Difference between revisions of "ROCK64 Software Releases"

From PINE64
Jump to navigation Jump to search
(6 intermediate revisions by 2 users not shown)
Line 78: Line 78:
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]


== LibreELEC [ALPHA] ==
== LibreELEC Nightly Build ==


http://files.pine64.org/sw/pine64_installer/json/libreelec.png
http://files.pine64.org/sw/pine64_installer/json/libreelec.png


=== LibreElec KODI Community Build Image [microSD / eMMC boot] [ALPHA / TEST IMAGES] ===
=== LibreElec KODI Community Build Image [microSD / eMMC boot] [NIGHTLY BUILD IMAGES] ===
* The LibreElec Kodi build still in Alpha stage, which means that it's not stable nor ready for prime-time use. New features are added weekly or monthly.
* The LibreElec Kodi build still in Alpha stage, which means that it's not stable nor ready for prime-time use. New features are added weekly or monthly.
* Unzip and DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
* Unzip and DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
* [http://test.libreelec.tv/ Latest nightly build; please look for the RK3328 images with rock64 in the suffix]
* [http://kwiboo.libreelec.tv/test/ Latest alpha release from Kwiboo; please look for the RK3328 images with rock64 in the suffix]
* [http://kwiboo.libreelec.tv/test/ Latest alpha release from Kwiboo; please look for the RK3328 images with rock64 in the suffix]


Line 90: Line 91:


http://files.pine64.org/sw/pine64_installer/json/omv.png
http://files.pine64.org/sw/pine64_installer/json/omv.png
=== Jessie OpenMediaVault Community Build Image [microSD to eMMC] [0.5.15-136] by ayufan ===
* [https://www.openmediavault.org/ openmediavault is the next generation network attached storage (NAS) solution, click link to OMV main page]
* DD image to microSD card. Highly recommend using [https://etcher.io/ Etcher]
** Shorting the eMMC PIN with a jumper as shown on the 1st image of [http://files.pine64.org/doc/rock64/guide/ROCK64_Installing_Android_To_eMMC.pdf Guide to install stock Android build to eMMC module]. After power ON the box for 2-3 second, quickly remove the jumper. After boot, it will prompt for confirmation 'Y' to start writing the new image to the eMMC. Then follow the instructions on the screen
'''* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases'''
*
* [https://github.com/ayufan-rock64/linux-build/releases/ Release notes on ayufan Linux github]
* [http://files.pine64.org/os/ROCK64/omv/jessie-openmediavault-rock64-0.5.15-136-armhf_sd2emmc.img.xz Direct download from pine64.org]
* [http://cdn.pine64.uk/os/ROCK64/omv/jessie-openmediavault-rock64-0.5.15-136-armhf_sd2emmc.img.xz Direct download from pine64.uk]
** MD5 (XZ file): 7E423EF9146EA15403E7D1B4EA30594A
** File Size: 487MB
** Credentials (console/ssh, except OMV): rock64/rock64
** Credentials (OMV for Web): admin/openmediavault
** Credentials (OMV for console): root/openmediavault
* [[OpenMediaVault|OpenMediaVault Basic Setup]]
* [http://omv-extras.org/joomla/index.php/omv-plugins-3/3-stable OpenMediaVault Plugins]


=== Stretch OpenMediaVault OS Image armhf [microSD / eMMC Boot] [0.7.8] ===
=== Stretch OpenMediaVault OS Image armhf [microSD / eMMC Boot] [0.7.8] ===
Line 161: Line 179:
* You can follow the ongoing discussion about Slackware on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=5868)
* You can follow the ongoing discussion about Slackware on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=5868)


=== Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20180508] ===
=== Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20180901] ===
* System without a graphical shell
* System without a graphical shell
* DD image to microSD card and boot. Highly recommend using [https://etcher.io/ Etcher]
* DD image to microSD card and boot. Highly recommend using [https://etcher.io/ Etcher]
** [http://files.pine64.org/os/ROCK64/slackware/slack-current-aarch64-miniroot_08May18-4.4.126-rock64-build-20180508.img.xz Direct download from pine64.org]
** [http://files.pine64.org/os/ROCK64/slackware/slack-current-aarch64-miniroot_18Aug18-4.4.153-rock64-build-20180901.img.xz Direct download from pine64.org]
** [http://cdn.pine64.uk/os/ROCK64/slackware/slack-current-aarch64-miniroot_08May18-4.4.126-rock64-build-20180508.img.xz Direct download from pine64.uk]
** [http://cdn.pine64.uk/os/ROCK64/slackware/slack-current-aarch64-miniroot_18Aug18-4.4.153-rock64-build-20180901.img.xz Direct download from pine64.uk]
*** MD5 (XZ file): d87bcd4c62221b02ee3083610cbbca7f
*** MD5 (XZ file): 7d9395c792beab99453e861fa13e22e7
*** File Size: 166MB
*** File Size: 183MB


=== Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20180508] ===
=== Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20180508] ===
Line 275: Line 293:
* Please allow 10-15 minutes boot up time on first time for initialization
* Please allow 10-15 minutes boot up time on first time for initialization
* [http://files.pine64.org/os/ROCK64/android/rock64_20180606_stock_android_8.1_emmcboot.img.xz Direct download from pine64.org]
* [http://files.pine64.org/os/ROCK64/android/rock64_20180606_stock_android_8.1_emmcboot.img.xz Direct download from pine64.org]
** MD5 (XZ file): B9133B6C0B2ECAC57E363A5351D7E58E
** MD5 (XZ file): C05846B89A6483DA911CEA604627524F
** File Size: 561MB
** File Size: 561MB



Revision as of 07:03, 25 September 2018

Linux Image Releases

Armbian

armbian.png

Armbian Debian Stretch Desktop [microSD / eMMC Boot] [5.42]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Ubuntu 16.04 Xenial Desktop [microSD / eMMC Boot] [5.42]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Debian Stretch

debian.png

Debian Stretch Minimal 64bit OS Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic

penguin.png

Ubuntu 18.04 Bionic LXDE Desktop Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic minimal 64bit Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic minimal 32bit Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic Containers Image (DockerCE & Kubernetes)[microSD / eMMC Boot] [0.7.8]

LibreELEC Nightly Build

libreelec.png

LibreElec KODI Community Build Image [microSD / eMMC boot] [NIGHTLY BUILD IMAGES]

OpenMediaVault

omv.png

Jessie OpenMediaVault Community Build Image [microSD to eMMC] [0.5.15-136] by ayufan

* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases

Stretch OpenMediaVault OS Image armhf [microSD / eMMC Boot] [0.7.8]

Stretch OpenMediaVault OS Image arm64 [microSD / eMMC Boot] [0.7.8]

NextCloudPi

nextcloudpi.png

NextCloudPi Community Build Image [microSD Boot] [2018_05_10]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the PINE64 forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234

Lakka

lakka.png

Lakka Community Build Image [microSD / eMMC Boot]

  • Lakka The open source game console; a lightweight Linux distribution that transforms the Rock64 into a full blown retrogaming console
  • Visit PINE64 forum for more information about the Lakka release
  • DD image to microSD card and boot. Highly recommend using Etcher
    • [le.builds.lakka.tv/Rockchip.ROCK64.arm/Lakka-Rockchip.ROCK64.arm-2.1.img.gz Direct download from Lakka]
  • Lakka Basic Setup

Slackware

slackware.png

Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20180901]

Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20180508]

  • Login with
    • Username : root
    • Password : password
  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_08May18-4.4.126-rock64-build-20180508.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.

DietPi

dietpi.png

DietPi Community Build Image [microSD boot]


Volumio Digital Audio Player

volumio.png

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.390-2018-03-27]

  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • You can follow the ongoing discussion about Volumio on the PINE64 forum
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/


Fedora

fedora.png

Fedora Minimal Community Build Image [microSD boot] [Preliminary Build]


Yocto

yocto.png


BSD Image Releases

NetBSD

Netbsd.png

  • To learn more about NetBSD please visit NetBSD main page
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
    • [www.invisible.ca/arm/201807241220Z/NetBSD-evbarm-aarch64-201807241220Z-rock64.img.gz Download directly from NetBSD]
    • size: 336MB
  • Console and SSH default login:
    • username: root
    • password: [none]
  • Instructions concerning enabling SSH can be found here


OpenBSD

Openbsd.png

Android Image Releases

Android 8.x eMMC

android_8.png

Android 8.1. Stock Image [eMMC Boot] using DD method [20180606]

  • DD image to eMMC module. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): C05846B89A6483DA911CEA604627524F
    • File Size: 561MB

Android 8.1. Stock Image [eMMC Boot] using ROCKChip tools method [20180606]


Android 8.x

android_8.png

Android 8.1. Stock Image [microSD Boot] [20180623]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): 85372A568C114ADE7CD9632CEBA193E9
    • File Size: 575MB


Android 7.x eMMC

android_7.png

Android 7.1.2 Stock Image [microSD to eMMC] [Rooted] [20171204]

  • DD image to microSD card. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 43443467DFCAEDE767556843EB4D6707
    • File Size: 558MB
  • Set MacAddress on ROCK64

Android 7.1.2 Stock Image [eMMC Boot] [Rooted] [20171204]


Android 7.x

android_7.png

Android 7.1.2 Stock Image [microSD Boot] [Rooted] [20171204]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 56520ED3DB6E587DA140AD314A055EB2
    • File Size: 544MB


Android TV 7.x eMMC

android_7.png

Android TV 7.1 Community Build Image [microSD to eMMC] [v0.3.4-r86] by ayufan

Android TV 7.1 Community Build Image [eMMC] by ayufan


Android TV 7.x

android_7.png

Android TV 7.1 Community Build Image [microSD Boot] by ayufan


Android SDK

Android Oreo [v8.1]