PINE64 - User contributions [en]

ROCKPro64 Hardware compatibility

2022-12-02T19:49:56Z

GreenwoodProjects: Added entry for BEYIMEI SATA Card 2-Port, ASM1062 chip

= ROCKPro64 accessories - by type =

== PCIe devices ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
| NIC || Intel I350 Dual Port || || Mainline-5.4 || style="background:PaleGreen;" | good || SR-IOV fails
|-
| NIC || Intel I350 Quad Port || || || ? ||
|-
| NIC || Intel X520 Dual Port || 8086:10fb || Mainline-5.6 || style="background:PaleGreen;" | good || SR-IOV fails
|-
| NIC || Intel X550-T2 Dual Port || 8086:1563 || 5.15.0-trunk-arm64 (Debian) || style="background:PaleGreen;" | good || netperf throughput in FW mode, 20 streams: between 4136-6613mb/s across use cases.
|-
| NIC || Intel 82571EB Dual Port (HP NC360T) || || Mainline-5.6 || style="background:#F99;" | crash || kernel crash on boot
|-
| NIC || Intel 82575/82576 || 8086:1521 || OpenWrt 21.02-rc1 ; 5.4.111-1 || style="background:PaleGreen;" | good ||opkg: kmod-igb ; [https://wiki.pine64.org/wiki/ROCKPro64_Software_Release#OpenWrt_21.02 OpenWrt 21.02-rc1] 5.4.111-1 ; ~92.8 KB ; Kernel modules for Intel(R) 82575/82576 PCI-Express Gigabit Ethernet adapters.
|-
| NIC || Aquantia 10GBps AQC107 || 1d6a:07b1 || Mainline 5.16 || style="background:PaleGreen;" | good || Works perfectly out of the box.
|-
| GPU || nVidia GTX-645 || || Mainline-5.4 || style="background:#F99;" | crash || BAR size too small, triggers PCIe error handling bug
|-
| PCIe Switch || PCIE-EUX1-04 Ver.002 || || Mainline-5.4 || style="background:PaleGreen;" | good ||
|-
| SATA Controller || ASM1062 4-Port || || Mainline-5.6 || style="background:PaleGreen;" | good || tested only with one disk attached
|-hw
| SATA Controller || ASM1062 (rev 02) 4-Port ||1d87:0100|| Ayufan-4.4.190 || style="background:PaleGreen;" | good || tested with four disks, 3 in raid 5
|-
| SATA Controller || IOCrest (Same as Syba?) SI-PEX40063 4-port, Marvell 88SE9235 chip || 1b4b:9235 || Debian unstable 5.7, 5.8 || style="background:PaleGreen;" | good || Tested with two disks. SATA errors occurred with a WD Red drive in a cheap enclosure; resolved by connecting the same drive directly to the card.
|-
| SATA Controller || Ziyituod SATA Card ASM 1062+1093 6-Port || 1b21:0625 || Mainline-4.4 (armbian) || style="background:PaleGreen;" | good || tested with 6 disks ||
|-
| SATA Controller || BEYMEI RAID 4-Port, Marvell 88SE9230 chip || 1b4b:9230 || Ayufan-5.6.0-1137 || style="background:PaleGreen;" | good || Tested with 3 disks in RAID 5. I added pci=nomsi to /boot/extlinux/extlinux.conf kernel parameters and an udev rule before the disks were recognized: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'"
|-
| SATA Controller || BEYIMEI SATA Card 6-Port, ASM1166 chip || || 5.10.0-16-arm64 (Debian) || style="background:PaleGreen;" | good || Tested with 4 disks. Built 2 separate software RAID-1 arrays without errors. Performance seems good enough for a NAS on gigabit LAN.
|-
| SATA Controller || BEYIMEI SATA Card 2-Port, ASM1062 chip || 1b21:0612 || 5.10.0-19-arm64 (Debian) || style="background:PaleGreen;" | good || Using with 2 SSDs in a software RAID-1 array (~190MB/sec for reading and writing)
|-
| SATA Controller || QNINE 4-Port, Marvell 88SE9215 chip || || Ayufan-5.6.0-1137 || style="background:LightYellow;" | very slow || Tested with 3 disks in RAID 5. Top speeds were around 50 MiB/s but quickly dropped to below 2 MiB/s due to SATA CRC errors
|-
| SATA Controller || DELOCK 90498, JMicron Technology Corp. JMB58x AHCI SATA controller || 197b:0585 || 5.18.0-0.bpo.1-arm64 (Debian bullseye + backports) || style="background:PaleGreen;" | good || Tested with 3 disks, two in RAID1, one standalone, no issues
|-
| Host Bus Adapter || LSI SAS 9211-4i || 1000:0070 || Ayufan-4.4.197 || style="background:PaleGreen;" | good || tested with four disks attached
|-
| USB Controller || ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller || 1b21:1242 || Mainline-5.15.0-rc5 || style="background:PaleGreen;" | good ||
|-
| DTMB Quad Tuner || TBS Technologies || TSS6514 || Mainline-5.10.21 || style="background:PaleGreen;" | good || TV -> LAN streaming server, 7W idle, 8-10W with one FHD channel streaming
|-
| DVB-T2/C Quad Tuner || TBS Technologies || TBS6205 || 5.10.0-16-arm64 (Debian) || style="background:PaleGreen;" | good || Working well with Tvheadend
|}

== NVMe SSD drives ==
{| class="wikitable sortable"
!Type || Make/Model || Size || Hardware IDs || Kernel || Result || Notes || Power options Active only || Save power setting?
|-
| NVMe || Samsung 970 Evo || 500 GB || || Mainline 5.6 || style="background:PaleGreen;" | good || - || defaults || defaults
|-
| NVMe || Samsung 960 Evo || 500 GB || 144d:a804 || Mainline 5.13-rc4 || style="background:#F99;" | doesn't work || Likely due to 64/32 BAR mismatch issue on Linux 5.11+ || defaults || defaults
|}

== USB hardware ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}

== USB C alternate mode DP ==
Note that only USB C alternate mode Display Port will pass video. Any HDMI, DVI or VGA port must be converted internally by the device from Display Port - or the device won't work for video.
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}

== Other hardware ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}
[[Category:ROCKPro64]]

ROCKPro64 Hardware compatibility

2022-07-25T22:34:44Z

GreenwoodProjects: /* PCIe devices */

= ROCKPro64 accessories - by type =

== PCIe devices ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
| NIC || Intel I350 Dual Port || || Mainline-5.4 || style="background:PaleGreen;" | good || SR-IOV fails
|-
| NIC || Intel I350 Quad Port || || || ? ||
|-
| NIC || Intel X520 Dual Port || 8086:10fb || Mainline-5.6 || style="background:PaleGreen;" | good || SR-IOV fails
|-
| NIC || Intel X550-T2 Dual Port || 8086:1563 || 5.15.0-trunk-arm64 (Debian) || style="background:PaleGreen;" | good || netperf throughput in FW mode, 20 streams: between 4136-6613mb/s across use cases.
|-
| NIC || Intel 82571EB Dual Port (HP NC360T) || || Mainline-5.6 || style="background:#F99;" | crash || kernel crash on boot
|-
| NIC || Intel 82575/82576 || 8086:1521 || OpenWrt 21.02-rc1 ; 5.4.111-1 || style="background:PaleGreen;" | good ||opkg: kmod-igb ; [https://wiki.pine64.org/wiki/ROCKPro64_Software_Release#OpenWrt_21.02 OpenWrt 21.02-rc1] 5.4.111-1 ; ~92.8 KB ; Kernel modules for Intel(R) 82575/82576 PCI-Express Gigabit Ethernet adapters.
|-
| NIC || Aquantia 10GBps AQC107 || 1d6a:07b1 || Mainline 5.16 || style="background:PaleGreen;" | good || Works perfectly out of the box.
|-
| GPU || nVidia GTX-645 || || Mainline-5.4 || style="background:#F99;" | crash || BAR size too small, triggers PCIe error handling bug
|-
| PCIe Switch || PCIE-EUX1-04 Ver.002 || || Mainline-5.4 || style="background:PaleGreen;" | good ||
|-
| SATA Controller || ASM1062 4-Port || || Mainline-5.6 || style="background:PaleGreen;" | good || tested only with one disk attached
|-hw
| SATA Controller || ASM1062 (rev 02) 4-Port ||1d87:0100|| Ayufan-4.4.190 || style="background:PaleGreen;" | good || tested with four disks, 3 in raid 5
|-
| SATA Controller || IOCrest (Same as Syba?) SI-PEX40063 4-port, Marvell 88SE9235 chip || 1b4b:9235 || Debian unstable 5.7, 5.8 || style="background:PaleGreen;" | good || Tested with two disks. SATA errors occurred with a WD Red drive in a cheap enclosure; resolved by connecting the same drive directly to the card.
|-
| SATA Controller || Ziyituod SATA Card ASM 1062+1093 6-Port || 1b21:0625 || Mainline-4.4 (armbian) || style="background:PaleGreen;" | good || tested with 6 disks ||
|-
| SATA Controller || BEYMEI RAID 4-Port, Marvell 88SE9230 chip || 1b4b:9230 || Ayufan-5.6.0-1137 || style="background:PaleGreen;" | good || Tested with 3 disks in RAID 5. I added pci=nomsi to /boot/extlinux/extlinux.conf kernel parameters and an udev rule before the disks were recognized: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'"
|-
| SATA Controller || BEYIMEI SATA Card 6-Port, ASM1166 chip || || 5.10.0-16-arm64 (Debian) || style="background:PaleGreen;" | good || Tested with 4 disks. Built 2 separate software RAID-1 arrays without errors. Performance seems good enough for a NAS on gigabit LAN.
|-
| SATA Controller || QNINE 4-Port, Marvell 88SE9215 chip || || Ayufan-5.6.0-1137 || style="background:LightYellow;" | very slow || Tested with 3 disks in RAID 5. Top speeds were around 50 MiB/s but quickly dropped to below 2 MiB/s due to SATA CRC errors
|-
| Host Bus Adapter || LSI SAS 9211-4i || 1000:0070 || Ayufan-4.4.197 || style="background:PaleGreen;" | good || tested with four disks attached
|-
| USB Controller || ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller || 1b21:1242 || Mainline-5.15.0-rc5 || style="background:PaleGreen;" | good ||
|-
| DTMB Quad Tuner || TBS Technologies || TSS6514 || Mainline-5.10.21 || style="background:PaleGreen;" | good || TV -> LAN streaming server, 7W idle, 8-10W with one FHD channel streaming
|-
| DVB-T2/C Quad Tuner || TBS Technologies || TBS6205 || 5.10.0-16-arm64 (Debian) || style="background:PaleGreen;" | good || Working well with Tvheadend
|}

== NVMe SSD drives ==
{| class="wikitable sortable"
!Type || Make/Model || Size || Hardware IDs || Kernel || Result || Notes || Power options Active only || Save power setting?
|-
| NVMe || Samsung 970 Evo || 500 GB || || Mainline 5.6 || style="background:PaleGreen;" | good || - || defaults || defaults
|-
| NVMe || Samsung 960 Evo || 500 GB || 144d:a804 || Mainline 5.13-rc4 || style="background:#F99;" | doesn't work || Likely due to 64/32 BAR mismatch issue on Linux 5.11+ || defaults || defaults
|}

== USB hardware ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}

== USB C alternate mode DP ==
Note that only USB C alternate mode Display Port will pass video. Any HDMI, DVI or VGA port must be converted internally by the device from Display Port - or the device won't work for video.
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}

== Other hardware ==
{| class="wikitable sortable"
!Type || Make/Model || Hardware IDs || Kernel || Result || Notes
|-
|}
[[Category:ROCKPro64]]