View source for User:Pfeerick/Pfeerick-scratch-page

<table class="infobox" style="width:22em;float:right;" cellspacing="5">
<tr><th colspan="2" class="" style="text-align:center; font-size:125%; font-weight:bold; background: #dedede;">Pinecube</th></tr>
<th scope="row" style="text-align:left;">CPU</th><td class="" style="">Allwinner(Sochip) ARM Cortex-A7 MPCore, 800MHz</td></tr>
<tr class=""><th scope="row" style="text-align:left;">RAM</th><td class="" style="">128MB DDR3</td></tr>
<tr class=""><th scope="row" style="text-align:left;">CPU</th><td class="" style="">Quad-Core ARM Cortex-A53</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Camera</th><td class="" style="">OV5640, 5Mpx</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Storage</th><td class="" style="">MicroSD slot, bootable</br>128Mb SPI Nor Flash, bootable</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Dimensions</th><td class="" style="">55mm x 51mm x 51.5mm</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Network</th><td class="" style="">WiFi</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Screen</th><td class="" style="">optional 4.5" RGB LCD screen</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Misc</th><td class="" style="">Volume and home buttons</br>Speakers and microphone</td></tr>

<tr><th colspan="2" class="" style="text-align:center; background: #dedede;">Power</th></tr>
<tr class=""><th scope="row" style="text-align:left;">MicroUSB/GPIO</th><td class="" style="">5V 1A </td></tr>
<tr class=""><th scope="row" style="text-align:left;">PoE</th><td class="" style="">4V-18V</td></tr>
<tr class=""><th scope="row" style="text-align:left;">Battery</th><td class="" style="">optional 950-1600mAh</td></tr>
</table>


== General ==

General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 
General waffle about the Pinecube. some pretty pictures. enough junk to push the gpio section down a bit. 


== I/O ==
* GPIO Header Pinout: ([[:File:PineCube_GPIO.pdf|PDF]], [https://pine64.gami.ee/pinecube/gpio-pinout.html HTML])
[[File:PineCube_GPIO_Pinout.png|right|300px]]

** 10/100Mbps Ethernet with passive PoE
** USB 2.0 A host
** 26 pins GPIO port
*** 2x 3.3V Ouptut
*** 2x 5V Output
*** 1x I2C
*** 2x UART
*** 2x PWM
*** 1x SPI
*** 1x eMMC/SDIO/SD (8-bit)
*** 6x Interrupts
*** '''Note: Interfaces are multiplexed, so they can't be all used at same time'''
** Internal microphone


== Power ==
** 5V 1A from MicroUSB Port or GPIO port
** 4V-18V from Ethernet passive PoE
* '''Battery:''' optional 950-1600mAh model: 903048 Lithium Polymer Ion Battery Pack, can be purchase at [https://www.amazon.com/AKZYTUE-1200mAh-Battery-Rechargeable-Connector/dp/B07TWHHCNK/ Amazon.com]

== PineCube board information, schematics and certifications ==
* PineCube mainboard schematic:
** [http://files.pine64.org/doc/PineCube/PineCube%20MainBoard%20Schematic%20ver%201.0-20200727.pdf PineCube mainboard Released Schematic ver 1.0]
* PineCube faceboard schematic:
** [http://files.pine64.org/doc/PineCube/PineCube%20FaceBoard%20Schematic%20ver%201.0-20200727.pdf PineCube faceboard Released Schematic ver 1.0]
* PineCube certifications:



== Datasheets for components and peripherals ==
* Allwinner (Sochip) S3 SoC information:
** [http://files.pine64.org/doc/datasheet/pinecube/S3_Datasheet_V1.1-20180123.pdf Sochip S3 SoC Data Sheet V1.1]

* X-Powers AXP209 PMU (Power Management Unit) information:
** [http://files.pine64.org/doc/datasheet/pinecube/AXP209_Datasheet_v1.0en.pdf AXP209 PMIC datasheet]

* CMOS camera module information:
** [http://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OV5640 5MP CMOS Image Sensor SoC datasheet]

* LCD touch screen panel information:

* Lithium battery information:

* WiFi/BT module information:
** [http://files.pine64.org/doc/datasheet/pinecube/rtl8189es.pdf RTL8189ES specification]


== Operating Systems ==

=== Mainlining Efforts ===


{| class="wikitable"
!colspan="3"|Linux kernel
|-
| Type
| Link
| Available in version
|-
| Devicetree Entry Pinecube
| https://lkml.org/lkml/2020/9/22/1241
| expected in 5.10
|-
| Correction for AXP209 driver
| https://lkml.org/lkml/2020/9/22/1243
| 5.9
|-
!colspan="3"|U-boot
|-
|
|
|
|-
!colspan="3"|Buildroot
|-
|
|
|
|}


=== Stock Linux ===




== SDK ==

==== Stock Linux ====
* [http://files.pine64.org/SDK/PineCube/PineCube%20Stock%20BSP-SDK%20ver1.0.7z Direct Download from pine64.org]
** MD5 (7zip file): efac108dc98efa0a1f5e77660ba375f8
** File Size: 3.50GB
===== How to compile =====

Recommended system requirements:
* OS: (L)Ubuntu 16.04
* CPU: 64-bit based
* Memory: 8 GB or higher
* Disk: 15 GB free hard disk space

'''Install required packages'''
<pre>
sudo apt-get install p7zip-full git make u-boot-tools libxml2-utils bison build-essential gcc-arm-linux-gnueabi g++-arm-linux-gnueabi zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32z1-dev
</pre>
'''Install older Make 3.82 and Java JDK 6'''
<pre>
pushd /tmp
wget https://ftp.gnu.org/gnu/make/make-3.82.tar.gz
tar xfv make-3.82.tar.gz
cd make-3.82
./configure
make
sudo apt purge -y make
sudo ./make install
cd ..
# Please, download jdk-6u45-linux-x64.bin from https://www.oracle.com/java/technologies/javase-java-archive-javase6-downloads.html (requires free login)
chmod +x jdk-6u45-linux-x64.bin 
./jdk-6u45-linux-x64.bin 
sudo mkdir /opt/java/
sudo mv jdk1.6.0_45/ /opt/java/
sudo update-alternatives --install /usr/bin/javac javac /opt/java/jdk1.6.0_45/bin/javac 1
sudo update-alternatives --install /usr/bin/java java /opt/java/jdk1.6.0_45/bin/java 1
sudo update-alternatives --install /usr/bin/javaws javaws /opt/java/jdk1.6.0_45/bin/javaws 1
sudo update-alternatives --config javac
sudo update-alternatives --config java
sudo update-alternatives --config javaws
popd
</pre>
'''Unpack SDK and then compile and pack the image'''
<pre>
7z x 'PineCube Stock BSP-SDK ver1.0.7z'
mv 'PineCube Stock BSP-SDK ver1.0' pinecube-sdk
cd pinecube-sdk/camdroid
source build/envsetup.sh
lunch
mklichee
make -j3
pack
</pre>

[[Category:PineCube]] [[Category:Allwinner(Sochip) S3]]