PinePhone Modding - Revision history

Fxc: fixes

2023-03-16T03:14:53Z

fixes

← Older revision		Revision as of 03:14, 16 March 2023
Line 6:		Line 6:
	Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.		Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.

	==Laser cut parts==		== Laser cut parts ==
	Mcyam2 has created some laser cut templates for the rear facing components here:		Mcyam2 has created some laser cut templates for the rear facing components here:

Line 15:		Line 15:
	Originally based on silver's work on a 3d printed rear frame		Originally based on silver's work on a 3d printed rear frame

	==3D Printed parts==		== 3D Printed parts ==

	Silver has created a 3D-printable rear frame for the PinePhone and used it to create a folding keyboard design (work in progress), [[User:Silver/3d printed a folding keyboard mostly]].		Silver has created a 3D-printable rear frame for the PinePhone and used it to create a folding keyboard design (work in progress), [[User:Silver/3d printed a folding keyboard mostly]].
Line 23:		Line 23:
	https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup		https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup

	==PCBs==		== PCBs ==

	https://github.com/SMR404/PinephonePogoBreakout		https://github.com/SMR404/PinephonePogoBreakout
Line 29:		Line 29:
	https://github.com/jnavarro7/pinephone_flex_breakout_board_grove		https://github.com/jnavarro7/pinephone_flex_breakout_board_grove

	==Device Specific Mods ==		== Device Specific Mods ==

	There are a number of upgrades possible for the different versions of the PinePhone.		There are a number of upgrades possible for the different versions of the PinePhone.

	=== Braveheart Edition ===		=== Braveheart Edition ===

	{{Warning\|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}		{{Warning\|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}
	*PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
	*VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.		* PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
			* VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.

	==== PMIC mod ====		==== PMIC mod ====

	[[PinePhone_1.1_VBUS_power_usage_Hardware_Fix]]		[[PinePhone_1.1_VBUS_power_usage_Hardware_Fix]]

	The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg		The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg

	==== VCONN mod ====		==== VCONN mod ====

	See below.		See below.

	=== Braveheart Edition and UBPorts Community Edition ===		=== Braveheart Edition and UBPorts Community Edition ===

	{{Warning\|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}		{{Warning\|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}
	*VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.
			* VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.

	There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a number of options to change the screen protector.		There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a number of options to change the screen protector.

Fxc: structure, warnings

2021-09-23T17:35:01Z

structure, warnings

@@ Line 3: / Line 3: @@
 Some are upgrades to fix issues that were not done optimally in the production of that version of the electronics, and some are to add options that were not part of the phone spec.
-== PRO TIP ==
+== General ==
 Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.
 ==Device Specific Mods ==
 There are a number of upgrades possible for the different versions of the PinePhone.
-=== "Don't be evil" ===
+=== Braveheart Edition ===
+{{Warning|These are fixes for hardware bugs for old revisions of the PinePhone (from 2019 and early 2020). They do not apply to current revisions.}}
 *PMIC mod - Stops the battery drain from a shutdown phone, draining the battery to 0V.
 *VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.
-=== UBPorts Community edition ===
+==== PMIC mod ====
 *VCONN mod - Unblocks the USB-C power negotiation rail, so convergence functions are unlocked.
@@ Line 23: / Line 52: @@
 At this moment there are not many pogo addons, and most are just connector boards. Likely the makers will add links to these projects to this page. Pine is looking into adding a N900 style keyboard attached to these pins.
-== PMIC mod ==
+==== VCONN mod ====
 The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-usbc-fix.jpg
 There is a discussion on the merits of the different ways to do the fix
-=== VCONN mod, Removal only ===
+===== VCONN mod, Removal only =====
 [[PinePhone_1.2_VCONN_Hardware_Fix]]
@@ Line 44: / Line 70: @@
 *OK - Firmware Applied, you are all set
-=== VCONN mod, Replacement ===
+===== VCONN mod, Replacement =====
 Using 2x NCP334FCT2G you could do the full fix, making VCONN powered devices able to negotiate power. IT needs the parts to be removed first without damaging the pads, and then replacing the parts.
 [[Category:PinePhone]]

Wibble at 16:11, 7 April 2021

2021-04-07T16:11:24Z

← Older revision		Revision as of 16:11, 7 April 2021
Line 67:		Line 67:

	https://github.com/SMR404/PinephonePogoBreakout		https://github.com/SMR404/PinephonePogoBreakout

	https://github.com/jnavarro7/pinephone_flex_breakout_board_grove		https://github.com/jnavarro7/pinephone_flex_breakout_board_grove

	[[Category:PinePhone]]		[[Category:PinePhone]]

Wibble: add flex breakout pcb link

2021-04-07T16:10:53Z

add flex breakout pcb link

← Older revision		Revision as of 16:10, 7 April 2021
Line 67:		Line 67:

	https://github.com/SMR404/PinephonePogoBreakout		https://github.com/SMR404/PinephonePogoBreakout
			https://github.com/jnavarro7/pinephone_flex_breakout_board_grove

	[[Category:PinePhone]]		[[Category:PinePhone]]

Wibble: Add PCBs section with pogo breakout board

2021-04-07T15:54:18Z

Add PCBs section with pogo breakout board

← Older revision		Revision as of 15:54, 7 April 2021
Line 64:		Line 64:
	https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup		https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup

			==PCBs==

			https://github.com/SMR404/PinephonePogoBreakout

	[[Category:PinePhone]]		[[Category:PinePhone]]

Abcde: typo

2020-10-28T07:45:05Z

typo

← Older revision		Revision as of 07:45, 28 October 2020
Line 4:		Line 4:

	== PRO TIP ==		== PRO TIP ==
	Make pictures of the situation before and after your mods, so you can ~~comare~~ the change, and don't need to disassemble the device to get the right pics later.		Make pictures of the situation before and after your mods, so you can compare the change, and don't need to disassemble the device to get the right pics later.

	==Device Specific Mods ==		==Device Specific Mods ==
	There are a nr of upgrades possible for the different versions of the PinePhone.		There are a number of upgrades possible for the different versions of the PinePhone.

	=== "Don't be evil" ===		=== "Don't be evil" ===

Fxc: /* 3D Printed parts */ link

2020-09-23T15:23:16Z

3D Printed parts: link

← Older revision		Revision as of 15:23, 23 September 2020
Line 58:		Line 58:
	==3D Printed parts==		==3D Printed parts==

	~~[[Silver 3d printed a folding keyboard mostly]]~~		Silver has created a 3D-printable rear frame for the PinePhone and used it to create a folding keyboard design (work in progress), [[User:Silver/3d printed a folding keyboard mostly]].


	Silver has created a 3d printable rear frame for ~~pinephone,~~ and used it to create a folding keyboard design (work in progress).

	https://ibb.co/album/ScDttH		https://ibb.co/album/ScDttH

Jbit: Add to PinePhone category

2020-09-02T10:09:00Z

Add to PinePhone category

← Older revision		Revision as of 10:09, 2 September 2020
Line 66:		Line 66:

	https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup		https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup


			[[Category:PinePhone]]

Abcde: added new page

2020-08-17T14:58:58Z

added new page

← Older revision		Revision as of 14:58, 17 August 2020
Line 24:		Line 24:

	== PMIC mod ==		== PMIC mod ==
			[[PinePhone_1.1_VBUS_power_usage_Hardware_Fix]]
	The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg		The original description of this fix is given on megi's pager here https://xnux.eu/devices/pp-pmic-fix.jpg
	== VCONN mod ==		== VCONN mod ==

Silver at 02:35, 11 August 2020

2020-08-11T02:35:20Z

← Older revision		Revision as of 02:35, 11 August 2020
Line 56:		Line 56:

	==3D Printed parts==		==3D Printed parts==

			[[Silver 3d printed a folding keyboard mostly]]


	Silver has created a 3d printable rear frame for pinephone, and used it to create a folding keyboard design (work in progress).		Silver has created a 3d printable rear frame for pinephone, and used it to create a folding keyboard design (work in progress).