which fixes the issue:~~		* [https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1005-rk3399-rp64-pcie-Reimplement-rockchip-PCIe-bus-scan-delay.patch 1005-rk3399-rp64-pcie-Reimplement-rockchip-PCIe-bus-scan-delay.patch]
			* [https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1007-arm64-dts-rockchip-Add-PCIe-bus-scan-delay-to-RockPr.patch 1007-arm64-dts-rockchip-Add-PCIe-bus-scan-delay-to-RockPr.patch]
	* https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1005-rk3399-rp64-pcie-Reimplement-rockchip-PCIe-bus-scan-delay.patch
	* https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1007-arm64-dts-rockchip-Add-PCIe-bus-scan-delay-to-RockPr.patch

	[[Category:ROCKPro64]]		[[Category:ROCKPro64]]
	[[Category:Rockchip RK3399]]		[[Category:Rockchip RK3399]]

Dsimic: /* No Video or GPU Acceleration on Debian */ Better wording

2023-11-18T04:36:42Z

No Video or GPU Acceleration on Debian: Better wording

← Older revision		Revision as of 04:36, 18 November 2023
Line 705:		Line 705:
	If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.		If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.

	The usual sign of this being the case is the following line in ~~your~~ log: <code>[drm:panfrost_devfreq_init [panfrost]] ERROR Couldn't initialize GPU devfreq</code>		The usual sign of this being the case is the following line in the kernel log: <code>[drm:panfrost_devfreq_init [panfrost]] ERROR Couldn't initialize GPU devfreq</code>

	~~Log in to your ROCKPro64~~, ~~and~~ run the following:		To fix this issue, run the following as <code>root</code> and reboot:

	~~sudo -i~~		echo governor_simpleondemand >> /etc/initramfs-tools/modules
	echo governor_simpleondemand >> /etc/initramfs-tools/modules && update-initramfs -u -k $(uname -r)		update-initramfs -u -k $(uname -r)
	~~exit~~

	~~Then, reboot.~~

	=== PCIe probe failures on Linux kernel boot ===		=== PCIe probe failures on Linux kernel boot ===