PinePhone component list - Revision history

Kx: /* P.11 LCM/CTP */

2023-12-25T03:51:03Z

P.11 LCM/CTP

← Older revision		Revision as of 03:51, 25 December 2023
Line 157:		Line 157:

	* OK-24F024-04		* OK-24F024-04
	* 24 position center strip contacts socket for MIPI-DSI-LCM FPC.		* 24 position center strip contacts socket for MIPI-DSI-LCM FPC. 4 additional ground pins for signal integrity (28 total contacts to mainboard)
	* Grounded at 4 ~~corners~~ for ~~reliability~~ (28 total contacts to mainboard)

	LED2:		LED2:
Line 167:		Line 166:

	* CON6-0.5, TP_6PIN-ZQ01		* CON6-0.5, TP_6PIN-ZQ01
	* 6 pin flip lock socket for I2C-CTP FPC ZIF header. ~~Grounded on both sides~~ for ~~reliability~~. (8 total contacts to mainboard)		* 6 pin flip lock socket for I2C-CTP FPC ZIF header. 2 additional ground pins for signal integrity. (8 total contacts to mainboard)

	ED1100, ED1101, ED1102, ED1103:		ED1100, ED1101, ED1102, ED1103:

Kx: /* P.11 LCM/CTP */

2023-12-25T02:03:58Z

P.11 LCM/CTP

← Older revision		Revision as of 02:03, 25 December 2023
Line 157:		Line 157:

	* OK-24F024-04		* OK-24F024-04
	24 position center strip contacts socket for MIPI-DSI-LCM FPC.		* 24 position center strip contacts socket for MIPI-DSI-LCM FPC.
	Grounded at 4 corners for reliability (28 total contacts to mainboard)		* Grounded at 4 corners for reliability (28 total contacts to mainboard)

	LED2:		LED2:
Line 167:		Line 167:

	* CON6-0.5, TP_6PIN-ZQ01		* CON6-0.5, TP_6PIN-ZQ01
	6 pin flip lock socket for I2C-CTP FPC ZIF header.		* 6 pin flip lock socket for I2C-CTP FPC ZIF header. Grounded on both sides for reliability. (8 total contacts to mainboard)
	Grounded on both sides for reliability. (8 total contacts to mainboard)

	ED1100, ED1101, ED1102, ED1103:		ED1100, ED1101, ED1102, ED1103:

Kx: /* P.11 LCM/CTP */

2023-12-25T02:02:31Z

P.11 LCM/CTP

← Older revision		Revision as of 02:02, 25 December 2023
Line 156:		Line 156:
	J1100:		J1100:

	* ~~FPC24-PT05B,~~ OK-~~24F~~-04 ~~28-pin connector to the~~ MIPI-DSI ~~LCD~~		* OK-24F024-04
	* Note: FPC ~~with 24 pin header connects to 24 pin “board to board” socket~~. 4 ~~additional pins ground the socket~~ for reliability.		24 position center strip contacts socket for MIPI-DSI-LCM FPC.
			Grounded at 4 corners for reliability (28 total contacts to mainboard)

	LED2:		LED2:
Line 165:		Line 166:
	J1101:		J1101:

	* CON6-0.5, TP_6PIN-ZQ01 ~~8-pin connector to the capacitive touch panel controller~~		* CON6-0.5, TP_6PIN-ZQ01
	* Note: FPC with 6 pin ZIF header ~~connects to 6 pin ZIF lever-lock socket~~. ~~2 additional pins ground the socket~~ for reliability.		6 pin flip lock socket for I2C-CTP FPC ZIF header.
			Grounded on both sides for reliability. (8 total contacts to mainboard)

	ED1100, ED1101, ED1102, ED1103:		ED1100, ED1101, ED1102, ED1103:

Kx: /* P.4 LPDDR3 FPGA178 */

2023-12-25T00:39:15Z

P.4 LPDDR3 FPGA178

← Older revision		Revision as of 00:39, 25 December 2023
Line 21:		Line 21:
	* '''X''' : crystal oscillator (used for clocks)		* '''X''' : crystal oscillator (used for clocks)

	== P.4 LPDDR3 ~~FPGA178~~ ==		== P.4 LPDDR3 FBGA178 ==

	Note: The title of this schematic page should be changed from "LPDDR3 FPGA178" to "LPDDR3 FBGA178", because the RAM chip is a 178-pin fine pitch ball grid array (FBGA), not a field-programmable gate array (FPGA).

	DU1:		DU1:

Kx: /* Other components not in the schematics */

2023-12-24T23:55:31Z

Other components not in the schematics

← Older revision		Revision as of 23:55, 24 December 2023
Line 383:		Line 383:
	== Other components not in the schematics ==		== Other components not in the schematics ==

	* SGMICRO [http://www.sg-micro.com/uploads/soft/20190829/1567071622.pdf SGM3140] 500mA buck/boost charge pump LED driver for camera flash and torch, TDFN-10 3x3x0.75 mm
	* Note: The [[PinePhone#Components\|PinePhone page]] lists the SGM3140, but the schematics contain the U1000: awinic AW3641EDNR, so it is unclear why the SGM3140 is needed.
	* Goodix [http://files.pine64.org/doc/datasheet/pinephone/GT917S-Datasheet.pdf GT917S] touch controller		* Goodix [http://files.pine64.org/doc/datasheet/pinephone/GT917S-Datasheet.pdf GT917S] touch controller
	* Sitronix [http://files.pine64.org/doc/datasheet/pinephone/ST7703_DS_v01_20160128.pdf ST7703] MIPI LCD driver		* Sitronix [http://files.pine64.org/doc/datasheet/pinephone/ST7703_DS_v01_20160128.pdf ST7703] MIPI LCD driver

Kx: /* P.11 LCM/CTP */

2023-12-24T22:58:34Z

P.11 LCM/CTP

← Older revision		Revision as of 22:58, 24 December 2023
Line 159:		Line 159:

	* FPC24-PT05B, OK-24F-04 28-pin connector to the MIPI-DSI LCD		* FPC24-PT05B, OK-24F-04 28-pin connector to the MIPI-DSI LCD
			* Note: FPC with 24 pin header connects to 24 pin “board to board” socket. 4 additional pins ground the socket for reliability.

	LED2:		LED2:
Line 167:		Line 168:

	* CON6-0.5, TP_6PIN-ZQ01 8-pin connector to the capacitive touch panel controller		* CON6-0.5, TP_6PIN-ZQ01 8-pin connector to the capacitive touch panel controller
	* Note: ~~The label says that the connector has~~ 6-pins~~, but~~ the ~~schematic shows 8-pins~~.		* Note: FPC with 6 pin ZIF header connects to 6 pin ZIF lever-lock socket. 2 additional pins ground the socket for reliability.

	ED1100, ED1101, ED1102, ED1103:		ED1100, ED1101, ED1102, ED1103:

Fxc: Fix

2023-03-16T00:33:24Z

Fix

← Older revision		Revision as of 00:33, 16 March 2023
Line 1:		Line 1:
	The following list of components are found in the [https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf schematic] for the PinePhone 1.2b.		The following list of components are found in the [https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf schematic] for the PinePhone 1.2b.

	===Abreviations used in schematic===		== Abreviations used in schematic ==

	The following [https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/electronics-circuit-symbols-overview.php abbreviations] are used as the starting letter(s) to identify the components in the PinePhone schematics:		The following [https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/electronics-circuit-symbols-overview.php abbreviations] are used as the starting letter(s) to identify the components in the PinePhone schematics:
Line 21:		Line 21:
	* '''X''' : crystal oscillator (used for clocks)		* '''X''' : crystal oscillator (used for clocks)

	===P.4 LPDDR3 FPGA178===		== P.4 LPDDR3 FPGA178 ==

	Note: The title of this schematic page should be changed from "LPDDR3 FPGA178" to "LPDDR3 FBGA178", because the RAM chip is a 178-pin fine pitch ball grid array (FBGA), not a field-programmable gate array (FPGA).		Note: The title of this schematic page should be changed from "LPDDR3 FPGA178" to "LPDDR3 FBGA178", because the RAM chip is a 178-pin fine pitch ball grid array (FBGA), not a field-programmable gate array (FPGA).
Line 30:		Line 30:
	* Note: RAM will be clocked slower, since the Allwinner A64 only supports up to 3GB DDR3-1333 (666.5MHz) and doesn't specify the top supported LPDDR3 speed.		* Note: RAM will be clocked slower, since the Allwinner A64 only supports up to 3GB DDR3-1333 (666.5MHz) and doesn't specify the top supported LPDDR3 speed.

	===P.5 CPU===		== P.5 CPU ==

	U1:		U1:
Line 50:		Line 50:
	* Note: Not clear if using the [https://www.mouser.com/ProductDetail/Seiko-Instruments-Micro-Energy/SC32S-125PF20PPM?qs=3CPZD7qAgihedyqH7awUjg%3D%3D SC32S-12.5PF20PPM] or the [https://www.mouser.com/ProductDetail/Seiko-Semiconductors/SC32S-7PF20PPM?qs=3CPZD7qAgigZSR1ASVAS6w%3D%3D SC32S-7PF20PPM]		* Note: Not clear if using the [https://www.mouser.com/ProductDetail/Seiko-Instruments-Micro-Energy/SC32S-125PF20PPM?qs=3CPZD7qAgihedyqH7awUjg%3D%3D SC32S-12.5PF20PPM] or the [https://www.mouser.com/ProductDetail/Seiko-Semiconductors/SC32S-7PF20PPM?qs=3CPZD7qAgigZSR1ASVAS6w%3D%3D SC32S-7PF20PPM]

	===P.6 POWER===		== P.6 POWER ==

	ED600:		ED600:
Line 83:		Line 83:
	* On semiconductor [https://www.onsemi.com/pub/Collateral/SS24-D.PDF SS24] Schottky power rectifier, [https://www.nexperia.com/packages/SOD123.html SOD123] package		* On semiconductor [https://www.onsemi.com/pub/Collateral/SS24-D.PDF SS24] Schottky power rectifier, [https://www.nexperia.com/packages/SOD123.html SOD123] package

	===P.7 NAND/eMMC===		== P.7 NAND/eMMC ==

	U700:		U700:
Line 92:		Line 92:
	* Note 3: The schematic lists the part as KM110SS0016GxA-DDD00WT, but [https://xnux.eu/devices/photos/pp-1.1.html these photos] show that its variant, the KM111SS0016GxA-DDD00WT, is being used in the 16GB PinePhone.		* Note 3: The schematic lists the part as KM110SS0016GxA-DDD00WT, but [https://xnux.eu/devices/photos/pp-1.1.html these photos] show that its variant, the KM111SS0016GxA-DDD00WT, is being used in the 16GB PinePhone.

	===P.8 AUDIO===		== P.8 AUDIO ==

	ED800, ED801, ED802, ED803, ED804, ED805, ED806:		ED800, ED801, ED802, ED803, ED804, ED805, ED806:
Line 122:		Line 122:
	* 600ohm at 100MHz ferrite bead in a [https://www.electronics-notes.com/articles/electronic_components/surface-mount-technology-smd-smt/packages.php 0402] package ([https://uk.farnell.com/c/passive-components/emc-rfi-suppression/ferrites-ferrite-assortments/ferrite-beads?impedance-100mhz=600ohm examples])		* 600ohm at 100MHz ferrite bead in a [https://www.electronics-notes.com/articles/electronic_components/surface-mount-technology-smd-smt/packages.php 0402] package ([https://uk.farnell.com/c/passive-components/emc-rfi-suppression/ferrites-ferrite-assortments/ferrite-beads?impedance-100mhz=600ohm examples])

	===P.9 T-CADD/USB===		== P.9 T-CADD/USB ==

	Q901, Q902, Q903:		Q901, Q902, Q903:
Line 136:		Line 136:
	* SA-2202-112 25-pin Micro-SIM and TF slot		* SA-2202-112 25-pin Micro-SIM and TF slot

	===P.10 CAMERA===		== P.10 CAMERA ==

	J1000:		J1000:
Line 152:		Line 152:
	* Shanghai awinic technology [https://pdf1.alldatasheet.com/datasheet-pdf/view/1147538/AWINIC/AW3641EDNR/+014J75AXvUpOKG+GczEDzOOae+/datasheet.pdf AW3641EDNR] flash LED driver with programmable timer and PWM dimming torch mode, 1A, 8 current levels.		* Shanghai awinic technology [https://pdf1.alldatasheet.com/datasheet-pdf/view/1147538/AWINIC/AW3641EDNR/+014J75AXvUpOKG+GczEDzOOae+/datasheet.pdf AW3641EDNR] flash LED driver with programmable timer and PWM dimming torch mode, 1A, 8 current levels.

	===P.11 LCM/CTP===		== P.11 LCM/CTP ==

	Note: "LCM/CTP" means "liquid crystal display monitor/capacitive touch panel". An LCM generally includes an LCD screen + LED backlight + PCB with the LCD controller + frame.		Note: "LCM/CTP" means "liquid crystal display monitor/capacitive touch panel". An LCM generally includes an LCD screen + LED backlight + PCB with the LCD controller + frame.
Line 177:		Line 177:
	* Chipown [http://www.datasheet39.com/download.php?id=924200 AP3127B025] step-up DC/DC converter series, white LED backlight driver, 6-pin SOT-23-6L package.		* Chipown [http://www.datasheet39.com/download.php?id=924200 AP3127B025] step-up DC/DC converter series, white LED backlight driver, 6-pin SOT-23-6L package.

	===P.12 SENSORS/MT/KEY===		== P.12 SENSORS/MT/KEY ==

	J1200:		J1200:
Line 223:		Line 223:
	* Note: Presumably this is a vibration motor.		* Note: Presumably this is a vibration motor.

	===P.13 DIGITAL VIDEO===		== P.13 DIGITAL VIDEO ==

	J1300:		J1300:
Line 265:		Line 265:
	* Mercury United Electronics [https://rf.cdiweb.com/products/detail/x322500018p3020207060r-mercury-united-electronics-inc/71942/ X3225] 27.000 MHz crystal oscillator		* Mercury United Electronics [https://rf.cdiweb.com/products/detail/x322500018p3020207060r-mercury-united-electronics-inc/71942/ X3225] 27.000 MHz crystal oscillator

	===P.14 WIFI+BT===		== P.14 WIFI+BT ==

	U1400:		U1400:
Line 283:		Line 283:
	* Antenna		* Antenna

	===P.15 MODEM-4G===		== P.15 MODEM-4G ==

	U1500:		U1500:
Line 306:		Line 306:
	* Note: The documentation shows 6 pins, but the schematic shows 8 pins.		* Note: The documentation shows 6 pins, but the schematic shows 8 pins.

	===Component Counts===		== Component Counts ==

	{\| class="wikitable"		{\| class="wikitable"
Line 380:		Line 380:
	Source: [https://forums.puri.sm/t/component-counts-in-the-librem-5-and-pinephone/11240 Amos Batto]		Source: [https://forums.puri.sm/t/component-counts-in-the-librem-5-and-pinephone/11240 Amos Batto]

	===Other components not in the schematics===		== Other components not in the schematics ==

	* SGMICRO [http://www.sg-micro.com/uploads/soft/20190829/1567071622.pdf SGM3140] 500mA buck/boost charge pump LED driver for camera flash and torch, TDFN-10 3x3x0.75 mm		* SGMICRO [http://www.sg-micro.com/uploads/soft/20190829/1567071622.pdf SGM3140] 500mA buck/boost charge pump LED driver for camera flash and torch, TDFN-10 3x3x0.75 mm

Fxc: Overengineered wiki page fixed to spec, removed html code, fixed links

2023-03-15T23:40:53Z

Overengineered wiki page fixed to spec, removed html code, fixed links

Show changes

Fxc: spec

2023-03-15T23:28:06Z

spec

MikeBanon: /* P.15 MODEM-4G */ fix the Quectel document references

2021-08-20T13:12:56Z

P.15 MODEM-4G: fix the Quectel document references

← Older revision		Revision as of 13:12, 20 August 2021
Line 114:		Line 114:
	===P.15 MODEM-4G===		===P.15 MODEM-4G===

	* U1500:<br>~~Quectel~~ [https://www.quectel.com/~~UploadFile~~/~~Product~~/Quectel_EG25-~~G_LTE_Specification_V1~~.1.pdf ~~EG25-G~~] GSM/UMTS/LTE cellular modem and GNSS (GPS/Galileo/GLONASS/BeiDou/QZSS, with A-GPS), LGA-144 9.0x32.0x2.4 mm		* U1500:<br>[https://www.quectel.com/product/lte-eg25-g/ Quectel EG25-G][[File:Quectel_EG25-G_LTE_Standard_Specification_V1.3.pdf]] GSM/UMTS/LTE cellular modem and GNSS (GPS/Galileo/GLONASS/BeiDou/QZSS, with A-GPS), LGA-144 9.0x32.0x2.4 mm
	* U1502, 1503, 1504:<br>Texas Instruments [https://www.ti.com/lit/ds/symlink/txb0104.pdf TXB0104YZT] 4-bit bidirectional voltage-level translator with automatic direction sensing and ±15-kV ESD protection, 12-pin DSBGA 1.40×1.90 mm		* U1502, 1503, 1504:<br>Texas Instruments [https://www.ti.com/lit/ds/symlink/txb0104.pdf TXB0104YZT] 4-bit bidirectional voltage-level translator with automatic direction sensing and ±15-kV ESD protection, 12-pin DSBGA 1.40×1.90 mm
	* Q1501, Q1503, Q1504, Q1505:<br>Toshiba [https://toshiba.semicon-storage.com/info/docget.jsp?did=10004&prodName=SSM3K35MFV SSM3K35MFV] field-effect transistor, silicon N-channel MOS type		* Q1501, Q1503, Q1504, Q1505:<br>Toshiba [https://toshiba.semicon-storage.com/info/docget.jsp?did=10004&prodName=SSM3K35MFV SSM3K35MFV] field-effect transistor, silicon N-channel MOS type

← Older revision		Revision as of 23:28, 15 March 2023
Line 55:		Line 55:
	* J801:<br>JA-3606-001AA 3.5mm audio jack		* J801:<br>JA-3606-001AA 3.5mm audio jack
	* Q801:<br>Toshiba [https://toshiba.semicon-storage.com/info/docget.jsp?did=10004&prodName=SSM3K35MFV SSM3K35MFV] field-effect transistor, silicon N-channel MOS type		* Q801:<br>Toshiba [https://toshiba.semicon-storage.com/info/docget.jsp?did=10004&prodName=SSM3K35MFV SSM3K35MFV] field-effect transistor, silicon N-channel MOS type
	* U800:<br>Shanghai awinic technology [https://www.awinic.com/Cn/Index/pageView/catid/107/id/45.html AW8737SCSR] high efficiency (80%), low noise (53μV), ultra-low distortion (0.008%), constant large volume, 7th generation class K audio amplifier, 1.6×1.68 mm CSP-14 package, 0.4mm pitch [https://pdf1.alldatasheet.com/datasheet-pdf/view/1147555/AWINIC/AW8737SCSR/+014J7J8XvUpOKG+Gc..whdxee+/datasheet.pdf [datasheet]]		* U800:<br>Shanghai awinic technology [https://www.awinic.com/Cn/Index/pageView/catid/107/id/45.html AW8737SCSR] high efficiency (80%), low noise (53μV), ultra-low distortion (0.008%), constant large volume, 7th generation class K audio amplifier, 1.6×1.68 mm CSP-14 package, 0.4mm pitch [https://pdf1.alldatasheet.com/datasheet-pdf/view/1147555/AWINIC/AW8737SCSR/+014J7J8XvUpOKG+Gc..whdxee+/datasheet.pdf datasheet]
	* FB800, FB801:<br>600ohm at 100MHz ferrite bead in a [https://www.electronics-notes.com/articles/electronic_components/surface-mount-technology-smd-smt/packages.php 0402] package ([https://uk.farnell.com/c/passive-components/emc-rfi-suppression/ferrites-ferrite-assortments/ferrite-beads?impedance-100mhz=600ohm examples])		* FB800, FB801:<br>600ohm at 100MHz ferrite bead in a [https://www.electronics-notes.com/articles/electronic_components/surface-mount-technology-smd-smt/packages.php 0402] package ([https://uk.farnell.com/c/passive-components/emc-rfi-suppression/ferrites-ferrite-assortments/ferrite-beads?impedance-100mhz=600ohm examples])

Line 84:		Line 84:
	* J1200:<br>8-pin connector to test points		* J1200:<br>8-pin connector to test points
	* ED1200, ED1201:<br>Will Semiconductor [https://pdf1.alldatasheet.com/datasheet-pdf/view/1136979/WILLSEMI/ESD5451X/+01_7-9BXuHlLuHRMflaL..hDk+/datasheet.pdf ESD5451X] 1-line, bi-directional, transient voltage suppressor, EDS protection up to ±30kV and 8A.		* ED1200, ED1201:<br>Will Semiconductor [https://pdf1.alldatasheet.com/datasheet-pdf/view/1136979/WILLSEMI/ESD5451X/+01_7-9BXuHlLuHRMflaL..hDk+/datasheet.pdf ESD5451X] 1-line, bi-directional, transient voltage suppressor, EDS protection up to ±30kV and 8A.
	* U1200:<br>STmicroelectronics [https://www.st.com/en/mems-and-sensors/lis3mdl.html LIS3MDL] ultra-low-power three-axis magnetometer, LGA-12 2.0x2.0x1.0 mm [https://www.st.com/resource/en/datasheet/lis3mdl.pdf [datasheet]]<br><font color=dimgrey>'''''Note:''''' The LIS3MDL is currently unavailable, so it [https://www.pine64.org/2021/03/15/march-update/#comment-4273 has been replaced] in the PinePhone Beta Edition with the Voltafield AF8133L e-Compass, which is unlisted on the Voltafield web site, but the [http://www.voltafield.com/products01.html AF8133J] is listed. Presumably U1200 will be unpopulated and U1203 will be populated in the Beta Edition, since they appear to be alternatives.</font>		* U1200:<br>STmicroelectronics [https://www.st.com/en/mems-and-sensors/lis3mdl.html LIS3MDL] ultra-low-power three-axis magnetometer, LGA-12 2.0x2.0x1.0 mm [https://www.st.com/resource/en/datasheet/lis3mdl.pdf datasheet]<br><font color=dimgrey>'''''Note:''''' The LIS3MDL is currently unavailable, so it [https://www.pine64.org/2021/03/15/march-update/#comment-4273 has been replaced] in the PinePhone Beta Edition with the Voltafield AF8133L e-Compass, which is unlisted on the Voltafield web site, but the [http://www.voltafield.com/products01.html AF8133J] is listed. Presumably U1200 will be unpopulated and U1203 will be populated in the Beta Edition, since they appear to be alternatives.</font>
	* U1201:<br>SensorTek [https://web.archive.org/web/20190601120915/http://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html STK3311-A] proximity and ambient light sensor (large gap) with built-in infrared LED, DFN-8 3.94x2.36x1.35 mm [https://cdn.datasheetspdf.com/pdf-down/S/T/K/STK3310-Sensortek.pdf [datasheet]]		* U1201:<br>SensorTek [https://web.archive.org/web/20190601120915/http://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html STK3311-A] proximity and ambient light sensor (large gap) with built-in infrared LED, DFN-8 3.94x2.36x1.35 mm [https://cdn.datasheetspdf.com/pdf-down/S/T/K/STK3310-Sensortek.pdf datasheet]
	* U1202:<br>TDK InvenSense [https://invensense.tdk.com/products/motion-tracking/6-axis/mpu-6050/ MPU6050] six-axis, low-power MEMS gyroscope and accelerometer, QFN-24 4x4x0.9 mm [https://invensense.tdk.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf [datasheet]]		* U1202:<br>TDK InvenSense [https://invensense.tdk.com/products/motion-tracking/6-axis/mpu-6050/ MPU6050] six-axis, low-power MEMS gyroscope and accelerometer, QFN-24 4x4x0.9 mm [https://invensense.tdk.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf datasheet]
	* U1203:<br>Asahi Kasei Microdevices (AKM) [https://static6.arrow.com/aropdfconversion/19f6bc6e0891877d596c7b1da69df3d2ea4388a5/31ak09911.pdf AK09911] 3-axis electronic compass IC with Hall sensor, 8-pin WL-CSP (BGA), 1.2×1.2×0.5 mm<br>'''''or'''''<br>Voltafield Technology Corp. (VTC) [http://www.winforcetek.com/pdf/PD-DST-0011-00%20AF8133J%20V03.pdf AF8133J] 3-axis electronic compass with proprietary anisotropic magneto resistive (AMR) technology, 8-pin WLCSP 1.2x1.2x0.5 mm<br><font color=dimgrey>'''''Note:''''' These parts appear to be alternatives to be used if the LIS3MDL is unavailable, so U1203 was probably unpopulated in BraveHeart and the Community Editions, but will be populated in the Beta Edition.</font>		* U1203:<br>Asahi Kasei Microdevices (AKM) [https://static6.arrow.com/aropdfconversion/19f6bc6e0891877d596c7b1da69df3d2ea4388a5/31ak09911.pdf AK09911] 3-axis electronic compass IC with Hall sensor, 8-pin WL-CSP (BGA), 1.2×1.2×0.5 mm<br>'''''or'''''<br>Voltafield Technology Corp. (VTC) [http://www.winforcetek.com/pdf/PD-DST-0011-00%20AF8133J%20V03.pdf AF8133J] 3-axis electronic compass with proprietary anisotropic magneto resistive (AMR) technology, 8-pin WLCSP 1.2x1.2x0.5 mm<br><font color=dimgrey>'''''Note:''''' These parts appear to be alternatives to be used if the LIS3MDL is unavailable, so U1203 was probably unpopulated in BraveHeart and the Community Editions, but will be populated in the Beta Edition.</font>
	* U1204:<br>Bosch Sensortek [https://datasheet.lcsc.com/szlcsc/1912111437_Bosch-Sensortec-BMI120_C437657.pdf BMI120] 3-axis gyroscope and accelerometer, LGA-14 2.5x3.0x0.83 mm<br><font color=dimgrey>'''''Note:''''' Listed as “NC/BMI120”, where “NC” probably means “not connected”, so there may be circuits in the PCB for the part, but it is not placed on the board. This is probably an alternative to the TDK InvenSense MPU6050, in case it isn't available or costs too much.</font>		* U1204:<br>Bosch Sensortek [https://datasheet.lcsc.com/szlcsc/1912111437_Bosch-Sensortec-BMI120_C437657.pdf BMI120] 3-axis gyroscope and accelerometer, LGA-14 2.5x3.0x0.83 mm<br><font color=dimgrey>'''''Note:''''' Listed as “NC/BMI120”, where “NC” probably means “not connected”, so there may be circuits in the PCB for the part, but it is not placed on the board. This is probably an alternative to the TDK InvenSense MPU6050, in case it isn't available or costs too much.</font>
Line 97:		Line 97:
	* J1300:<br>OK-50F-04 40-pin connector<br><font color=dimgrey>'''''Note:''''' This part is probably produced by Shenzhen Yaqi Technology Co., which is part of OCN in Taiwan, and uses the Archie brand name.</font>		* J1300:<br>OK-50F-04 40-pin connector<br><font color=dimgrey>'''''Note:''''' This part is probably produced by Shenzhen Yaqi Technology Co., which is part of OCN in Taiwan, and uses the Archie brand name.</font>
	* U1304:<br>Analogix [https://www.analogix.com/en/system/files/AA-002281-PB-6-ANX7688_Product_Brief_0.pdf ANX7688] HDMI to USB-C bridge with MUX, converts HDMI 2.0 to DisplayPort Alternate Mode, USB-C Power Delivery (PD), BGA-64.<br><font color=dimgrey>'''''Note 1:''''' The schematic lists this part as “ANX7688S”, but it is unclear what the “S” at the end stands for.<br>'''''Note 2:''''' xnux.eu provides [https://xnux.eu/devices/feature/anx7688.html more info] on the ANX7688, including flashing the firmware.</font>		* U1304:<br>Analogix [https://www.analogix.com/en/system/files/AA-002281-PB-6-ANX7688_Product_Brief_0.pdf ANX7688] HDMI to USB-C bridge with MUX, converts HDMI 2.0 to DisplayPort Alternate Mode, USB-C Power Delivery (PD), BGA-64.<br><font color=dimgrey>'''''Note 1:''''' The schematic lists this part as “ANX7688S”, but it is unclear what the “S” at the end stands for.<br>'''''Note 2:''''' xnux.eu provides [https://xnux.eu/devices/feature/anx7688.html more info] on the ANX7688, including flashing the firmware.</font>
	* U1300:<br>America Techcode Semiconductor [http://techcodesemi.com/datasheet/TD6817.pdf TD6817] 1.5MHz 2A synchronous step-down regulator dropout, SOT23-5 package<br>'''''or'''''<br>Diodes Incorporated [https://media.digikey.com/pdf/Data%20Sheets/Diodes%20PDFs/AP3406.pdf AP3406K-ADJTRG1] buck switching regulator IC positive adjustable 0.6V 650mA [https://media.digikey.com/pdf/Data%20Sheets/Diodes%20PDFs/AP3406.pdf [datasheet]]		* U1300:<br>America Techcode Semiconductor [http://techcodesemi.com/datasheet/TD6817.pdf TD6817] 1.5MHz 2A synchronous step-down regulator dropout, SOT23-5 package<br>'''''or'''''<br>Diodes Incorporated [https://media.digikey.com/pdf/Data%20Sheets/Diodes%20PDFs/AP3406.pdf AP3406K-ADJTRG1] buck switching regulator IC positive adjustable 0.6V 650mA [https://media.digikey.com/pdf/Data%20Sheets/Diodes%20PDFs/AP3406.pdf datasheet]
	* U1302:<br>LowPowerSemi [https://cdn.datasheetspdf.com/pdf-down/L/P/W/LPW5206-LowPowerSemi.pdf LPW5206H] USB power loading switch, N-channel MOSFET, SOT23-5 package		* U1302:<br>LowPowerSemi [https://cdn.datasheetspdf.com/pdf-down/L/P/W/LPW5206-LowPowerSemi.pdf LPW5206H] USB power loading switch, N-channel MOSFET, SOT23-5 package
	* U1303:<br>Texas Instruments [https://www.ti.com/lit/ds/symlink/txb0104.pdf TXB0104YZT] 4-bit bidirectional voltage-level translator with automatic direction sensing and ±15-kV ESD protection, 12-pin DSBGA 1.40×1.90 mm		* U1303:<br>Texas Instruments [https://www.ti.com/lit/ds/symlink/txb0104.pdf TXB0104YZT] 4-bit bidirectional voltage-level translator with automatic direction sensing and ±15-kV ESD protection, 12-pin DSBGA 1.40×1.90 mm