Search results

| SPI-MOSI || PC3 || 67 || SPI0_MOSI || SDC2_D0 || | SPI-MISO || PC0 || 64 || SPI0_MISO || SDC2_CLK ||

...non-volatile storage components, the eMMC and the SPI. The capacity of the SPI is 128Mbit (16MiB) and it may be used in the boot process. Boot data can be written to the SPI via two methods: either from within PBP or from a second machine connected

...zlcsc/2005251035_XTX-XT25F32BSOIGU-S_C558851.pdf XT25F32B SPI NOR external flash] with 4096kB. Internal flash (512Kb):

* Storage Memory: 128Mb SPI Flash and optional eMMC module from 16GB up to 128GB SPI NOR Flash information:

Partitions on a storage (disk of flash memory) have different sizes depending on the type of data they contain. Si ...must be out of the own OS code in order to keep organized the data on the flash memory.

* Storage Memory: PINE H64 boards have built-in 128Mb SPI Flash memory, use '''bootable eMMC module''', '''bootable microSD Cards''' or USB SPI NOR Flash information:

* Storage Memory: SPI Flash and optional eMMC module from 16GB up to 64GB SPI NOR Flash information:

* Storage Memory: SPI Flash and optional eMMC module from 16GB up to 64GB SPI NOR Flash information:

# loading from NOR flash on SPI1 # loading from NAND flash on SPI1

...GPIO bus as well as many other peripheral device interfaces such as UART, SPI, and I²C. * Storage Memory: PINE H64 boards have built-in 128Mb SPI Flash memory, use '''bootable eMMC module''', '''bootable microSD Cards''' or USB

...te how to move rootfs to an NVMe disk.] This is useful until we get a full SPI option to boot from the NVMe. It is possible to flash the SPI to extend the options for boot devices to USB drives or PXE. The preferred

...ssues/1424 Report]</sup>. '''Note:''' Tow-Boot is now pre-installed on the SPI from the factory - issues need verification to be issues with Tow-Boot. | <code>SPI</code>

...Drive, eMMC, or even NVMe if your U-Boot supports it (example Tow-Boot on SPI). ...you want to use something else. If you already have Tow-Boot installed via SPI, you can skip this step. Use fdisk to create a blank GPT partition table. '

* an SD card or eMMC module for U-Boot (advanced users may use the SPI flash on Model B) The first step is to flash U-Boot to our first device, either an SD card or an eMMC module. U-Boot her

...led PineTime, flash only tested PineTime Firmware to your PineTime. If you flash unknown PineTime Firmware, your sealed PineTime may be bricked relatively p The back cover of the PineTime devkit is exposed so that you can flash and debug the device with the SWD pins. The main unit and cover does not sn

[[PineTime Devkit Wiring|Wire it up]] and then [[Reprogramming the PineTime| flash something]]. * Disable all '''peripheral inside the MCU''' when you don't need them (SPI, TWI(I²C),...). The power management of the NRF52832 is very smart and wil

** Display redraw is currently bottlenecked by the nRF52832 maximum SPI clock (8MHz). ** The nRF528(33/40) has one high speed SPI master which supports 32MHz, still well below the ST7789 maximum

* '''Flash:''' 512KB with additional 4MB SPI NOR | SPI clock

* Storage Memory: 128Mb SPI Flash and optional eMMC module from 16GB up to 128GB * TP - Touch Panel Port, SPI with interrupt

...99-pinephone-pro/INSTALL. Please note that loader and userspace utility to flash it are free, but not open-source. === Flash rk2Aw loader to SPI ===

...USB-C port and switch the white switch to its "ON" position to bypass eMMC/SPI boot. This tries to boot from SD, and if no SD is inserted, enters Maskrom ==== Is there SPI Flash? ====

...tions [https://www.raymond.cc/blog/test-and-detect-fake-or-counterfeit-usb-flash-drives-bought-from-ebay-with-h2testw/ Test and Detect Fake Cards] * A disk image utility (used to flash the .img to your SD card). We recommend you use either the [https://etcher.

! scope="row" | SPI | <code>spi-rockchip</code>

** 128Mb SPI Nor Flash, bootable *** 1x SPI

SPI NOR flash: ...c/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]

This issue is caused by InfiniTime 0.8.2 that put the external SPI flash memory to sleep before switching the display off and by the bootloader that * Flash light application

* 2MB Embedded Flash * [https://github.com/stschake/bl60x-flash bl60x-flash] is in Python and has been reported successful on MacOS catalina (10.15.6)

* on-board 128Mbit (16MByte) XSPI NOR flash memory - bootable SPI NOR Flash information:

...neTab2 is capable of running different operating systems from the internal flash memory (eMMC) and from microSD card. Further you need to flash the image to the microSD card. This can be done using various tools, for ex

...doc/rock64/tools/AndroidTool_Release_v2.38.zip Tools that allows developer flash image into eMMC's Loader/Parameter/Misc/Kernal/Boot/Recovery/System/Backup * 128Mbit (16MB) on-board SPI flash memory (empty by default) - bootable? Usually accessible as a [http://linux

* On-board 16 Mbit (2 MB) or 128 Mbit (16 MB) XSPI NOR flash memory * 26 GPIO pins, including SPI, I²C and UART functionality, possible I²S and GMII ex

! scope="row" | SPI | <code>rockchip-spi</code>

...MiPi CSI interface, as well as many other device interfaces such as UART, SPI, I²C, for makers to integrate with sensors and other peripherals Natively the board only supports booting the platform firmware from SPI, the eMMC or a microSD card, see [[#Boot order|boot order]]. The platform f

...MiPi CSI interface, as well as many other device interfaces such as UART, SPI, I²C, for makers to integrate with sensors and other peripherals * SPI NOR flash memory (17)

* Upstream Fedora uses the SPI flash on the Pinebook Pro to manage U-Boot. Step 1. Flash Tow-Boot[https://github.com/Tow-Boot/Tow-Boot] to SPI

* Storage Memory: optional 128Mb SPI Flash and optional eMMC module from 8GB up to 128GB * SPI NOR Flash information:

# SPI flash .... The batches bought after July 2022 come with ''Tow-Boot'' flashed to the SPI, which offers additional functionality over ''U-Boot'' as bootloader.

...e PINE A64 with 2&nbsp;GB of LPDDR3 RAM memory, power management unit, SPI flash and integrated bootable microSD slot. The module features a SODIMM-DDR3 for

* Storage Memory: PINE A64 boards ''do not'' have built-in Flash memory but use '''bootable microSD Cards''' or USB attached storage. * TP - Touch Panel Port, SPI with interrupt

...ry, up to 128&nbsp;GB of eMMC flash storage, and 128&nbsp;Mbit of SPI boot flash. The I/O includes: 1 x micro SD card reader (bootable), 1 x USB 2.0, 1 x US ...or each peripheral is stored across reboots inside the keyboard's firmware flash memory.

...he image will be using the flash directly, we need to be considerate about flash memory usage. please use the flash storage with consideration, when using other apps as well, excess usage of

...cil-break-out-board/ Pinecil breakout board] lets you use JTAG, GPIO, A2D, SPI, and more. # [[Pinecil_Firmware#Flash_Mode|Flash Mode]]