PinePhone (Pro) Add-ons - Revision history

Fxc: /* Credit */ fiox

2023-03-16T00:36:52Z

Credit: fiox

← Older revision		Revision as of 00:36, 16 March 2023
Line 65:		Line 65:
	{{note\|No PinePhone operating system has added support for the fingerprint reader yet.}}		{{note\|No PinePhone operating system has added support for the fingerprint reader yet.}}

	=== ~~Credit~~ ===		=== Credits ===

	Credit goes to the user ''zschroeder6212'', who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.		Credit goes to the user ''zschroeder6212'', who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.

Fxc: Style fix

2023-03-16T00:36:39Z

Style fix

← Older revision		Revision as of 00:36, 16 March 2023
Line 1:		Line 1:
	= Keyboard =		== Keyboard ==

	''Main article: [[PinePhone (Pro) Keyboard]]''		''Main article: [[PinePhone (Pro) Keyboard]]''
Line 9:		Line 9:
	Store page: [https://pine64.com/product/pinephone-pinephone-pro-keyboard-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-keyboard-case/ pine64.com]

	= LoRa Add-on =		== LoRa Add-on ==

	Store page: [https://pine64.com/product/pinephone-pinephone-pro-pindio-lora-add-on-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-pindio-lora-add-on-case/ pine64.com]
Line 19:		Line 19:
	{{note\|Software for receiving and sending LoRa messages with this back cover does exist, however no PinePhone operating system has added support for it yet.}}		{{note\|Software for receiving and sending LoRa messages with this back cover does exist, however no PinePhone operating system has added support for it yet.}}

	== Schematics and Datasheet ==		=== Schematics and Datasheet ===

	* Schematic:		Schematic:
	** [https://files.pine64.org/doc/PinePhone/Pinephone%20LoRa%20Back%20Cover%20Panel%20Schematic-v1.0-20210425.pdf PinePhone LoRa Back Cover Schematic ver 1.0 20210425]		* [https://files.pine64.org/doc/PinePhone/Pinephone%20LoRa%20Back%20Cover%20Panel%20Schematic-v1.0-20210425.pdf PinePhone LoRa Back Cover Schematic ver 1.0 20210425]

	* Datasheet:		Datasheet:
	** [https://files.pine64.org/doc/datasheet/pinephone/DS_SX1261-2_V1.1-1307803.pdf SX1262 Long Range, Low Power, sub-GHz RF Transceiver Datasheet]		* [https://files.pine64.org/doc/datasheet/pinephone/DS_SX1261-2_V1.1-1307803.pdf SX1262 Long Range, Low Power, sub-GHz RF Transceiver Datasheet]
	** [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]		* [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]

	* i2c to SPI firmware *		I2C to SPI firmware:
	** [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]		* [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]

	= Qi Wireless Charging Add-on =		== Qi Wireless Charging Add-on ==

	Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]
Line 45:		Line 45:
	Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.		Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.

	== Schematics and Datasheet ==		=== Schematics and Datasheet ===

	* Schematic:		Schematic:
	** [https://files.pine64.org/doc/PinePhone/PinePhone%20Q-Wireless%20Charger%20Back%20Cover%20Schematic-20210508.pdf PinePhone Wireless Charger Back Cover Schematic ver 1.0 20210508]

	* Datasheet:		* [https://files.pine64.org/doc/PinePhone/PinePhone%20Q-Wireless%20Charger%20Back%20Cover%20Schematic-20210508.pdf PinePhone Wireless Charger Back Cover Schematic ver 1.0 20210508]
	** [https://files.pine64.org/doc/~~datasheet~~/~~pinephone/HL6111RFNWP5_V1p0_20190121~~.pdf ~~HL6111RFNWP5 5W WPC~~ Wireless ~~Power Receiver Datasheet~~]

	= Fingerprint Reader Add-on =		Datasheet:

			* [https://files.pine64.org/doc/datasheet/pinephone/HL6111RFNWP5_V1p0_20190121.pdf HL6111RFNWP5 5W WPC Wireless Power Receiver Datasheet]

			== Fingerprint Reader Add-on ==

	Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]
Line 63:		Line 65:
	{{note\|No PinePhone operating system has added support for the fingerprint reader yet.}}		{{note\|No PinePhone operating system has added support for the fingerprint reader yet.}}

	== Credit ==		=== Credit ===

	Credit goes to the user ''zschroeder6212'', who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.		Credit goes to the user ''zschroeder6212'', who carried the PinePhone Fingerprint Cover project from an idea to a real product. Their progress can be followed on GitHub under https://github.com/zschroeder6212.

	== Schematics and Datasheet ==		=== Schematics and Datasheet ===

			Schematic:

			* [https://files.pine64.org/doc/PinePhone/Schematic_fingerprint%20driver%20board%20V3_2021-01-24.pdf PinePhone Finger Print Back Cover Schematic ver 3.0 20210124]

			Datasheet:

	* ~~Schematic~~:		* [https://files.pine64.org/doc/datasheet/pinephone/Datasheet_PixelAuth_PIA_Module_P2SDS-NABL2-S05_V7.0.0.5.pdf P2SD Personal Identity Authentication Module Datasheet]
	** [https://files.pine64.org/doc/~~PinePhone~~/~~Schematic_fingerprint~~%~~20driver~~%~~20board~~%~~20V3_2021-01-24~~.pdf ~~PinePhone Finger Print Back Cover Schematic ver 3.0 20210124~~]		* [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]

	* Datasheet:		I2C to SPI firmware:
	** [https://files.pine64.org/doc/datasheet/pinephone/Datasheet_PixelAuth_PIA_Module_P2SDS-NABL2-S05_V7.0.0.5.pdf P2SD Personal Identity Authentication Module Datasheet]
	** [https://files.pine64.org/doc/datasheet/pinephone/ATmel%20ATTiny%20Microcontroller%20Datasheet.pdf ATmel ATtiny Microcontroller Datasheet]

	~~* i2c to SPI firmware *~~		* [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]
	** [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]

	[[Category:PinePhone]]		[[Category:PinePhone]]
	[[Category:PinePhone Pro]]		[[Category:PinePhone Pro]]
	[[Category:PinePhone (Pro) Add-Ons]]		[[Category:PinePhone (Pro) Add-Ons]]

Fxc: +cat

2023-02-20T14:00:24Z

+cat

← Older revision		Revision as of 14:00, 20 February 2023
Line 78:		Line 78:
	* i2c to SPI firmware *		* i2c to SPI firmware *
	** [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]		** [https://github.com/zschroeder6212/tiny-i2c-spi zschroeder6212's tiny-i2c-spi Github page]

			[[Category:PinePhone]]
			[[Category:PinePhone Pro]]
			[[Category:PinePhone (Pro) Add-Ons]]

Fxc: fix

2023-01-15T11:23:36Z

fix

← Older revision		Revision as of 11:23, 15 January 2023
Line 3:		Line 3:
	''Main article: [[PinePhone (Pro) Keyboard]]''		''Main article: [[PinePhone (Pro) Keyboard]]''

	The keyboard case works with both the PinePhone and PinePhone Pro and features a clam-shell design. It uses pogo pins located on the phone’s midsection and attaches by replacing the default back cover. When folded, the phone’s screen and the keyboard rest securely against each other. The hinge features a 180° design, which not only allows for two-hand typing on a surface but also for comfortable thumb-typing when fully extended. The etched keycaps can be easily relocated for alternate layouts such as AZERTY or QWERTZ. The keyboard case runs an [https://xff.cz/git/pinephone-keyboard/ open firmware], which means that anyone with the know-how can alter existing functions or add new ones. The bottom (keyboard) and top (phone) sections of the assembly are well-balanced thanks to the large, 6000mAh, internal battery capable of charging the PinePhone (Pro) during operation. The internal battery effectively triples the phone’s battery life. The internal keyboard battery can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported ~~OSes~~; the keyboard remains functional with the battery fully depleted.		The keyboard case works with both the PinePhone and PinePhone Pro and features a clam-shell design. It uses pogo pins located on the phone’s midsection and attaches by replacing the default back cover. When folded, the phone’s screen and the keyboard rest securely against each other. The hinge features a 180° design, which not only allows for two-hand typing on a surface but also for comfortable thumb-typing when fully extended. The etched keycaps can be easily relocated for alternate layouts such as AZERTY or QWERTZ. The keyboard case runs an [https://xff.cz/git/pinephone-keyboard/ open firmware], which means that anyone with the know-how can alter existing functions or add new ones. The bottom (keyboard) and top (phone) sections of the assembly are well-balanced thanks to the large, 6000mAh, internal battery capable of charging the PinePhone (Pro) during operation. The internal battery effectively triples the phone’s battery life. The internal keyboard battery can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional with the battery fully depleted.

	You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.		You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.

Fxc: /* Qi Wireless Charging Add-on */ made it more visible

2022-06-01T21:35:56Z

Qi Wireless Charging Add-on: made it more visible

← Older revision		Revision as of 21:35, 1 June 2022
Line 35:		Line 35:
	Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]

	~~[[File~~:~~PinePhone~~-~~Wireless-charger~~.~~jpg\|250px\|Picture of~~ the ~~PinePhone (Pro) wireless charging add~~-~~on]]~~		{{warning\|Possible safety hazard: If the wireless charging chip fails for some reason, do not plug the phone in to charge via USB-C. Take the back case off first. It is possible that power gets fed into the chip, causing it to overheat, possibly causing damage to the phone and creating a fire-hazard.

	~~Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required~~.		Album of damage caused by reverse current: [https://imgur.com/a/dJsp5wD]

	~~== Possible Safety Hazard ==~~		Until the cause of this is determined, it is recommended NOT to use the wireless charging add-on.}}

	If the wireless charging ~~chip fails for some reason, do not plug the phone in to charge via USB~~-~~C. Take the back case off first. It is possible that power gets fed into the chip, causing it to overheat, possibly causing damage to the phone and creating a fire-hazard.~~		[[File:PinePhone-Wireless-charger.jpg\|250px\|Picture of the PinePhone (Pro) wireless charging add-on]]

	~~Album of damage caused by reverse current: [https://imgur.com/a/dJsp5wD]~~		Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.

	~~Until~~ the ~~cause of this is determined, it is recommended NOT~~ to ~~use the wireless~~ charging ~~add-on~~.

	== Schematics and Datasheet ==		== Schematics and Datasheet ==

MungFuSensei: /* Qi Wireless Charging Add-on */

2022-06-01T21:33:28Z

Qi Wireless Charging Add-on

← Older revision		Revision as of 21:33, 1 June 2022
Line 38:		Line 38:

	Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.		Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.

			== Possible Safety Hazard ==

			If the wireless charging chip fails for some reason, do not plug the phone in to charge via USB-C. Take the back case off first. It is possible that power gets fed into the chip, causing it to overheat, possibly causing damage to the phone and creating a fire-hazard.

			Album of damage caused by reverse current: [https://imgur.com/a/dJsp5wD]

			Until the cause of this is determined, it is recommended NOT to use the wireless charging add-on.

	== Schematics and Datasheet ==		== Schematics and Datasheet ==

Fxc: + links

2022-05-25T20:25:01Z

+ links

← Older revision		Revision as of 20:25, 25 May 2022
Line 6:		Line 6:

	You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.		You do not lose access to the PinePhone (Pro)’s USB-C port, speaker, microphone, or any external features, such as volume and lock buttons, with the keyboard attached. There is also a cut-out for the camera, torch, and headphone jack. The USB-C port on the keyboard is capable of powering both the keyboard and PinePhone (Pro) simultaneously. This means that you can plug in a USB mouse, a USB-C dongle, or some other peripheral while the phone and keyboard’s internal battery charge. Please keep in mind that the keyboard case transforms the PinePhone (Pro) into a PDA, which means that taking calls will likely prove awkward without a wired or wireless headset connected.

			Store page: [https://pine64.com/product/pinephone-pinephone-pro-keyboard-case/ pine64.com]

	= LoRa Add-on =		= LoRa Add-on =

			Store page: [https://pine64.com/product/pinephone-pinephone-pro-pindio-lora-add-on-case/ pine64.com]

	[[File:PP LoRa.jpg\|250px\|Picture of the PinePhone (Pro) LoRa add-on]]		[[File:PP LoRa.jpg\|250px\|Picture of the PinePhone (Pro) LoRa add-on]]
Line 28:		Line 32:

	= Qi Wireless Charging Add-on =		= Qi Wireless Charging Add-on =

			Store page: [https://pine64.com/product/pinephone-pinephone-pro-wireless-charging-add-on-case/ pine64.com]

	[[File:PinePhone-Wireless-charger.jpg\|250px\|Picture of the PinePhone (Pro) wireless charging add-on]]		[[File:PinePhone-Wireless-charger.jpg\|250px\|Picture of the PinePhone (Pro) wireless charging add-on]]
Line 42:		Line 48:

	= Fingerprint Reader Add-on =		= Fingerprint Reader Add-on =

	Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]		Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]

Fxc: /* Fingerprint Reader Add-on */ +link

2022-05-25T20:23:50Z

Fingerprint Reader Add-on: +link

← Older revision		Revision as of 20:23, 25 May 2022
Line 42:		Line 42:

	= Fingerprint Reader Add-on =		= Fingerprint Reader Add-on =
			Store page: [https://pine64.com/product/pinephone-pinephone-pro-fingerprint-reader-add-on-case/ pine64.com]

	[[File:PinePhone-FP-Addon.jpg\|250px\|Picture of the PinePhone (Pro) fingerprint reader add-on]]		[[File:PinePhone-FP-Addon.jpg\|250px\|Picture of the PinePhone (Pro) fingerprint reader add-on]]

Fxc: Image removed as too close to the keyboard wiki page -> can cause confusion

2022-01-27T14:06:41Z

Image removed as too close to the keyboard wiki page -> can cause confusion

← Older revision		Revision as of 14:06, 27 January 2022
Line 1:		Line 1:
	~~[[File:PP_KB_Front-1024x576.jpg\|400px\|thumb\|right\|Picture of the PinePhone (Pro) Keyboard]]~~

	= Keyboard =		= Keyboard =

Fxc: fixed newlines

2022-01-27T11:16:28Z

fixed newlines

← Older revision		Revision as of 11:16, 27 January 2022
Line 34:		Line 34:

	Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.		Uses the pogo pins to supply Qi Wireless and Wireless Power Consortium compatible charging. No software required.


	== Schematics and Datasheet ==		== Schematics and Datasheet ==
Line 43:		Line 42:
	* Datasheet:		* Datasheet:
	** [https://files.pine64.org/doc/datasheet/pinephone/HL6111RFNWP5_V1p0_20190121.pdf HL6111RFNWP5 5W WPC Wireless Power Receiver Datasheet]		** [https://files.pine64.org/doc/datasheet/pinephone/HL6111RFNWP5_V1p0_20190121.pdf HL6111RFNWP5 5W WPC Wireless Power Receiver Datasheet]



	= Fingerprint Reader Add-on =		= Fingerprint Reader Add-on =